1. Pengenalan
Terima kasih kerana membeliasing the Bunker Hill Security Battery Operated LED Motion Sensor Light. This device is designed to provide convenient, automatic illumination in indoor areas, enhancing security and visibility. Its motion-sensing capabilities ensure light is provided only when needed, conserving battery life. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
2. Maklumat Keselamatan
- Penggunaan Dalaman Sahaja: This product is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
- Keselamatan Bateri: Use only the specified type and size of batteries. Ensure correct polarity (+/-) when inserting batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period. Dispose of used batteries responsibly according to local regulations.
- Pemasangan: Ensure the mounting surface is stable and can support the weight of the light.
- Pembersihan: Do not use abrasive cleaners or solvents. Clean with a soft, dry cloth.
- Pembongkaran: Do not attempt to disassemble or modify the light. This will void the warranty and may cause damage or injury.
3. Kandungan Pakej
Sila semak pakej untuk item berikut:
- 1 x Battery Operated LED Motion Sensor Light Unit
- 1 x Alat Kawalan Jauh
- Mounting Hardware (screws/anchors, if applicable)
- Manual Pengguna (dokumen ini)
Imej 1: Depan view of the Bunker Hill Security Battery Operated LED Motion Sensor Light. The unit is white with a blue translucent top housing the LED, and a rectangular motion sensor window on the front face.
4. Persediaan dan Pemasangan
4.1 Pemasangan Bateri
This device requires batteries for operation (batteries are not included). Locate the battery compartment, typically on the back or bottom of the unit. Insert the required number and type of batteries (e.g., AA, AAA, C, D – check the compartment for specific markings) ensuring correct polarity (+ and -). Close the battery compartment securely.
4.2 Pemasangan
The light is designed for wall mounting. Choose an indoor location where the motion sensor will have an unobstructed view of the area you wish to monitor. Avoid placing it near heat sources, direct sunlight, or areas with strong air currents, as these can interfere with sensor performance.
- Mark the desired mounting position on the wall.
- Drill pilot holes if necessary, using a drill bit appropriate for your wall material and the provided mounting hardware.
- Insert wall anchors if required.
- Secure the light unit to the wall using the provided screws. Ensure it is firmly attached.
5. Operasi
Once batteries are installed and the unit is mounted, the motion sensor light is ready for operation.
- Pengaktifan Automatik: The light will automatically turn on when motion is detected within its sensing range in a dark environment.
- Penyahaktifan Automatik: After a period of no motion detection, the light will automatically turn off to conserve battery power. The duration the light stays on may vary based on the model.
- Kawalan Jauh: Use the included remote control to manually turn the light on/off or adjust settings if available (e.g., brightness, duration, sensitivity). Refer to the remote control's specific markings for its functions.
6. Penyelenggaraan
- Penggantian Bateri: When the light dims or fails to activate, it is time to replace the batteries. Follow the battery installation steps (Section 4.1).
- Pembersihan: Periodically wipe the light and sensor window with a soft, dry, lint-free cloth to remove dust and dirt. Do not use liquid cleaners or sprays directly on the unit.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Bateri mati atau tidak dipasang dengan betul. | Gantikan bateri, pastikan polariti yang betul. |
| Insufficient darkness for sensor activation. | Ensure the area is dark enough for the light sensor to activate. | |
| Sensor gerakan tersumbat atau kotor. | Clear any obstructions from the sensor window and clean it. | |
| Lampu sentiasa menyala. | Gerakan berterusan dikesan. | Ensure no continuous motion is within the sensor's range. Reposition the light if necessary. |
| Kerosakan sensor. | Remove batteries for a few minutes, then reinsert to reset the unit. If problem persists, contact support. |
8. Spesifikasi
- model: 0015817
- Jenama: Bunker Hill Security
- Jenis Sumber Cahaya: LED
- Lamp Jenis: LED
- Bilangan Sumber Cahaya: 1
- Sumber Kuasa: Dikuasakan Bateri
- Jenis Suis: Penderia Pergerakan
- Ciri Khas: Penderia Pergerakan
- Bahan: plastik
- Bahan asas: plastik
- Bahan teduhan: plastik
- Warna teduhan: putih
- warna: Blue (LED light color)
- Jenis Pemasangan: Lekap di dinding
- Penggunaan Dalaman/Luar: Dalaman
- Adakah Cordless?: ya
- Penggunaan yang Disyorkan: Keselamatan
9. Waranti dan Sokongan
For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Bunker Hill Security webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.
If you encounter any issues not covered in this manual, please contact the retailer or manufacturer's customer service for assistance.
