Sena Tufftalk Hard Hat Mount Earmuff User Manual

pengenalan

The Sena Tufftalk Hard Hat Mount Earmuff is designed for clear, long-range Bluetooth communication in noisy environments. It integrates advanced noise control and hearing protection with wireless communication capabilities, allowing users to maintain situational awareness while communicating effectively. This manual provides instructions for setup, operation, and maintenance of your Tufftalk device.

Kandungan Pakej

Sebelum meneruskan, pastikan semua komponen ada:

• Tufftalk Hard Hat Mount Earmuff with Long-Range Bluetooth Communication
• Pengecas Bateri Dwi
• Rechargeable Battery 1100 (2 included)
• Kuasa USB & Kabel Data (jenis USB Mikro)
• Microphone Sponges (5pcs)
• Tufftalk Replacement Ear Pads Kit (2 included)
• Penutup Bateri Tufftalk
• Tufftalk Antennas
• Tufftalk Hard Hat Mount Bracket

Persediaan

1. Pengecasan Awal

Before first use, fully charge the Tufftalk battery. Connect the USB Power & Data Cable to the Dual Battery Charger, then plug the charger into a power source. Insert the rechargeable battery into the charger. A full charge takes approximately 2.5 hours. The battery can also be charged while installed in the earmuff.

2. Hard Hat Mounting

Attach the Tufftalk earmuff to a compatible hard hat using the provided Tufftalk Hard Hat Mount Bracket. Ensure the earmuff is securely fastened and positioned for comfortable use and optimal hearing protection.

Image: Sena Tufftalk Hard Hat Mount Earmuff. This image displays the black earmuff unit with its hard hat mounting brackets and attached microphone boom.

3. Pemasangan Antena

Install the appropriate antenna for your communication needs. The default antenna provides a range of 800 meters, while an optional long antenna can extend the range up to 1.4 kilometers.

4. Menghidupkan/Mematikan

• Untuk Menghidupkan: Press and hold the Power Button until the LED indicator illuminates.
• Untuk Mematikan: Press and hold the Power Button until the LED indicator turns off.

Arahan Operasi

1. Berpasangan Bluetooth

To pair the Tufftalk with a Bluetooth-enabled device (e.g., smartphone, other Tufftalk units):

1. Ensure the Tufftalk is powered off.
2. Press and hold the Phone Button and the (+) Button simultaneously for 5 seconds until the LED flashes red and blue, indicating pairing mode.
3. On your Bluetooth device, search for "Sena Tufftalk" and select it to pair.
4. Setelah dipasangkan, LED akan berkelip biru.

2. Komunikasi Interkom

The Tufftalk supports four-way intercom communication. For optimal performance, ensure all units are within range and properly paired.

• Memulakan Interkom: Briefly press the Intercom Button on your unit.
• Interkom tamat: Tekan Butang Interkom sekali lagi secara ringkas.
• Interkom Universal: The Tufftalk can connect with non-Sena Bluetooth headsets using Universal Intercom mode. Refer to the full user guide on the Sena webtapak untuk arahan terperinci.

3. Mod Ambien

The Ambient Mode feature allows you to hear important external sounds while still benefiting from hearing protection. This increases situational awareness.

• Activating Ambient Mode: Press the Ambient Mode Button.
• Deactivating Ambient Mode: Press the Ambient Mode Button again.

4. Advanced Noise Control

Sena's Advanced Noise Control technology filters out external noise, ensuring clear audio for both incoming and outgoing communication. This feature operates automatically.

5. Two-Way Radio Connection

The Tufftalk can be connected to a two-way radio for additional communication options. Specific connection methods may vary depending on the radio model. Consult the full user guide for detailed instructions.

Penyelenggaraan

• Pembersihan: Wipe the earmuff and microphone with a soft, damp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar.
• Penggantian Pad Telinga: The Tufftalk Replacement Ear Pads Kit is included for periodic replacement to maintain comfort and acoustic seal. Follow the instructions provided with the kit for proper installation.
• Microphone Sponges: Replace microphone sponges as needed to ensure clear voice transmission and hygiene.
• Penjagaan Bateri: Store the device in a cool, dry place. If storing for extended periods, charge the battery every few months to prevent deep discharge.

Menyelesaikan masalah

• Tiada Kuasa: Ensure the battery is fully charged and correctly inserted. Try charging the unit for at least 30 minutes.
• Tiada Kualiti Audio/Kualiti Audio Lemah:
  • Check volume levels on both the Tufftalk and the connected device.
  • Ensure the microphone is properly positioned and the sponge is intact.
  • Verify Bluetooth connection. If necessary, re-pair the devices.
  • Confirm Advanced Noise Control is functioning.
• Pemotongan Interkom:
  • Pastikan unit berada dalam julat interkom yang ditentukan.
  • Re-establish the intercom connection by pressing the Intercom Button.
  • Check for obstructions or strong interference sources.
• Isu Berpasangan Bluetooth:
  • Ensure the Tufftalk is in pairing mode (LED flashing red and blue).
  • Delete previous pairings from your device's Bluetooth list and attempt to pair again.
  • Restart both the Tufftalk and the Bluetooth device.

Spesifikasi

Sokongan

For further assistance, detailed user manuals, firmware updates, and warranty information, please visit the official Sena webtapak:

www.sena.com

Please note that specific warranty terms and conditions may apply and are available on the manufacturer's webtapak.