pengenalan
The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.
Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum menggunakan peranti.
- Simpan manual ini untuk rujukan masa hadapan.
- Jangan dedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
- Elakkan daripada menjatuhkan atau meletakkan peranti kepada kesan yang kuat.
- Jangan cuba membuka atau membaiki peranti sendiri. Hubungi kakitangan perkhidmatan yang berkelayakan.
- Buang bateri terpakai secara bertanggungjawab mengikut peraturan tempatan.
Kandungan Pakej
- 1x BRESSER Temeo Quadro Main Display Unit
- 3x Remote Sensors
- 1x Manual Pengguna (dokumen ini)
Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.
Produk Selesaiview
Unit Paparan Utama
Imej: Depan view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.
Imej: belakang view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.
- Paparan LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
- CHANNEL Button: Selects which remote sensor's data is displayed or cycles through channels.
- Butang PENGGERA: Activates/deactivates temperature/humidity alarms.
- Butang MAX/MIN: Memaparkan nilai maksimum dan minimum yang direkodkan.
- Butang SET: Enters setup mode for time, date, and alarm settings.
- Petak Bateri: Located on the rear, for 3x AAA batteries.
- Stand Bersepadu: For desktop placement.
Penderia Jauh
Imej: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.
- Paparan LCD: Shows its current temperature and humidity.
- Suis Saluran: Allows selection of channel 1, 2, or 3.
- Petak Bateri: For 2x AAA batteries.
- Lubang Pemasangan: Untuk pemasangan dinding.
Persediaan
1. Pemasangan Bateri
- For Remote Sensors:
- Open the battery compartment cover on the back of each remote sensor.
- Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
- Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
- Tutup penutup petak bateri.
- For Main Display Unit:
- Buka penutup petak bateri di belakang unit utama.
- Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
- Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.
2. Berpasangan Sensor
- After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
- Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
- The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
- If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.
3. penempatan
- Place the main unit indoors in a central location, away from direct sunlight or heat sources.
- Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.
Arahan Operasi
Viewdalam Suhu dan Kelembapan
- The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
- The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.
Rekod MAKSIMUM/MINIT
- Tekan ke MAX/MIN button once to display the maximum temperature and humidity recorded since the last reset.
- Tekan ke MAX/MIN button a second time to display the minimum temperature and humidity recorded.
- Untuk memadam rekod MAX/MIN, tekan dan tahan MAX/MIN butang selama lebih kurang 3 saat sementara nilai MAX atau MIN dipaparkan.
Pemilihan Unit Suhu (°C/°F)
- Pada unit utama, tekan butang SET butang untuk bertukar antara Celsius (°C) dan Fahrenheit (°F).
Setting Alarms (if applicable)
- Tekan ke PENGGERA butang untuk memasuki mod tetapan penggera.
- Gunakan SALURAN dan MAX/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
- Tekan PENGGERA again to confirm settings and activate the alarm. An alarm icon will appear on the display.
- When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.
Penyelenggaraan
- Pembersihan: Lap peranti dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
- Penggantian Bateri: Gantikan bateri apabila penunjuk bateri rendah muncul pada paparan. Sentiasa gantikan semua bateri dalam satu unit pada masa yang sama.
- Storan: Jika menyimpan peranti untuk tempoh yang lama, keluarkan semua bateri untuk mengelakkan kebocoran.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada paparan pada unit utama. | Bateri mati atau tidak dimasukkan dengan betul. | Periksa kekutuban bateri dan gantikan dengan bateri AAA baru. |
| Remote sensor not displaying data on main unit. | Sensor out of range, incorrect channel setting, or dead batteries. |
|
| Bacaan yang tidak tepat. | Sensor yang terdedah kepada cahaya matahari langsung, sumber haba atau kelembapan. | Relocate sensors to a more appropriate, sheltered environment. Allow time for readings to stabilize. |
| Kehilangan isyarat sekejap-sekejap. | Interference from other electronic devices or physical obstructions. | Move the main unit or sensors away from potential sources of interference (e.g., TVs, microwaves, large metal objects). |
Spesifikasi
| Nombor Model | 7000020CM3000 |
| Jenama | BRESSER |
| Dimensi Produk (Unit Utama) | 1.02 x 4.13 x 4.72 inci (2.59 x 10.49 x 11.99 cm) |
| Item Weight (Main Unit) | 0.19 Kilogram (lebih kurang 6.7 auns) |
| Temperature Range (Main Unit) | Internal sensor range not specified, but upper rating is 55 °C. |
| Ketepatan Suhu | ±1 °C |
| Julat Kelembapan | Not specified, but typically 20% to 95% for similar devices. |
| Kekerapan Wayarles | 433 MHz |
| Sumber Kuasa (Unit Utama) | 3x AAA (LR03) batteries |
| Sumber Kuasa (Sensor Alat Kawalan Jauh) | 2x AAA (LR03) batteries per sensor |
| Number of Remote Sensors Supported | 3 |
Waranti
This BRESSER product comes with a waranti dua tahun against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.
Sokongan
For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER webtapak untuk butiran hubungan terkini.
Online resources may include FAQs, additional manuals, and contact forms.
