Manual Pengguna Termostat Digital PEREL CTH406

1. Pengenalan

This manual provides comprehensive instructions for the installation, programming, and operation of your PEREL CTH406 Digital Thermostat. Designed for precise temperature control, this thermostat offers programmable settings to optimize comfort and energy efficiency in your home or office. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Produk Lebihview

2.1 Ciri-ciri Utama

• Programmable for up to 24 time zones per day.
• Three distinct temperature levels: Comfort, Energy Saving, and Holiday (Frost Protection).
• Manual override function for temporary temperature adjustments.
• Manual On/Off switch for direct control.
• Clear LCD display for easy reading of time and temperature.

2.2 Thermostat Components

The PEREL CTH406 Digital Thermostat consists of a main unit with a digital display and control buttons. The front panel provides access to programming and operational settings, while the rear panel is designed for wall mounting and electrical connections.

Rajah 1: Depan View of PEREL CTH406 Digital Thermostat. This image shows the front of the white digital thermostat, featuring a large LCD screen displaying time, current temperature, and various mode indicators. Below the screen are several control buttons for programming and mode selection.

Rajah 2: Belakang View of PEREL CTH406 Digital Thermostat. This image displays the rear of the thermostat, highlighting the mounting holes and the compartment for electrical wiring connections. This view is essential for installation purposes.

3. Spesifikasi

4. Persediaan

4.1 Pemasangan Bateri

1. Carefully open the battery compartment located on the back or side of the thermostat.
2. Masukkan 2 bateri AA, pastikan kekutuban (+/-) betul.
3. Close the battery compartment securely. The display should illuminate, indicating power.

4.2 Pemasangan dan Pendawaian

The PEREL CTH406 thermostat is designed for wall mounting. Due to its 230V operating voltage, installation must be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Incorrect wiring can lead to electric shock, fire, or damage to the thermostat and heating system.

• Choose a suitable location on an interior wall, away from direct sunlight, drafts, or heat sources.
• Mark the drilling points using the thermostat's base plate as a template.
• Tebuk lubang dan masukkan palam dinding jika perlu.
• Connect the electrical wiring to the designated terminals on the thermostat's back plate as per the wiring diagram (typically found on the back of the unit or in a separate wiring guide).
• Secure the thermostat to the wall using screws.

5. Arahan Operasi

The thermostat features an intuitive interface for setting time, programming schedules, and selecting operating modes.

Figure 3: Operational View of PEREL CTH406 Digital Thermostat. This image shows the thermostat from an angled perspective, with the LCD screen clearly displaying the current time (10:27), day (MON), and temperature (25.6°C). Various icons indicating operational status are also visible.

5.1 Menetapkan Masa dan Hari

Refer to the specific buttons on your thermostat (often labeled 'SET' or with a clock icon) to enter time/day setting mode. Use the arrow buttons to adjust values and confirm with the 'OK' or 'SET' button.

5.2 Mod Pengendalian

The CTH406 offers three primary temperature modes:

• Mod Keselesaan: Maintains your preferred comfortable temperature during occupied periods.
• Mod Penjimatan Tenaga: Sets a lower temperature to conserve energy during unoccupied periods or at night.
• Holiday (Frost Protection) Mode: Maintains a minimum temperature to prevent freezing pipes when the property is vacant for an extended period.

Use the mode selection button (often indicated by icons like sun, moon, or a suitcase) to cycle through these modes.

5.3 Jadual Pengaturcaraan

The thermostat allows for detailed programming with up to 24 time zones per day. This enables you to set different temperature levels for specific hours throughout the day and week.

1. Press the 'PROG' or 'P' button to enter programming mode.
2. Select the day or group of days you wish to program (e.g., Mon-Fri, Sat-Sun, or individual days).
3. For each hour or time block, select the desired temperature level (Comfort, Energy Saving, or Holiday).
4. Repeat for all desired time zones and days.
5. Save and exit programming mode (often by pressing 'PROG' again or 'ESC').

Note: Specific button labels and navigation may vary. Refer to the on-screen prompts or quick-start guide included with your product for precise steps.

5.4 Manual Override Function

The manual override function allows you to temporarily adjust the temperature without altering the programmed schedule. This is useful for unexpected changes in occupancy or comfort needs.

• While in normal operating mode, use the up/down arrow buttons to set a new desired temperature.
• The thermostat will maintain this temperature until the next programmed event or until the override is manually canceled.

5.5 Manual On/Off Switch

A physical On/Off switch provides a direct way to power the thermostat on or off, which can be useful during extended absences or for system maintenance.

6. Penyelenggaraan

6.1 Penggantian Bateri

When the battery low indicator appears on the display, replace the 2 AA batteries promptly to ensure continuous operation. Follow the steps outlined in Section 4.1 for battery installation.

6.2 Pembersihan

To clean the thermostat, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit, as this may damage the display or internal components.

7. Penyelesaian masalah

If problems persist after attempting these solutions, please contact customer support or a qualified technician.

8. Maklumat Keselamatan

• Bahaya Elektrik: Installation and wiring must be performed by a qualified electrician. Disconnect power at the circuit breaker before working on wiring.
• Jangan dedahkan termostat kepada air atau kelembapan berlebihan.
• Jangan cuba membuka atau membaiki termostat sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Jauhkan bateri daripada capaian kanak-kanak. Buang bateri terpakai mengikut peraturan tempatan.
• Ensure the thermostat is securely mounted to prevent it from falling.

9. Waranti dan Sokongan

Specific warranty information for the PEREL CTH406 Digital Thermostat is not provided in this document. Please refer to the product packaging or the manufacturer's official webtapak untuk butiran mengenai perlindungan waranti dan terma.

For technical support or further assistance, please contact Perel customer service through their official channels. Contact information can typically be found on the Perel webtapak atau dokumentasi produk.