1. Pengenalan
This manual provides essential information for the proper setup, operation, and maintenance of your Datalogic BC2030-BK-BT Base Station/Charger. Please read it thoroughly before use to ensure safe and efficient operation.
The Datalogic BC2030-BK-BT is a versatile base station designed to charge compatible Datalogic Bluetooth scanners and facilitate data communication with a host device through its multi-interface capabilities.
2. Maklumat Keselamatan
- Baca semua arahan dengan teliti sebelum mengendalikan peranti.
- Do not expose the base station to extreme temperatures, direct sunlight, or excessive moisture.
- Use only Datalogic approved power adapters and accessories.
- Disconnect the power supply before cleaning the device.
- Do not attempt to disassemble or repair the base station yourself. Refer all servicing to qualified personnel.
3. Kandungan Pakej
Sila sahkan bahawa semua item terdapat dalam pakej anda:
- Datalogic BC2030-BK-BT Base Station/Charger
- Penyesuai Kuasa
- Panduan Mula Pantas (mungkin berbeza mengikut wilayah)
Figure 1: Datalogic BC2030-BK-BT Base Station/Charger. This image shows the black base station with the Datalogic logo and two indicator lights on its front panel, designed to cradle a compatible scanner.
4. Persediaan
4.1. Menyambung Kuasa
- Connect the power adapter cable to the power input port on the rear of the BC2030-BK-BT base station.
- Palamkan penyesuai kuasa ke soket elektrik standard.
- Confirm that the power indicator light on the base station illuminates (if applicable).
4.2. Connecting to a Host Device (Multi-Interface)
The BC2030-BK-BT supports various interfaces for connecting to your host system (e.g., computer, Point-of-Sale system). The specific cable required depends on your system's configuration.
- Identify the appropriate interface cable (e.g., USB, RS232) for your host device.
- Connect one end of the interface cable to the corresponding port on the base station.
- Connect the other end of the interface cable to your host device.
- Ensure the host device recognizes the base station. Driver installation may be required depending on your operating system and interface type.
4.3. Bluetooth Pairing with Scanner
This base station is designed for use with compatible Datalogic Bluetooth scanners.
- Ensure your Datalogic Bluetooth scanner is powered on and in pairing mode. Refer to your scanner's user manual for specific instructions on entering pairing mode.
- Place the scanner into the cradle of the BC2030-BK-BT base station.
- The base station will attempt to establish a Bluetooth connection with the scanner. Observe the indicator lights on both the base station and the scanner for pairing status (e.g., blinking for pairing, solid for connected).
- Once successfully paired, the scanner will be ready for use.
5. Arahan Operasi
5.1. Mengecas Pengimbas
When a compatible Datalogic Bluetooth scanner is correctly placed into the BC2030-BK-BT base station, it will automatically begin charging.
- Ensure the scanner is seated firmly in the cradle, making proper contact with the charging pins.
- The charging indicator light on the base station (and/or the scanner itself) will illuminate to confirm that charging is in progress.
- A full charge cycle duration depends on the scanner model and its battery level.
5.2. Data Communication
Once the scanner is paired with the base station and the base station is connected to a host device, data transmission occurs seamlessly.
- Scanned data from the Datalogic Bluetooth scanner is transmitted wirelessly to the BC2030-BK-BT base station.
- The base station then forwards this data to the connected host device via the established interface (e.g., USB, RS232).
- Ensure the host application is ready to receive data from the scanner.
6. Penyelenggaraan
6.1. Pembersihan
To ensure optimal performance and longevity of your base station, regular cleaning is recommended.
- Always disconnect the power adapter from the base station before cleaning.
- Gunakan yang lembut, sedikit damp cloth to wipe the exterior surfaces of the base station.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the device's finish and internal components.
- Keep the charging contacts free of dust and debris. Use a dry, soft brush if necessary.
6.2. Penyimpanan
When not in use for extended periods, store the BC2030-BK-BT base station in a cool, dry environment, away from direct sunlight and extreme temperatures.
7. Penyelesaian masalah
This section provides solutions to common issues you might encounter with your Datalogic BC2030-BK-BT Base Station/Charger.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Scanner not charging when placed in cradle. | Power adapter not connected or faulty. Scanner not seated correctly. | Check power adapter connection to base station and electrical outlet. Ensure scanner is firmly seated, making contact with charging pins. Try a different outlet or power adapter if available. |
| Scanner not pairing with the base station. | Incorrect pairing procedure. Scanner not in pairing mode. Interference. | Refer to your Datalogic scanner's user manual for the correct Bluetooth pairing steps. Ensure the scanner is within range and not paired to another device. Restart both scanner and base station. |
| No data transmission to host device. | Interface cable loose or incorrect. Host device not recognizing base station. Bluetooth connection lost. | Verify the interface cable is securely connected to both the base station and the host device. Check host device's device manager for recognition. Re-pair the scanner with the base station. Ensure correct drivers are installed on the host. |
| Lampu penunjuk tidak berfungsi. | No power. Device malfunction. | Check power connection. If power is confirmed and lights remain off, contact technical support. |
8. Spesifikasi
- model: BC2030-BK-BT
- Jenama: Datalogik
- Ketersambungan: Bluetooth, Multi-Interface (e.g., USB, RS232)
- warna: Hitam
- Sumber Kuasa: External Power Adapter (compatible with Battery-Powered, Corded Electric, Solar systems for scanner charging)
- Dimensi (L x W x H): Kira-kira 6.7 x 6.2 x 4.4 inci (17 x 15.7 x 11.2 cm)
- Berat: Kira-kira 14.39 auns (408 gram)
- Pengeluar: BlueStar Inc.
- Tarikh Mula-mula Tersedia: 20 Julai 2016
9. Waranti dan Sokongan
For detailed warranty information, technical support, and service inquiries regarding your Datalogic BC2030-BK-BT Base Station/Charger, please refer to the warranty card included with your purchase or visit the official Datalogic webtapak.
Official Datalogic Webtapak: www.datalogic.com
Please have your model number (BC2030-BK-BT) and serial number ready when contacting support.
