Manual Pengguna UPS Interaktif Talian Njoy Horus Plus 800 VA

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Njoy Horus Plus 800 VA Line Interactive Uninterruptible Power Supply (UPS). Please read this manual thoroughly before installation and use, and retain it for future reference. The Njoy Horus Plus UPS is designed to protect sensitive electronic equipment from power fluctuations and outages, ensuring continuous operation and data integrity. Its line-interactive mode regulates voltage over a wide range for advanced AC filtering without activating backup mode, and the Automatic Voltage Regulation (AVR) system protects against electrical input damage from large power fluctuations.

2. Arahan Keselamatan

AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan kebakaran, kejutan elektrik atau kecederaan.

• Jangan buka UPS casing. Tiada bahagian yang boleh diservis oleh pengguna di dalamnya. Rujuk servis kepada kakitangan yang berkelayakan.
• Jangan sambungkan peralatan yang boleh membebankan UPS, seperti pencetak laser atau pembersih vakum.
• Pastikan UPS disambungkan ke soket kuasa AC yang dibumikan.
• Do not expose the UPS to rain, water, or excessive humidity.
• Place the UPS in a well-ventilated area, away from direct sunlight or heat sources.
• Ensure the total load of connected equipment does not exceed the UPS's rated capacity (800 VA / 480 W).
• In case of emergency, press the power button to turn off the UPS and disconnect it from the AC power source.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Njoy Horus Plus 800 VA UPS Unit
• Kabel Komunikasi USB
• Manual Pengguna (dokumen ini)
• CD perisian (atau arahan muat turun)

4. Produk Lebihview

4.1 Panel Depan

The front panel features the LCD touchscreen display and the power button. The LCD provides real-time information about the UPS status, including input/output voltage, kapasiti bateri, dan tahap beban.

4.2 Panel Belakang

Panel belakang termasuk:

• Kord Kuasa Input AC: Connects the UPS to the wall outlet.
• Schuko Outlets (x2): Provide battery backup and surge protection for connected devices.
• Port Komunikasi USB: Untuk menyambung ke komputer bagi perisian pemantauan dan pengurusan.
• RJ11/RJ45 In/Out Ports: Provide surge protection for telephone/network lines.
• Butang Tetapkan Semula: Used to reset the UPS in certain error conditions.

4.3 Paparan LCD

The LCD touchscreen displays critical operational data. Users can tap the screen to cycle through information such as:

• Input Voltage
• Keluaran Voltage
• Kapasiti Bateri
• Tahap Beban
• Operating Mode (AC, Battery, AVR)

5. Persediaan

1. Membongkar: Keluarkan UPS dari pembungkusannya dengan berhati-hati. Periksa sebarang kerosakan penghantaran.
2. penempatan: Position the UPS on a flat, stable surface in a cool, dry, and well-ventilated area. Avoid direct sunlight, heat sources, and moisture. Ensure adequate clearance around the ventilation openings.
3. Pengecasan Awal: Connect the UPS to a standard grounded AC wall outlet using its integrated power cord. Allow the UPS to charge for at least 8 hours before connecting any devices to ensure optimal battery performance. The LCD will indicate battery charging status.
4. Menyambung Peranti:
   • Plug your computer, monitor, and other critical electronic equipment into the Schuko outlets on the rear panel.
   • For surge protection of telephone or network lines, connect the incoming line to the "IN" RJ11/RJ45 port and connect your device to the "OUT" port.
5. Pemasangan Perisian (Pilihan): Connect the USB cable from the UPS to your computer. Install the included management software (refer to the software's specific instructions for installation). This software allows for advanced monitoring, configuration, and automatic shutdown of your computer during extended power outages.

6. Arahan Operasi

6.1 Turning On the UPS

After initial charging, press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the LCD display illuminates. The UPS will perform a self-test and then enter AC mode, providing power to connected devices.

6.2 Turning Off the UPS

Press and hold the power button for approximately 2 seconds until you hear a beep and the LCD display turns off. This will shut down the UPS and cut power to connected devices.

6.3 LCD Touchscreen Operation

Tap the LCD screen to cycle through various display modes, showing real-time information such as input voltage, keluaran voltage, battery charge level, and connected load percentage.

6.4 Vol. Automatiktage Peraturan (AVR)

The Njoy Horus Plus features an Automatic Voltage Regulation (AVR) function. In AC mode, if the input voltage fluctuates outside the acceptable range (160-280 VAC), the AVR will automatically adjust the output voltage to a safe level (196-255 VAC) without switching to battery power. This protects connected equipment from voltage sags and surges.

6.5 Operasi Mod Bateri

Semasa kuasa outage or if the input voltage goes beyond the AVR's correction capabilities, the UPS will automatically switch to battery mode. The LCD will indicate battery operation, and an audible alarm will sound (typically beeping every 10 seconds). The UPS will provide power from its internal battery for a limited duration, depending on the connected load.

When the battery capacity is low, the alarm will sound more frequently (e.g., every second). It is recommended to save your work and shut down connected equipment gracefully during this time.

6.6 Fungsi Mula Semula Automatik

Jika kuasa outage occurs and the UPS shuts down due to low battery, it will automatically restart and resume normal operation once AC power is restored and the battery has recharged sufficiently.

6.7 Fungsi Permulaan Sejuk

The UPS can be started directly from battery power even when no AC input is available. To perform a cold start, ensure the UPS is off, then press and hold the power button for approximately 5 seconds. The UPS will turn on and provide battery power to connected devices.

7. Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to clean the exterior of the UPS. Do not use liquid or aerosol cleaners.
• Penjagaan Bateri: To maximize battery life, ensure the UPS is always connected to an AC outlet to keep the battery charged. If the UPS is stored for an extended period, recharge the battery every three months for at least 8 hours.
• Penggantian Bateri: The internal battery is not user-replaceable. Battery replacement should only be performed by qualified service personnel.
• Pengudaraan: Regularly check that the ventilation openings are clear of dust and obstructions to prevent overheating.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information and technical support, please refer to the warranty card included with your product or visit the official NJOY webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

Pengeluar: nJoy

Hubungi: Please refer to the contact information provided on the official NJOY website or your regional distributor for support.