1. Pengenalan
The Xilence Performance C CPU Cooler XC032 is engineered to provide efficient and quiet cooling for high-performance Intel CPUs. Featuring a 92mm PWM fan with fluid bearing, it ensures optimal airflow while maintaining low noise levels. This cooler is designed for compatibility with various Intel sockets and includes a stable mounting backplate for secure installation.
2. Maklumat Keselamatan
- Sentiasa putuskan kuasa dari komputer anda sebelum memasang atau menjalankan penyelenggaraan pada mana-mana komponen dalaman.
- Handle the CPU cooler and other components with care to avoid damage to sensitive parts.
- Ensure proper grounding to prevent electrostatic discharge (ESD) which can damage electronic components.
- Jauhkan daripada kanak-kanak.
- Do not obstruct the fan's airflow during operation.
- Refer to your motherboard's manual for specific CPU cooler installation guidelines.
3. Kandungan Pakej
Sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:
- I250PWM Intel CPU Cooler
- 92 mm PWM Fan (integrated)
- Skru Kipas
- Pes Termal (yang telah disapu terlebih dahulu atau dalam tiub)
- Plat belakang
Figure 3.1: All components included in the Xilence Performance C CPU Cooler XC032 package.
4. Persediaan dan Pemasangan
Follow these general steps for installing your Xilence Performance C CPU Cooler. Specific steps may vary slightly depending on your motherboard and PC case.
- Sediakan Papan Induk: Place the motherboard on a non-conductive surface. If a CPU is already installed, ensure it is properly seated in the socket.
- Pasang Backplate: Position the included backplate on the rear side of the motherboard, aligning its holes with the CPU cooler mounting holes around the CPU socket. This cooler is compatible with Intel sockets 1150, 1151, 1155, and 1156.
Figure 4.1: CPU Cooler with separate backplate.
- Sapukan Pes Termal (jika belum disapu terlebih dahulu): If your cooler does not have thermal paste pre-applied to its base, apply a small amount (pea-sized dot) to the center of the CPU's integrated heat spreader (IHS).
- Mount the Cooler: Carefully place the CPU cooler onto the CPU, aligning the mounting screws with the holes in the backplate. Press down gently and evenly.
- Selamatkan Penyejuk: Tighten the four spring-loaded screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until they are finger-tight. Do not overtighten. The spring mechanism ensures even pressure.
Rajah 4.2: Bersudut view of the cooler showing the fan and heatsink.
- Connect the Fan Cable: Locate the 4-pin PWM fan header on your motherboard (usually labeled "CPU_FAN") and connect the cooler's 4-pin cable to it. Ensure the connector is fully seated.
- Semakan Akhir: Double-check all connections and ensure the cooler is securely mounted and not obstructing any other components.
5. Arahan Operasi
The Xilence Performance C CPU Cooler XC032 operates automatically via its PWM (Pulse Width Modulation) control. The motherboard's BIOS/UEFI or operating system software will regulate the fan speed based on the CPU temperature, ensuring optimal cooling performance and noise levels.
- Kawalan Kipas Automatik: The 4-pin PWM connection allows the motherboard to dynamically adjust the fan speed (RPM) according to the CPU's thermal load. This results in quieter operation during low-load tasks and increased cooling power when needed.
- Pemantauan: You can monitor CPU temperatures and fan speeds using motherboard monitoring software or utilities provided by your operating system.
- Tahap Bunyi: The fan is designed for quiet operation, with a typical noise level of 26.4 dB.
Rajah 5.1: Atas view of the CPU cooler fan.
6. Penyelenggaraan
Penyelenggaraan tetap membantu memastikan jangka hayat dan prestasi optimum penyejuk CPU anda.
- Penyingkiran habuk: Periodically (e.g., every 3-6 months), use compressed air to gently blow dust out of the heatsink fins and fan blades. Ensure the fan is not spinning rapidly during this process to prevent damage to the bearings.
- Pembersihan Kipas: If dust accumulates on the fan blades, carefully wipe them with a soft, dry cloth.
- Tampal Terma: The thermal paste typically lasts for several years. If you notice significantly higher CPU temperatures over time, consider reapplying fresh thermal paste after carefully cleaning the old paste from both the CPU and cooler base.
- Pemeriksaan: Regularly inspect the mounting screws to ensure they remain secure.
7. Penyelesaian masalah
If you encounter issues with your CPU cooler, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kipas tidak berputar | Fan cable disconnected; Faulty fan header; Fan failure | Check fan cable connection to motherboard; Try a different fan header; Replace cooler if fan is faulty. |
| Suhu CPU yang tinggi | Improper cooler mounting; Insufficient thermal paste; Dust accumulation; Poor case airflow | Re-seat cooler, ensuring even pressure; Reapply thermal paste; Clean heatsink and fan; Improve case ventilation. |
| Excessive fan noise | Dust in fan bearings; Fan hitting cables; High fan speed due to high CPU load | Clean fan; Ensure no cables are obstructing fan blades; Check CPU load and temperatures; Adjust fan curve in BIOS/UEFI if desired. |
8. Spesifikasi
Key technical specifications for the Xilence Performance C CPU Cooler XC032:
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | XC032 |
| Dimensi Produk | 3.94 x 3.94 x 3.15 inci (10 x 10 x 8 cm) |
| Berat badan | 11.46 auns (325 gram) |
| Soket yang Serasi | Intel LGA 1150, 1151, 1155, 1156 |
| Peranti Serasi | Core i7/i5/i3, Pentium G9650 |
| Kaedah Penyejukan | Udara |
| Diameter Kipas | 92 mm |
| Penyambung Kipas | 4-Pin PWM |
| Kelajuan Putaran Maksimum | 2500 RPM |
| Kapasiti Aliran Udara | 44.25 CFM (75.2 M³/H) |
| Tahap Kebisingan | 26.4 dB |
| TDP (Thermal Design Power) | Sehingga 95 Watt |
| Voltage | 12 Volt |
| bahan | aluminium |
9. Waranti dan Sokongan
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Xilence products typically come with a manufacturer's warranty covering defects in materials and workmanship.
- Pengeluar Webtapak: Visit the official Xilence website for the most up-to-date support resources, FAQs, and contact information.
- Bukti Pembelian: Retain your proof of purchase (receipt or invoice) as it may be required for warranty claims.
