GÜDE GSB 20/812 R+L Pillar Drill Instruction Manual

1. Produk Lebihview

The GÜDE GSB 20/812 R+L is a robust pillar drill designed for precise drilling in metal or wood. It features high spindle rotation precision, ensuring accurate results for various applications. The work table height is adjustable to accommodate different workpiece sizes, and the base is equipped with holes for secure floor mounting.

Ciri-ciri utama termasuk:

• Kuasa Motor: 800 W
• Lejang gelendong: 80 mm
• Spindle Speed: 210-2500 min-1 (12 speeds)
• Chuck Capacity: 1-16 mm (Morse Taper B16)
• Kedalaman Tekak: 169 mm
• High Spindle Rotation Precision (<0.02 mm)
• Fungsi Putaran Ke Hadapan dan Songsang
• Adjustable Grey Cast Iron Work Table
• Plat Asas Pepejal

This image shows the GÜDE GSB 20/812 R+L Pillar Drill, highlighting its overall structure and dimensions. The drill features a sturdy column, adjustable work table, and a drill head with controls. Arrows indicate both forward and reverse rotation capabilities. The total height is approximately 1580 mm.

2. Arahan Keselamatan

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating this power tool. Read and understand all instructions before use.

Keselamatan Am

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan.
• Keselamatan Elektrik: Ensure the power supply matches the specifications (400 V – 50 Hz). Do not expose power tools to rain or wet conditions.
• Keselamatan Diri: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and sturdy footwear. Avoid loose clothing, jewelry, and long hair that can get caught in moving parts.
• Penyelenggaraan Alat: Putuskan sambungan palam daripada sumber kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
• Hentian kecemasan: Biasakan diri anda dengan lokasi dan operasi butang berhenti kecemasan.

Pillar Drill Specific Safety

• Bahan Kerja Selamat: Sentiasa clamp the workpiece securely to the work table using appropriate clamps atau maksiat. Jangan sekali-kali memegang bahan kerja dengan tangan.
• Correct Speed: Select the correct drilling speed for the material and drill bit size. Too high a speed can burn the material or dull the bit; too low a speed can cause tearing.
• Drill Bit Condition: Use sharp, undamaged drill bits. Dull or damaged bits can cause kickback or breakage.
• Hentian Kedalaman: Utilize the depth stop for consistent and controlled drilling depth.
• Pembersihan: Ensure adequate clearance for the drill bit and chuck above and below the workpiece.
• Bahan penyejuk: For metal drilling, use appropriate cutting fluid to prolong drill bit life and improve cut quality.

3. Persediaan dan Pemasangan

The GSB 20/812 R+L pillar drill requires assembly before first use. Follow these steps carefully.

Membongkar dan Semakan Komponen

Carefully unpack all components and check against the packing list. The included components are:

• Ketua Mesin
• Lajur
• Plat asas
• Meja Kerja
• Keyless Chuck (1-16 mm)
• Pengawal Chuck
• Morse Taper (B16)

Langkah Perhimpunan

1. Attach Column to Base Plate: Securely fasten the column to the base plate using the provided hardware. Ensure it is stable and upright.
2. Mount Work Table: Slide the work table onto the column. Adjust its height and secure it with the locking mechanism.
3. Install Drill Head: Carefully place the drill head assembly onto the top of the column. Secure it firmly according to the instructions.
4. Insert Morse Taper and Chuck: Clean the Morse taper (B16) and the spindle bore. Insert the taper into the spindle, then firmly attach the keyless chuck to the taper. A light tap with a rubber mallet may be needed to seat it properly.
5. Attach Chuck Guard: Install the chuck guard for safety. Ensure it can be easily adjusted or moved for workpiece access while providing protection during operation.
6. Sambungan Elektrik: Connect the drill to a 400 V – 50 Hz power supply. Ensure proper grounding.
7. Secure to Floor (Optional but Recommended): For maximum stability and safety, fix the base plate to the floor using appropriate anchors through the pre-drilled holes.

4. Arahan Operasi

Follow these steps for safe and effective operation of your GÜDE pillar drill.

Hidupkan/Mati Kuasa

• Untuk mula: Press the green 'ON' button.
• Untuk berhenti: Press the red 'OFF' button or the emergency stop button.

Pelarasan Kelajuan

The drill offers 12 speed settings, ranging from 210 to 2500 min-1. Speed is adjusted by changing the position of the drive belt on the pulleys located under the top cover. Always disconnect power before opening the belt cover and adjusting speeds.

1. Putuskan sambungan gerudi daripada bekalan kuasa.
2. Open the belt cover.
3. Loosen the motor tensioning lever.
4. Refer to the speed chart inside the belt cover to select the desired speed by repositioning the belt.
5. Re-tension the motor and close the belt cover.
6. Sambung semula kuasa.

Depth Stop Adjustment

The depth stop allows for consistent drilling to a predetermined depth.

1. Turunkan mata gerudi sehingga ia hanya menyentuh bahan kerja.
2. Kunci gelendong dalam kedudukan ini.
3. Adjust the depth stop collar to the desired depth and tighten its locking screw.
4. Release the spindle. The drill will now stop at the set depth.

Pemasangan Chuck dan Drill Bit

1. Ensure the drill is disconnected from power.
2. Open the keyless chuck jaws by rotating the chuck sleeve.
3. Insert the drill bit into the chuck, ensuring it is centered and seated firmly.
4. Tighten the chuck jaws securely by hand.

Putaran ke hadapan dan belakang

This model supports both forward (R) and reverse (L) rotation, indicated by the 'R+L' symbol. The direction of rotation can be selected via a switch on the control panel. Reverse rotation is useful for tapping or backing out stuck drill bits.

Bahan kerja Clamping

Sentiasa clamp your workpiece securely to the work table using a drill press vice or appropriate clamps. This prevents the workpiece from spinning, which can cause injury or damage.

5. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your pillar drill.

• Pembersihan: After each use, clean the drill of dust, chips, and debris. Use a brush or vacuum cleaner. Never use compressed air directly on bearings.
• Pelinciran: Periodically lubricate moving parts such as the column, rack, and pinion for table adjustment. Use light machine oil.
• Ketegangan Tali Pinggang: Check the drive belt tension regularly. A loose belt can slip, reducing power and causing wear. Adjust as per the speed adjustment instructions.
• Penyelenggaraan Chuck: Keep the chuck jaws clean and free of debris. If the chuck becomes stiff, clean and lightly lubricate the threads.
• Pemeriksaan Elektrik: Periodically inspect the power cord for damage. Ensure all electrical connections are secure.
• Pemeriksaan Am: Check for any loose screws, nuts, or bolts. Tighten them as necessary. Inspect the chuck guard for damage.

6. Penyelesaian masalah

This section addresses common issues you might encounter with your pillar drill.

7. Spesifikasi Teknikal

Detailed technical data for the GÜDE GSB 20/812 R+L Pillar Drill.

This image displays the official product information sheet for the GÜDE GSB 20/812 R+L Pillar Drill. It includes detailed technical specifications such as motor power, spindle speed, number of speeds, chuck capacity, and dimensions. The sheet also lists key features and components, providing a comprehensive overview of the drill's capabilities.

8. Waranti dan Sokongan

For warranty claims, technical support, or spare parts, please contact your retailer or the manufacturer directly.

For more information, visit the official GÜDE webtapak: www.guede.com

Sila simpan bukti pembelian anda untuk sebarang pertanyaan berkaitan waranti.