1. Produk Lebihview
The LinkPower™ Pole Mount Kit MMK0001-S is designed to facilitate the secure installation of LinkPower™ Outdoor PoE Switch models, including LPS840AF-T1, LPS940-T1, and LPS2400-T1, onto poles or masts. This kit provides a robust and durable mounting solution for outdoor networking equipment.
It is manufactured with high-quality stainless steel components to ensure longevity and resistance to environmental elements.
2. Kandungan Kit
The MMK0001-S Pole Mount Kit includes all necessary hardware for installation:
- Two (2) Stainless Steel Mounting Brackets
- Four (4) Stainless Steel Bolts
- Four (4) Stainless Steel Lock Nuts
- Two (2) Quick Release All Stainless Worm Gear Hose Clamps (3-1/16" - 4" diameter range)
Figure 2.1: All components included in the MMK0001-S Pole Mount Kit. This image displays the two flat mounting plates with pre-drilled holes and slots, along with two adjustable stainless steel hose clamps.
3. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | MMK0001-S |
| bahan | Semua Keluli Tahan Karat |
| Dimensi Produk (L x W x H) | 10 x 0.08 x 1.5 inci (254 x 2 x 38.1 mm) |
| Berat Produk | 1 Paun (0.45 kg) |
| Selang Clamp Julat Diameter | 3-1/16" - 4" (77.7mm - 101.6mm) |
| Compatible Pole/Mast Diameter | 1-3/4" hingga 8-9/16" (44.45mm hingga 217.48mm) |
| Compatible Square Pole Size | Sehingga 5" (127mm) |
| Penilaian Perlindungan Antarabangsa | IP54 (Dilindungi habuk, tahan percikan) |
Figure 3.1: Technical drawing showing the dimensions of the mounting brackets and details of the worm gear hose clamps. This diagram illustrates the physical measurements and features of the kit components.
Figure 3.2: Close-up of the Quick Release All Stainless Worm Gear Hose Clamp. This image shows the Series 300 stainless steel band, the stainless steel screw, and the quick-release swivel feature for easy engagement and disengagement.
4. Persediaan dan Pemasangan
This section provides instructions for mounting the LinkPower™ Outdoor PoE Switch using the MMK0001-S Pole Mount Kit.
4.1. Alatan Diperlukan
- Adjustable Wrench or Socket Set (for bolts and nuts)
- Screwdriver (for hose clamps)
- Pita Pengukur
- Penanda atau Pensel
4.2. Langkah Pemasangan
- Prepare the Pole/Mast: Ensure the mounting surface on the pole or mast is clean and free from obstructions. The pole should have a diameter between 1-3/4" and 8-9/16" (or up to 5" for square poles).
- Attach Mounting Brackets to PoE Switch: Align the two stainless steel mounting brackets with the designated mounting points on the back of your LinkPower™ Outdoor PoE Switch. Secure the brackets to the switch using the provided stainless steel bolts and lock nuts. Ensure they are tightened securely but do not overtighten.
- Position the Switch on the Pole: Carefully position the PoE switch (with attached brackets) against the pole at the desired mounting height.
- Secure with Hose Clamps: Thread one of the quick-release worm gear hose clamps through the slots on the mounting brackets and around the pole. Engage the quick-release mechanism and tighten the clamp using a screwdriver until the switch is firmly secured to the pole. Repeat this step for the second hose clamp, ensuring both clamps are evenly tightened for stability.
- Sahkan Kestabilan: After tightening both clamps, gently attempt to move the mounted switch to ensure it is stable and securely fastened to the pole.
Nota: For optimal stability and safety, ensure all fasteners are properly tightened. Periodically check the tightness of the clamps, especially after initial installation and exposure to environmental changes.
5. Penyelenggaraan
The MMK0001-S Pole Mount Kit is constructed from durable stainless steel and requires minimal maintenance. However, periodic inspection is recommended to ensure continued performance and safety.
- Pemeriksaan Visual: Annually inspect the mounting brackets and hose clamps for any signs of corrosion, damage, or loosening.
- Pemeriksaan kekejangan: Verify that the hose clamps and all bolts/nuts remain securely tightened. Re-tighten if any looseness is detected.
- Pembersihan: If necessary, clean the components with a damp kain untuk menghilangkan kotoran atau serpihan. Elakkan pembersih yang kasar.
6. Penyelesaian masalah
This section addresses common issues that may arise during the installation or use of the pole mount kit.
6.1. Isu dan Penyelesaian Biasa
- Isu: The mounted device feels loose or unstable.
Penyelesaian: Ensure both hose clamps are properly tightened. Check that the bolts and nuts securing the brackets to the PoE switch are also secure. Verify that the pole diameter is within the specified range for the clamps. - Isu: Difficulty tightening the hose clamps.
Penyelesaian: Ensure the quick-release mechanism is fully engaged. Use an appropriate screwdriver to turn the worm gear screw. If the clamp is too large for the pole, consider if the pole diameter is outside the specified range. - Isu: Visible corrosion on components.
Penyelesaian: While the kit is made of stainless steel, extreme environments can still cause surface discoloration. Clean the affected areas. If structural integrity is compromised, replace the affected components.
7. Maklumat Waranti
The LinkPower™ Pole Mount Kit MMK0001-S is backed by a Waranti 3 Tahun from Inscape Data Corporation. This warranty covers defects in materials and workmanship under normal use.
For warranty claims or detailed terms and conditions, please refer to the official Inscape Data Corporation webtapak atau hubungi sokongan pelanggan mereka.
8. Sokongan dan Maklumat Hubungan
For technical assistance, product inquiries, or support, please contact Inscape Data Corporation:
- Webtapak: www.inscapedata.com
- Pengeluar: Inscape Data Corporation
- Alamat: 1620 Oakland Road, STED101, San Jose, CA 95131, USA
- telefon: +1 408-935-8500
- Faks: +1 408-935-8900
Please have your product model number (MMK0001-S) and purchase details ready when contacting support.