iFlight 43234-1976

iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

Model: 43234-1976

pengenalan

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

Ciri-ciri Produk

  • Jenis Penyambung: 2.4G receiver antenna with IPEX 4 Generation connector.
  • Panjang: 5.9 inches (150mm) total length.
  • Bahan: RF113 Silver plated Wire Material for enhanced signal transmission.
  • Prestasi: Precision machining ensures low loss signal stability and high sensitivity.
  • Keserasian: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

Kandungan Pakej

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

A bundle of iFlight 2.4G receiver antennas with IPEX 4 connectors.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

Persediaan dan Pemasangan

  1. Identify Connector Type: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
  2. Comparison image showing the 'new version IPEX4' connector next to a 'regular version IPEX (bigger port)'.

    Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

  3. Sambung ke Penerima: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
  4. Peletakan Antena: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
  5. Antena Selamat: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
A FrSky receiver with an iFlight 2.4G receiver antenna connected.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

Arahan Operasi

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

Penyelenggaraan

  • Pemeriksaan Berkala: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
  • Kebersihan: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
  • Storan: When not in use, store the antennas in a dry, cool place, protected from physical damage.
  • Penggantian: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

Menyelesaikan masalah

Problem: Poor Signal / Frequent Failsafes
  • Semak Sambungan: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
  • Peletakan Antena: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
  • Kerosakan Antena: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
  • Receiver Issues: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
Problem: Antenna Does Not Fit
  • Verify Connector Type: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

Spesifikasi

Parameter Nilai
Nombor Model 43234-1976
Jenis Antena 2.4G Receiver Antenna
Jenis Penyambung IPEX 4 Generation
Panjang 150mm (5.9 inci)
Bahan Kawat RF113 Silver plated
Impedans 50 Ohm
Julat Kekerapan 2400 - 2500 MHz
SWR <= 2.0
Keuntungan 2
Suhu Operasi -40 °C hingga +65 °C
Suhu Penyimpanan -40 °C hingga +80 °C
Item Weight (per antenna) Approximately 0.5g (as shown in product images)
An iFlight 2.4G receiver antenna laid out next to a ruler, indicating its 150mm length.

Image: The 150mm length of the antenna measured against a ruler.

An iFlight 2.4G receiver antenna coiled on a digital scale, showing a weight of 0.5g.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

Video Produk Rasmi

Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)

Waranti dan Sokongan

For warranty information and technical support, please refer to the official iFlight weblaman web atau hubungi khidmat pelanggan mereka secara langsung. Terma jaminan khusus mungkin berbeza mengikut wilayah dan peruncit.

Dokumen Berkaitan - 43234-1976

Praview Manual Arahan Drone FPV iFlight CineBee 75 HD
Manual arahan komprehensif untuk dron FPV iFlight CineBee 75 HD, meliputi persediaan, pengikatan, kawalan penerbangan, penyelenggaraan dan penyelesaian masalah. Belajar untuk mengendalikan dron anda dengan selamat dan berkesan.
Praview iFlight BLITZ 1.6W VTX: Panduan Persediaan dan Operasi
Arahan komprehensif untuk iFlight BLITZ 1.6W VTX, meliputi spesifikasi, perihalan port, gambar rajah sambungan, fungsi butang dan jalur frekuensi untuk persediaan sistem FPV yang optimum.
Praview iFlight SucceX-D Mini F7 TwinG Flight Controller Wiring Guide
Comprehensive wiring diagram and setup guide for the iFlight SucceX-D Mini F7 TwinG flight controller, detailing connections for DJI, FrSky, TBS, and Spektrum receivers, ESC, GPS, and LED/Buzzer modules. Includes Betaflight configuration notes.
Praview iFlight BLITZ WHOOP 1.6W VTX: Panduan Pemasangan dan Operasi
Arahan komprehensif untuk iFlight BLITZ WHOOP 1.6W VTX, meliputi spesifikasi, sambungan port, fungsi butang, gambar rajah pendawaian, jadual kekerapan dan titik perhatian penting untuk sistem FPV dron.
Praview iFlight Borg 5S RX FC Wiring Diagram and Specifications
Detailed wiring diagram and technical specifications for the iFlight Borg 5S RX FC, including receiver details, VTX control, and compatibility information for drone builders.
Praview Gambarajah Pendawaian dan Panduan Persediaan Pengawal Penerbangan iFlight BLITZ ATF435
Gambarajah pendawaian terperinci dan arahan persediaan untuk pengawal penerbangan iFlight BLITZ ATF435, meliputi sambungan untuk pemancar digital DJI, pelbagai penerima, ESC dan peranti persisian. Termasuk panduan persediaan untuk Betaflight.