Steinel IS 360-1

Steinel IS 360-1 Recessed Motion Detector Instruction Manual

Model: IS 360-1 | Brand: Steinel

1. Pengenalan

The Steinel IS 360-1 is a high-performance infrared motion detector designed for recessed mounting. It offers a 360-degree detection angle and a maximum range of 4 meters, making it suitable for various indoor and outdoor applications such as under eaves, carports, and suspended ceilings. This detector is compatible with all bulb types, including up to six LEDs, and features optional permanent lighting. It provides adjustable time and twilight settings for customized operation.

2. Arahan Keselamatan

3. Produk Lebihview

The Steinel IS 360-1 is an infrared motion detector that responds to heat radiation from moving objects. Its compact design allows for discreet recessed installation. The sensor features a multi-lens system for precise detection.

jarak dekat view of the Steinel IS 360-1 recessed motion detector.

Rajah 3.1: Jarak dekat view of the Steinel IS 360-1 recessed motion detector.

Diagram showing the principle of an infrared sensor detecting heat radiation.

Figure 3.2: Illustration of how an infrared sensor detects heat radiation from moving objects.

4. Pemasangan (Persediaan)

The IS 360-1 is designed for recessed ceiling mounting. Ensure the mounting location is stable and provides adequate space for the device and wiring.

4.1 Dimensi Pemasangan

Technical drawing with dimensions for the Steinel IS 360-1 motion detector, showing a diameter of 78mm and a depth of 89mm.

Figure 4.1: Technical drawing with dimensions. The detector has a diameter of 78mm and requires a mounting depth of 89mm, with a cutout diameter of 66mm.

4.2 Langkah Pemasangan

  1. Sediakan Lubang Pemasangan: Create a circular cutout in the ceiling with a diameter of 66mm.
  2. Pendawaian: Connect the electrical wires to the terminal block inside the detector housing. Ensure correct polarity and secure connections. The device operates on 240 Volts.
  3. Insert Detector: Carefully push the detector into the prepared hole. The spring clips will secure it in place.
  4. Pelarasan Akhir: Ensure the sensor lens is facing the desired detection area.
Diagram illustrating the recessed ceiling installation of the Steinel IS 360-1 motion detector.

Figure 4.2: Illustration of the recessed ceiling installation process.

5. Operasi

Once installed and powered, the Steinel IS 360-1 motion detector will automatically switch on connected lights when it detects movement within its 360-degree detection zone. The light will remain on for the set time duration and will only activate when the ambient light level falls below the set twilight threshold.

Steinel IS 360-1 Recessed Motion Detector, white, installed in a ceiling.

Figure 5.1: The Steinel IS 360-1 motion detector installed in a ceiling, providing illumination upon detection.

6. Pelarasan Tetapan

The IS 360-1 offers continuous adjustment for both time and twilight settings, as well as the detection area.

6.1 Time Setting (Time)

This dial controls how long the light remains switched on after motion is detected. It is continuously adjustable from approximately 8 seconds to 35 minutes.

6.2 Twilight Setting (Lux)

This dial determines the ambient brightness level at which the sensor becomes active. Turning it towards the sun symbol means the sensor will only activate in brighter conditions (e.g., during the day), while turning it towards the moon symbol means it will activate in darker conditions (e.g., at dusk or night).

Image showing the adjustable dials for time and twilight settings on the Steinel IS 360-1 motion detector.

Figure 6.1: Adjustable dials for time and twilight settings.

6.3 Detection Area Adjustment

The 360-degree detection area can be precisely adapted to your needs using the supplied blanking segments. These segments can be inserted into the lens to block out specific areas where detection is not desired, preventing unwanted triggering (e.g., from public pathways).

Diagram illustrating the 360-degree detection area of the Steinel IS 360-1 motion detector and how blanking segments can be used to adjust it.

Figure 6.2: Diagram showing the 360-degree detection area and the use of blanking segments for customization.

