Hikvision DS-7732NI-I4/16P-12TB NVR User Manual

1. Pengenalan

This manual provides essential instructions for the installation, operation, and maintenance of your Hikvision DS-7732NI-I4/16P-12TB Network Video Recorder (NVR). This NVR is a 32-channel device supporting H.264 and H.265 video compression, resolutions up to 12MP, and features an integrated 16-port Power over Ethernet (PoE) switch. It includes 4 SATA interfaces for storage, with 12TB of pre-installed capacity, and HDMI output for local display.

Please read this manual thoroughly before operating the device and retain it for future reference. Ensure all safety precautions are observed during installation and operation.

Langkah-langkah Keselamatan

• Gunakan hanya penyesuai kuasa yang dinyatakan untuk peranti ini.
• Pastikan pengudaraan yang betul untuk mengelakkan terlalu panas.
• Elakkan daripada mendedahkan peranti kepada cecair atau suhu yang melampau.
• Jangan cuba membuka atau mengubah suai peranti. Rujuk semua servis kepada kakitangan yang berkelayakan.

2. Persediaan

2.1 Membongkar dan Pemeriksaan

Carefully unpack the NVR and check the contents against the packing list. Inspect the device for any signs of damage during transit. If any items are missing or damaged, contact your supplier immediately.

2.2 Pemasangan Fizikal

The DS-7732NI-I4/16P-12TB NVR is designed for rack-mounting or desktop placement. Ensure the installation location is stable, well-ventilated, and free from excessive dust or moisture.

Kuasa Penyambung

• Connect the provided power cable to the NVR's power input and then to a grounded power outlet.

Menghubungkan Rangkaian

• Connect an Ethernet cable from the NVR's LAN port to your network router or switch.

Paparan Menyambung

• Connect an HDMI cable from the NVR's HDMI output port to a monitor or TV.

Connecting Cameras (PoE)

• Connect IP cameras directly to the NVR's 16 PoE ports using Ethernet cables. The NVR will provide power and data connectivity.

Figure 1: Rear panel connections of the Hikvision DS-7732NI-I4/16P-12TB NVR, illustrating the power input, LAN port, HDMI output, and the 16 PoE ports for camera connections.

Hard Drive Installation (if applicable)

The NVR comes with 12TB pre-installed. If additional drives are needed or replacement is required, follow these steps:

1. Power off the NVR and disconnect all cables.
2. Remove the NVR cover screws and slide off the cover.
3. Mount the hard drive(s) into the drive bays using the provided screws.
4. Connect the SATA data and power cables to the hard drive(s) and the NVR motherboard.
5. Replace the cover and secure the screws.

2.3 Tatarajah Awal

Powering On and First-Time Wizard

• After connecting all necessary cables, power on the NVR.
• The NVR will boot up and display a first-time setup wizard on the connected monitor.
• Follow the on-screen prompts to set up a strong administrator password, configure network settings (DHCP or static IP), and set the date and time.

Menambah Kamera IP

• The NVR will typically auto-detect Hikvision cameras connected to its PoE ports.
• For manual addition or third-party cameras, navigate to Configuration > IP Camera > Add.
• Enter the camera's IP address, protocol, port, username, and password.

3. Beroperasi

3.1 Navigasi Antara Muka Pengguna

The NVR can be accessed via a local monitor, web browser, or client software (e.g., iVMS-4200). The local interface is navigated using a mouse.

Menu Utama Selesaiview

• Langsung View: Displays real-time camera feeds.
• Main balik: Accesses recorded footage.
• Konfigurasi: System settings, camera management, recording schedules.
• Acara: Alarm and event management.
• Tutup: Safely powers off or restarts the NVR.

3.2 Langsung View

Daripada Live View screen, you can monitor all connected cameras. Double-click a camera feed to view it in full screen. Use the layout options to display multiple cameras simultaneously (e.g., 4, 9, 16, 32 channels).

Figure 2: The Live View interface of the NVR, displaying multiple camera streams in a grid layout, with options for channel selection and layout customization.

3.3 Rakaman

To configure recording settings, navigate to Konfigurasi > Rekod > Jadual.

• Rakaman Berterusan: Records constantly.
• Rakaman Pengesanan Gerak: Merakam hanya apabila gerakan dikesan.
• Rakaman Penggera: Records when an alarm event is triggered.
• Rakaman Manual: Click the record icon in Live View to start/stop recording manually.

3.4 Main semula

Untuk mengakses foo yang dirakamtage, pergi ke Main balik daripada menu utama.

• Select the desired camera(s) and date.
• Use the timeline to navigate through recorded events. Different colors on the timeline indicate different recording types (e.g., continuous, motion).
• Use the playback controls (play, pause, fast forward, rewind) to review footage.
• Untuk mengeksport footage, select the desired segment and click the Klip or Eksport butang.

3.5 Pengurusan Penggera

Configure alarm events and responses via Configuration > Event.

• Pengesanan Pergerakan: Define detection areas and sensitivity for each camera.
• Video Tampering: Detects if a camera's view is obstructed or altered.
• Line Crossing/Intrusion Detection: Set up virtual lines or areas to trigger alarms.
• Tindakan Penggera: Configure actions such as recording, sending email notifications, triggering alarm outputs, or sounding a buzzer.

3.6 Tetapan Sistem

Access various system settings via Configuration > System.

• Umum: Date and time, language.
• Pengurusan pengguna: Create, modify, or delete user accounts and assign permissions.
• Storan: View HDD status, format drives, configure overwrite settings.
• Rangkaian: Adjust IP address, DNS, port settings.

4. Penyelenggaraan

4.1 Kemas Kini Perisian Tegar

Regularly check for firmware updates on the official Hikvision website. Firmware updates can provide new features, performance improvements, and security enhancements.

• Muat turun perisian tegar yang betul file for your NVR model.
• Transfer the firmware to a USB drive.
• Navigasi ke Configuration > System > Maintenance > Upgrade dan ikut arahan pada skrin.
• Do not power off the NVR during the upgrade process.

4.2 Pengurusan Cakera Keras

Monitor the health of your hard drives via Konfigurasi > Storan > HDD. If a drive shows errors or fails, replace it promptly. You can also format drives from this menu.

4.3 Sandaran dan Pemulihan Sistem

It is recommended to regularly back up your NVR's configuration settings. This can be done via Configuration > System > Maintenance > Import/Export. You can export the configuration to a USB drive and restore it if needed.

4.4 Pembersihan

Periodically clean the NVR's exterior with a soft, dry cloth. Ensure ventilation openings are free from dust to maintain proper airflow and prevent overheating.

5. Penyelesaian masalah

This section addresses common issues you might encounter. For more complex problems, refer to the Hikvision support webtapak atau hubungi sokongan teknikal.

6. Spesifikasi

The following table outlines the key technical specifications for the Hikvision DS-7732NI-I4/16P-12TB NVR.

7. Waranti dan Sokongan

7.1 Maklumat Waranti

For specific warranty terms and conditions applicable to your Hikvision DS-7732NI-I4/16P-12TB NVR, please refer to the warranty card included with your product or the official Hikvision webtapak. Perlindungan waranti biasanya termasuk kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

7.2 Sokongan Teknikal

Should you require technical assistance, please visit the official Hikvision support website. You can find comprehensive FAQs, troubleshooting guides, software downloads, and contact information for technical support. When contacting support, please have your NVR model number (DS-7732NI-I4/16P-12TB) and serial number readily available.

Official Hikvision Support: https://www.hikvision.com/us/support/