Manual Arahan Pencetak Brady M61-R6010 R6000 Reben Resin untuk Siri BMP61

Produk Selesaiview

The Brady M61-R6010 R6000 Resin Ribbon is designed for use with Brady BMP61 Series printers. This ribbon cartridge facilitates quick and easy ribbon changes, ensuring efficient operation. It provides durable, high-quality black resin prints suitable for various industrial labeling applications.

This image displays the Brady M61-R6010 R6000 Resin Ribbon cartridge. The cartridge features a yellow outer casing with a clear top, revealing two spools of black resin ribbon. One spool is full, and the other is an empty take-up spool, with the ribbon material stretched between them, ready for installation into a compatible Brady BMP61 Series printer.

Persediaan dan Pemasangan

Follow these steps to properly install the M61-R6010 ribbon cartridge into your Brady BMP61 Series printer:

1. Matikan Pencetak: Ensure your Brady BMP61 Series printer is turned off before beginning the installation process.
2. Buka Penutup Pencetak: Locate and open the ribbon compartment cover on your printer. Refer to your printer's specific manual for exact instructions on opening the cover.
3. Remove Old Ribbon (if applicable): If an old ribbon cartridge is present, carefully remove it by lifting it out of its slot.
4. Insert New Ribbon: Take the new M61-R6010 ribbon cartridge. Hold it by its yellow casing and align it with the ribbon compartment. The cartridge is designed to fit in only one orientation. Gently push the cartridge down until it clicks securely into place.
5. Tutup Penutup Pencetak: Close the ribbon compartment cover firmly until it latches.
6. Hidupkan Pencetak: Turn on your Brady BMP61 Series printer. The printer should automatically detect the new ribbon.

The ribbon is now ready for use with your printer and compatible label materials.

Arahan Operasi

Once the M61-R6010 ribbon cartridge is installed, the printer is ready to produce labels. The ribbon works in conjunction with compatible label materials to create durable prints.

• Memuatkan Bahan: Ensure you have loaded the correct label material into your BMP61 Series printer according to its instructions.
• Tetapan Pencetak: Select the appropriate label material and print settings on your printer or connected software. For R6000 Resin ribbons, ensure settings are optimized for resin thermal transfer printing to achieve the best print quality and durability.
• Mencetak: Proceed with your printing task as usual. The printer will automatically feed the ribbon and label material to create your desired labels.

For detailed printing operations, refer to the instruction manual for your specific Brady BMP61 Series printer model.

Penyelenggaraan dan Penyimpanan

Proper maintenance and storage will extend the life and performance of your M61-R6010 ribbon cartridges.

• Storan: Simpan kartrij reben yang tidak digunakan dalam pembungkusan asalnya di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung dan suhu yang melampau.
• Pengendalian: Avoid touching the ribbon surface directly, as oils from skin can affect print quality.
• Pembersihan Pencetak: Regularly clean your printer's printhead and platen roller as recommended in your printer's manual. A clean printhead ensures optimal ribbon transfer and print quality.
• Pelupusan: Dispose of used ribbon cartridges according to local regulations.

Menyelesaikan masalah

If you encounter issues while using the M61-R6010 ribbon, consider the following common troubleshooting steps:

• Kualiti Cetakan Lemah:
  • Ensure the ribbon is installed correctly and fully seated.
  • Check if the printhead is clean. Clean it if necessary.
  • Verify that the printer settings (heat, speed) are appropriate for R6000 Resin ribbon and the label material being used.
  • Confirm the ribbon is not creased or damaged.
• Ribbon Not Feeding:
  • Check for any obstructions in the ribbon path.
  • Ensure the ribbon cartridge is properly loaded and latched.
  • Verify that the printer's rollers are clean and functioning correctly.
• Printer Not Detecting Ribbon:
  • Remove and re-insert the ribbon cartridge to ensure it is seated correctly.
  • Mulakan semula pencetak.
  • Ensure you are using a genuine Brady ribbon cartridge compatible with your BMP61 Series printer.

For persistent issues, consult your Brady BMP61 Series printer's user manual or contact Brady technical support.

Spesifikasi

Waranti dan Sokongan

Information regarding the specific warranty for the Brady M61-R6010 R6000 Resin Ribbon is not available in the provided product data. Please refer to the official Brady website or contact Brady customer service for detailed warranty terms and support options.

Untuk bantuan teknikal atau pertanyaan lanjut, sila layari Brady Store on Amazon or the official Brady Worldwide webtapak.