1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Vortex HZ-LE 401 High-Efficiency Heat Pump. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.
2. Arahan Keselamatan
- Keselamatan Elektrik: Ensure the power supply matches the pump's specifications (230V, 50-60Hz). All electrical connections must be performed by a qualified electrician and comply with local regulations. Disconnect power before any installation or maintenance.
- Tekanan Air: The pump is designed for a maximum operating pressure of PN10. Do not exceed this pressure.
- Suhu: The pump is rated for a maximum fluid temperature of 110°C (tf110s1).
- Pemasangan: Install the pump in a dry, well-ventilated area, protected from freezing temperatures and direct sunlight. Ensure proper ventilation around the unit.
- Penyelenggaraan: Only perform maintenance tasks described in this manual. For complex repairs, contact qualified service personnel.
- Perlindungan: The pump has an IP X4 rating, indicating protection against splashing water. However, it should not be submerged.
3. Penerangan Produk dan Komponen
The Vortex HZ-LE 401 is a high-efficiency, electronically regulated heat pump designed for heating systems. It features low energy consumption and robust construction.
Rajah 1: Umum view of the Vortex HZ-LE 401 High-Efficiency Heat Pump. This image shows the compact design of the pump with its integrated control unit.
Rajah 2: Depan view of the Vortex HZ-LE 401 pump. The control panel with "HZ-LE LOW ENERGY VORTEX" branding is clearly visible, indicating its high-efficiency design.
Rajah 3: sebelah view of the Vortex HZ-LE 401 pump. This perspective highlights the robust casing and the connection points for the heating system.
Komponen Utama:
- Perumahan Pam: Durable casing protecting internal components.
- Motor: High-efficiency, electronically regulated motor.
- Unit Kawalan: Integrated electronic control for optimal performance and energy saving.
- Sambungan: Standard DN 25/1 1/2" connections for integration into heating systems.
4. Persediaan dan Pemasangan
- Membongkar: Keluarkan pam dari bungkusannya dengan berhati-hati. Periksa untuk sebarang tanda kerosakan.
- Kedudukan Pemasangan: Mount the pump horizontally or vertically, ensuring the motor shaft is horizontal for optimal bearing lubrication. Refer to the markings on the pump body for correct orientation.
- Sambungan Paip: Connect the pump to the heating system piping using appropriate fittings for DN 25/1 1/2" connections. Ensure all connections are watertight. Avoid applying excessive force to the pump housing.
- Sambungan Elektrik:
- Pastikan bekalan kuasa utama diputuskan.
- Connect the pump to a 230V, 50-60Hz power supply.
- Follow local electrical codes and wiring diagrams provided with the unit (if applicable).
- Pastikan pembumian yang betul.
- Mengisi Sistem: After installation, fill the heating system with water and bleed any air from the system, including the pump.
- Permulaan permulaan: Restore power. The pump will perform a self-test. Observe for any unusual noises or leaks.
5. Arahan Operasi
The Vortex HZ-LE 401 pump is electronically regulated and designed for automatic operation. Once installed and powered, it will typically adjust its performance based on system requirements to maintain optimal efficiency.
Control Panel (Refer to Figure 2):
- paparan: Shows current operating status, power consumption, or error codes.
- Butang: Used to cycle through operating modes or adjust settings (specific functions may vary by model variant; consult detailed product documentation for advanced settings).
- Penunjuk LED: Provide visual feedback on pump status (e.g., power on, error, operating mode).
For specific operating modes and advanced settings, please refer to the detailed technical documentation provided with your pump or available on the manufacturer's webtapak.
6. Penyelenggaraan
The Vortex HZ-LE 401 is designed for minimal maintenance. However, periodic checks are recommended to ensure long-term reliability.
- Pemeriksaan Tahunan: Visually inspect the pump and connections for any signs of leaks, corrosion, or damage.
- Kualiti Air Sistem: Ensure the heating system water quality is maintained according to manufacturer recommendations to prevent scale buildup and corrosion.
- Pembersihan: Keep the exterior of the pump clean and free from dust and debris to ensure proper heat dissipation. Do not use abrasive cleaners.
- Pendarahan Udara: Periodically check and bleed air from the heating system to prevent cavitation and ensure efficient operation.
Penting: Always disconnect the power supply before performing any maintenance or cleaning tasks.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pam tidak berjalan | No power supply; Air in pump; Motor jammed | Check power connection and circuit breaker; Bleed air from the system; Contact service if motor is jammed. |
| Insufficient flow/heating | Air in system; Incorrect operating mode; Blockage in piping | Bleed air from the system; Check pump settings; Inspect piping for obstructions. |
| Bunyi/getaran luar biasa | Air in pump; Loose mounting; Foreign object in pump | Bleed air from the pump; Check mounting bolts; Disconnect power and inspect impeller (if accessible and safe). |
| Kebocoran | Sambungan longgar; Pengedap rosak | Tighten pipe connections; Contact service for seal replacement. |
Jika masalah berterusan selepas mencuba penyelesaian ini, sila hubungi kakitangan servis yang berkelayakan.
8. Spesifikasi
| Parameter | Nilai |
|---|---|
| Model | HZ-LE 401 |
| Jenama | Pusaran |
| Voltage | 230 V |
| Kekerapan | 50 – 60 Hz |
| Penggunaan Kuasa | 4 – 23 W |
| Indeks Kecekapan Tenaga (EEI) | <0.19 (part 2) |
| Peringkat Perlindungan Ingress (IP). | IP X4 |
| Nominal Pressure (PN) | PN10 |
| Suhu Bendalir Maksimum | 110°C (tf110s1) |
| Saiz Sambungan | DN 25/1 1/2" |
| ASIN | B01LZUSZV2 |
9. Waranti dan Sokongan
Specific warranty information for the Vortex HZ-LE 401 High-Efficiency Heat Pump is not provided in this document. Please refer to the warranty card included with your product or contact your retailer or the manufacturer directly for details regarding warranty coverage and terms.
For technical support, spare parts, or service inquiries, please contact Vortex customer service or an authorized service partner. Contact information can typically be found on the manufacturer's official webtapak atau pada pembungkusan produk.
