1. Pengenalan
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Fantech PB370-2 Inline Exhaust Fan. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.
2. Maklumat Keselamatan
AMARAN: Untuk mengurangkan risiko kebakaran, renjatan elektrik atau kecederaan kepada orang, perhatikan perkara berikut:
- Sentiasa putuskan kuasa pada panel servis sebelum menservis atau membersihkan unit.
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes.
- Do not use this fan with any solid-state speed control device unless specifically approved by Fantech for use with this fan.
- Unit ini mesti dibumikan dengan betul.
- Do not use this fan in areas where flammable or explosive materials are present.
- To prevent motor damage and noisy/unbalanced impellers, keep drywall spray, construction dust, and other debris off the power unit.
3. Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- Fantech PB370-2 Inline Exhaust Fan Unit
- Dual Grille Kit (includes components for 6-inch and 8-inch duct connections)
- Pemasangan Pendakap dan Perkakasan
- Kord Kuasa
- Manual Arahan (dokumen ini)
This image displays the Fantech PB370-2 inline exhaust fan unit along with two separate grille assemblies, indicating its dual-grille capability for different duct sizes.
4. Persediaan dan Pemasangan
The Fantech PB370-2 is designed for inline installation within ductwork. Proper installation is crucial for optimal performance and safety.
4.1 Mounting the Fan Unit
- Select a suitable location for the fan unit, typically in an attic, crawl space, or utility closet, away from the living area to minimize noise.
- Ensure the chosen location allows for easy access for future maintenance.
- Use the provided mounting brackets to securely fasten the fan unit to a sturdy surface (e.g., ceiling joists, rafters). Ensure the fan is level.
4.2 Sambungan Salur
The PB370-2 supports both 6-inch and 8-inch duct connections using the included dual grille kit.
- Connect appropriate size ducting (flexible or rigid) to both the inlet and outlet ports of the fan unit.
- Secure all duct connections with duct clamps or appropriate fasteners and seal with duct tape or mastic to prevent air leakage.
- Install the chosen grille(s) in the desired location(s) in the room(s) to be ventilated. Connect the grille(s) to the fan unit via ductwork.
- Minimize bends and turns in the ductwork to ensure maximum airflow efficiency.
4.3 Pendawaian Elektrik
All electrical connections must comply with local electrical codes.
- Ensure power is disconnected at the main service panel before proceeding.
- Connect the provided power cord to a suitable power source. Refer to the fan's label for specific voltage requirements (12 Volts as per specifications).
- Pastikan semua sambungan pendawaian selamat dan terlindung dengan betul.
- The fan must be properly grounded to prevent electrical shock.
5. Arahan Operasi
Once properly installed and wired, the Fantech PB370-2 Inline Exhaust Fan operates by drawing air from the ventilated space through the ductwork and expelling it. Operation is typically controlled via a wall switch connected to the fan's power supply.
- Menghidupkan/Mematikan: Use the designated wall switch to activate or deactivate the fan.
- Aliran udara: Ensure grilles are unobstructed for optimal airflow.
6. Penyelenggaraan
Regular maintenance ensures the longevity and efficient operation of your exhaust fan.
6.1 Pembersihan
- AMARAN: Disconnect power at the service panel before performing any maintenance.
- gril: Periodically remove and clean the grilles with a mild detergent and water. Allow them to dry completely before reinstallation.
- Bilah Kipas: If accessible, carefully wipe down the fan blades with a damp cloth to remove dust and debris. Avoid bending the blades.
6.2 Pemeriksaan
- Inspect ductwork for any signs of damage, leaks, or obstructions.
- Periksa sambungan elektrik untuk kesesakan dan tanda-tanda haus.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kipas tidak dihidupkan | Tiada kuasa kepada unit Sambungan pendawaian yang salah Kerosakan motor | Periksa pemutus litar/fius Pastikan semua sambungan elektrik selamat Hubungi kakitangan perkhidmatan yang berkelayakan |
| Pengurangan aliran udara | Obstructed grilles or ductwork Saluran bocor Bilah kipas kotor | Clean grilles and check ductwork for obstructions Seal any duct leaks Clean fan blades (after disconnecting power) |
| Kebisingan yang berlebihan | Pemasangan longgar Fan blades unbalanced or dirty Motor bearing issue | Pastikan kipas dipasang dengan kukuh Clean fan blades and check for damage Hubungi kakitangan perkhidmatan yang berkelayakan |
8. Spesifikasi
- Jenama: FANTECH
- model: PB370-2
- Voltage: 12 Volt
- Kelajuan Putaran Maksimum: 1800 RPM
- Kapasiti Aliran Udara: 360 Kaki Kubik Seminit (CFM)
- ASIN: B01N55FBOY
- Tarikh Pertama Tersedia: 30 Mac 2022
9. Waranti dan Sokongan
Warranty information for the Fantech PB370-2 Inline Exhaust Fan is typically provided with the product at the time of purchase or can be found on the official Fantech website. For technical support, troubleshooting assistance, or to inquire about warranty claims, please visit the official Fantech webtapak atau hubungi terus bahagian perkhidmatan pelanggan mereka.
Untuk maklumat lanjut, lawati FANTECH Store.