7. Penyelenggaraan

The Steinel IS 360-1 motion detector is maintenance-free. For cleaning, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the lens or housing. Ensure no moisture enters the device.

8. Penyelesaian masalah

MasalahKemungkinan PuncaPenyelesaian
Light does not switch on.Tiada bekalan kuasa.
Twilight setting too high.
Detection area blocked.
Periksa sambungan kuasa.
Adjust twilight setting (towards moon symbol).
Check for obstructions in the detection zone.
Light switches on too frequently.Detection area too wide.
Tetapan masa terlalu lama.
Use blanking segments to narrow detection area.
Kurangkan tetapan masa.
Lampu kekal menyala secara berterusan.Permanent ON function activated (if applicable).
Pergerakan berterusan dalam kawasan pengesanan.
Check if permanent ON is enabled and disable if not desired.
Adjust detection area or time setting.

9. Spesifikasi

CiriSpesifikasi
Nombor Model032845
PengeluarSteinel
Dimensi (L x W x H)8.9 x 7.8 x 7.8 cm
Berat badan120 gram
warnaputih
Sumber KuasaElektrik Bertali
Voltage240 Volt
Maks. Kapasiti Penukaran1000 Watt
Keserasian Jenis MentolLED (up to 6), Incandescent, Halogen
Sudut Pengesanan360 darjah
Maks. Julat4 meter
Penetapan Masa8 saat - 35 minit (boleh laras secara berterusan)
Tetapan SenjaBoleh laras secara berterusan
Penarafan IPIP54
Jenis PemasanganLekapan Siling (Tersembunyi)
Suhu OperasiSehingga 40 Darjah Celcius
Negara AsalRomania

10. Waranti dan Sokongan

Steinel products are manufactured to the highest quality standards. This product comes with a 1-year availability of spare parts. For warranty claims, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official Steinel webtapak. Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Dokumen Berkaitan - IS 360-1

Praview Pengesan Gerakan Siling Inframerah ECO STEINEL IS 2360-3 | Spesifikasi & Pendawaian
Maklumat terperinci tentang pengesan gerakan siling inframerah STEINEL IS 2360-3 ECO, termasuk ciri-cirinya, spesifikasi teknikal, zon pengesanan dan gambar rajah pendawaian untuk pemasangan dan pengendalian.
Praview STEINEL IR QIR Quattro 8m Presence Detector - COM1
Technical specifications and functional overview of the STEINEL IR QIR Quattro 8m COM1, an in-ceiling infrared presence detector for professional indoor applications, detailing its detection capabilities, technical parameters, and installation options.
Praview Manual Pemasangan Sensor Gerakan Inframerah STEINEL IS 2180-2
Panduan komprehensif untuk memasang dan mengendalikan sensor gerakan inframerah STEINEL IS 2180-2, yang menampilkan julat, masa dan kepekaan cahaya yang boleh laras untuk kawalan pencahayaan yang andal.
Praview Panduan Pemasangan dan Maklumat Teknikal Sensor Inframerah STEINEL IS 2180 ECO
Panduan pemasangan dan spesifikasi teknikal yang komprehensif untuk sensor gerakan inframerah profesional STEINEL IS 2180 ECO. Termasuk persediaan, fungsi, penyelesaian masalah dan maklumat jaminan.
Praview Manual Pengguna dan Panduan Pemasangan Steinel XLED CAM 1 SC
Panduan komprehensif untuk lampu limpah LED pensuis Steinel XLED CAM 1 SC, meliputi pemasangan, konfigurasi, penggunaan dan penyelesaian masalah. Ketahui tentang cirinya, spesifikasi teknikal dan cara mengendalikannya melalui Aplikasi Steinel CAM.
Praview STEINEL IS 2180 ECO Infrarot-Sensor: Montageanleitung und Technische Daten
Detaillierte Anleitung für den STEINEL IS 2180 ECO Infrarot-Bewegungsmelder, inklusif Installationsschritten, technischen Spezifikationen, Funktionen und Fehlerbehebung.