Anderic RR7096T Thermostatic Remote Control Instruction Manual

1. Pengenalan

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Anderic RR7096T Thermostatic Remote Control. This remote is designed as a direct replacement for original Hampton Bay and Harbor Breeze ceiling fan remotes, specifically those with FCC IDs such as CHQ7096T, UC7096T, CHQ8BF7096T, and CHQ8BT7096T.

The RR7096T offers control over fan speeds, light functions (including dimming), and thermostatic settings. It is important to note that this remote operates only the down-lights of a ceiling fan and does not include a 'Reverse' key for fan direction. For proper light dimming functionality, incandescent bulbs are required.

2. Maklumat Keselamatan

• Jauhkan bateri daripada kanak-kanak.
• Jangan campurkan bateri lama dan baharu, atau jenis bateri yang berlainan.
• Buang bateri terpakai mengikut peraturan tempatan.
• Avoid exposing the remote control to extreme temperatures, moisture, or direct sunlight.

3. Kandungan Pakej

Sahkan bahawa pakej anda mengandungi item berikut:

• Anderic RR7096T Thermostatic Remote Control
• Pendakap pelekap dinding
• Two screws for wall mount installation

4. Persediaan

4.1. Pemasangan Bateri

1. Tanggalkan penutup petak bateri di belakang alat kawalan jauh.
2. Masukkan empat (4) bateri AAA, pastikan kekutuban (+/-) betul.
3. Gantikan penutup petak bateri.

4.2. Dip-Switch Matching

The RR7096T remote control operates by matching its dip-switch settings to those of your ceiling fan's receiver. This is the primary method of pairing the remote with your fan.

1. Locate the dip-switches inside the battery compartment of your new RR7096T remote.
2. Identify the dip-switches on your existing ceiling fan receiver or original remote control. The receiver is typically located in the ceiling fan's canopy.
3. Carefully match the position of the dip-switches (ON/OFF or UP/DOWN) on the new RR7096T remote to the exact pattern of your fan's receiver or original remote.
4. Once the dip-switches are matched, the remote should operate your ceiling fan without further programming.

Rajah 1: Back of the Anderic RR7096T remote control, illustrating the battery compartment and the internal dip-switches that must be matched to your ceiling fan receiver for proper operation.

4.3. Pemasangan Pemasangan Dinding

The included wall mount bracket allows for convenient storage of your remote control.

1. Choose a suitable location on a wall, away from direct heat or moisture.
2. Use the two provided screws to securely attach the wall mount bracket to the wall.
3. Slide the remote control into the bracket for storage.

Rajah 2: The Anderic RR7096T remote control securely placed in its transparent wall mount bracket, demonstrating how it can be stored when not in use.

5. Arahan Operasi

The Anderic RR7096T remote control features a clear LCD display and dedicated buttons for various functions. Refer to the image below for button identification.

Rajah 3: Depan view of the Anderic RR7096T remote control, displaying its LCD screen and various control buttons for fan and light functions.

5.1. Kawalan Kipas

• Kipas Hidup / Mati: Press the blue fan button to cycle through fan speeds (Low, Medium, High) and turn the fan off.
• AUTO KIPAS: Activates the thermostatic fan control. The fan will automatically adjust its speed based on the room temperature and your set temperature.
• PEMASA KIPAS: Sets a timer for the fan to operate for a specified duration.
• TEMP./SET HOUR (Up/Down Arrows): Adjusts the desired temperature for FAN AUTO mode or sets the hour for timer functions.

5.2. Kawalan Cahaya

• Hidup / Mati / Peredupan Cahaya: Press the yellow light button to turn the down-lights on or off. Hold the button to dim or brighten the lights.
• LIGHT TIMER: Sets a timer for the light to turn off after a specified duration.
• LIGHT DELAY: Activates a delay for the light to turn off, allowing time to exit the room.

Nota Penting: This remote control is designed to operate only the down-lights of your ceiling fan. It will not control separate up-lights if your fan is equipped with them. For proper dimming functionality, ensure your fan uses incandescent bulbs.

6. Penyelenggaraan

6.1. Penggantian Bateri

When the remote's display becomes dim or its response time slows, it is time to replace the batteries. Follow the battery installation steps in Section 4.1.

6.2. Pembersihan

Lap alat kawalan jauh dengan kain lembut dan kering. Jangan gunakan pembersih yang kasar atau rendam alat kawalan jauh di dalam air.

7. Penyelesaian masalah

• Jauh tidak bertindak balas:
  • Periksa tahap bateri dan ganti jika perlu.
  • Verify that the dip-switches in the remote match the settings of your ceiling fan receiver (refer to Section 4.2).
  • Ensure there are no obstructions between the remote and the fan receiver.
• Lights not dimming properly:
  • Confirm that your ceiling fan uses incandescent bulbs. LED or CFL bulbs may not dim correctly with this remote.
• Fan not operating at desired speed in AUTO mode:
  • Check the set temperature on the remote's display and adjust using the TEMP./SET HOUR buttons.

8. Spesifikasi

9. Maklumat Waranti

The Anderic RR7096T Thermostatic Remote Control comes with a Waranti Penggantian 1 Tahun. Please retain your proof of purchase for warranty claims. For details on how to claim your warranty, refer to the manufacturer's official webtapak atau hubungi sokongan pelanggan mereka.

10. Sokongan

For further assistance, troubleshooting tips, or to inquire about compatible receivers (such as UC7067FCRX or UC70960TX if needed), please visit the official Anderic webtapak atau hubungi bahagian sokongan pelanggan mereka. Maklumat hubungan biasanya boleh didapati pada pembungkusan produk atau pengeluar webtapak.