Mount-It! MI-7940 Rolling Standing Desk Instruction Manual

pengenalan

The Mount-It! MI-7940 Rolling Standing Desk provides a flexible and mobile workspace solution. Designed for various environments such as offices, classrooms, and home study areas, this desk allows for effortless transitions between sitting and standing positions, promoting improved posture and reduced fatigue. Its multi-platform design offers ample space for essential equipment and supplies.

Figure 1: Mount-It! MI-7940 Rolling Standing Desk

Maklumat Keselamatan

• This product has a maximum total weight capacity of 132 paun, with each individual shelf supporting up to 33 paun. Do not exceed these limits to prevent damage or injury.
• Ensure the desk is stable before use, especially when adjusting height or moving it.
• Always engage the locking casters to secure the desk in place when stationary.
• Exercise caution to avoid pinching fingers or other body parts during height adjustments.
• Do not attempt to move the desk with heavy items on it, as this may compromise stability and cause damage.

Arahan Perhimpunan

Follow these steps carefully to assemble your Mount-It! MI-7940 Rolling Standing Desk. An assembly video is provided for visual guidance.

1. Attach Casters to the Base: Turn the base frame upside down. Attach the locking casters to the front end of the base (the side with the wider gap for feet when standing). Attach the regular casters to the rear. Use the provided wrench to tighten the nuts closest to the wheel to secure them. The other nut is for height adjustment.
2. Install Vertical Support Bars: Insert the vertical support bars into the base. Ensure the arms with the adjustment knobs are facing inwards, towards the center of the desk. Secure them from the bottom using the provided screws.
3. Attach Crossbar: Connect the crossbar between the two vertical support bars. This piece forms the base for the lower shelves. Secure it with screws.
4. Pasang Rak Bawah: Place the bottom shelf onto the designated supports on the base. This shelf has screw openings closer to the edge of the wood, aligning with the long leg part on the bottom. Secure with screws.
5. Pasang Rak Tengah: Position the middle shelf onto the supports above the crossbar. This shelf is designed to fit in one orientation. Secure with screws.
6. Pasang Rak Atas: Place the top shelf onto the upper supports. This shelf also has specific cut-out holes to sit flat over the screws used for the upper arms. Secure with screws.

Figure 2: Product Features Diagram

Arahan Operasi

Pelarasan Ketinggian

The top shelves of the MI-7940 desk are adjustable through 11 locking intervals, allowing you to switch between sitting and standing positions. The height can be adjusted from 37.25 inci hingga 54.7 inci.

1. Untuk meningkatkan: Loosen the adjustment knobs on both vertical support bars. With hands on both sides of the top platform, lift the platform upwards. You will hear a click at each locking interval. Once the desired height is reached, tighten both adjustment knobs securely.
2. Untuk menurunkan: Loosen the adjustment knobs on both vertical support bars. Lift the platform all the way up until it reaches the maximum height (indicated by a 'MAX' line). Lift it slightly further (about an inch) until the internal locks release. Slowly guide the platform downwards to your desired height. Once the desired height is reached, tighten both adjustment knobs securely.

Rajah 3: Julat Pelarasan Ketinggian

mobiliti

The desk is equipped with 1.5-inch smooth-rolling casters for easy movement across various surfaces. Two of these casters include brakes for securing the desk in a stationary position.

• Untuk bergerak: Ensure the two locking casters (located at the front of the base) are disengaged. Gently push or pull the desk to its desired location.
• Untuk Selamatkan: Once the desk is in position, press down on the levers of the two locking casters until they click into place. This will prevent the desk from rolling.

Figure 4: Caster Wheels with Locking Mechanism

Penyelenggaraan

• Pembersihan: Lap permukaan dengan lembut, damp kain. Elakkan bahan kimia keras yang boleh merosakkan kemasan.
• Pengikat: Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu untuk mengekalkan kestabilan.
• Kastor: Pastikan roda bebas daripada serpihan untuk memastikan penggelekkan yang lancar.

Menyelesaikan masalah

• Desk is unstable/wobbly: Ensure all assembly screws are securely tightened. Verify that the adjustment knobs for height are fully tightened after setting the desired height. Adjust the leveling nuts on the casters if the floor is uneven.
• Kesukaran melaraskan ketinggian: Ensure both adjustment knobs are sufficiently loosened before attempting to raise or lower the platform. If lowering, remember to lift the platform to its maximum height first to release the internal locks.
• Kastor tidak bergolek dengan lancar: Check for any hair or debris caught in the caster wheels. Clean as necessary. Ensure locking casters are disengaged.

Spesifikasi

Rajah 5: Dimensi Meja

Figure 6: Weight Capacity

Waranti dan Sokongan

The Mount-It! MI-7940 Rolling Standing Desk is covered by Mount-It!'s waranti seumur hidup, ensuring lasting confidence in your purchase.

For any technical assistance, questions, or support before, during, or after setup, our expert US-based technical team is ready to assist you. Please refer to the contact information provided with your product packaging or visit the official Mount-It! webtapak untuk butiran sokongan.