BFT PhobosKit BT Pengendali Pintu Ayun Kediaman: Manual Arahan

1. Pengenalan

This manual provides essential instructions for the safe installation, operation, and maintenance of the BFT PhobosKit BT Swing Gate Operator Residential. Please read this manual thoroughly before beginning any installation or operation procedures. Proper understanding and adherence to these instructions are crucial for the longevity and safe functioning of the gate operator system.

2. Maklumat Keselamatan

AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan kecederaan serius atau kerosakan harta benda.

• Installation and repair must be performed by qualified personnel only.
• Putuskan sambungan kuasa sebelum melakukan sebarang perkhidmatan atau penyelenggaraan.
• Pastikan semua sambungan elektrik mematuhi kod elektrik tempatan dan kebangsaan.
• Jauhkan tangan dan pakaian longgar daripada bahagian yang bergerak.
• Jangan benarkan kanak-kanak bermain berhampiran pintu pagar atau mengendalikan alat kawalan.
• The gate operator is designed for swing gates only. Do not use for other applications.

3. Produk Lebihview dan Komponen

The BFT PhobosKit BT Swing Gate Operator Residential is a comprehensive kit designed for automating residential swing gates. The kit includes the following main components:

• Linear Actuator: The primary mechanism for opening and closing the gate.
• Papan kawalan: The electronic brain of the system, managing all operations.
• Pengkabelan: For electrical connections and communication between components.
• Reflective Photocell: A safety device to detect obstructions in the gate's path.
• Radio Transmitters (2 units): For remote control of the gate operator.
• Kurungan Pemasangan: For securing the actuator to the gate and post.

Figure 1: Main components of the BFT PhobosKit BT Swing Gate Operator. Shown are the linear actuator, the control board enclosure, two radio transmitters, and a reflective photocell.

4. Persediaan dan Pemasangan

Installation of the BFT PhobosKit BT Swing Gate Operator requires careful planning and adherence to electrical and mechanical safety standards. It is recommended that installation be performed by a certified professional.

4.1 Penyediaan Tapak

• Ensure the gate operates smoothly manually before installing the operator.
• Clear any obstructions from the gate's swing path.
• Verify adequate space for the actuator and control board.

4.2 Mounting the Actuator

Securely attach the linear actuator to the gate and post using the provided mounting brackets. Ensure the actuator is level and aligned correctly to prevent undue stress on the gate and operator.

4.3 Sambungan Elektrik

The system operates on 24VDC, powered by a 120VAC input. Connect the control board to the main power supply and the actuator according to the wiring diagram provided in the separate detailed installation guide. Install the reflective photocell and radio receiver as per instructions to ensure proper safety and remote control functionality.

5. Arahan Operasi

Once installed and configured, the BFT PhobosKit BT Swing Gate Operator can be operated using the provided radio transmitters.

5.1 Operasi Kawalan Jauh

• Press the designated button on the radio transmitter to open or close the gate.
• A second press during operation will typically stop the gate. A third press will reverse its direction.
• Ensure a clear line of sight to the gate and that no obstructions are present before operating.

5.2 Ciri-ciri Keselamatan

The system includes a reflective photocell that detects obstructions. If an obstruction is detected while the gate is closing, the gate will stop and reverse. The built-in thermal overload and torque limiting features protect the motor from damage due to excessive force or overheating.

6. Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your gate operator.

• Bulanan: Inspect the gate's movement for any signs of friction or misalignment. Check all mounting hardware for tightness.
• Suku tahunan: Clean the reflective photocell lenses to ensure proper operation. Check electrical connections for corrosion or damage.
• Setiap tahun: Have a qualified technician inspect the entire system, including motor, gears, and safety devices.

7. Penyelesaian masalah

If you encounter issues with your gate operator, refer to the following common troubleshooting steps:

• Gate not responding to remote: Check remote battery. Ensure the receiver is powered and connected.
• Gate stops unexpectedly: Check for obstructions in the gate's path, especially near the photocell. Clean photocell lenses.
• Gate moves slowly or with difficulty: Inspect the gate hinges and wheels for friction. Ensure the actuator is not obstructed.
• Tiada kuasa: Periksa bekalan kuasa utama dan pemutus litar.

For persistent issues, contact a qualified service technician.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, please refer to the documentation provided with your purchase or contact BFT customer support directly. Technical support and service inquiries should be directed to your authorized BFT dealer or installer.