Datalogic Quickscan QD2430 2D Barcode Scanner

1. Pengenalan

The Datalogic Quickscan QD2430 2D Barcode Scanner is a general-purpose handheld imager designed for various retail, supply chain, and distribution environments. This manual provides essential information for the proper setup, operation, and maintenance of your scanner, ensuring optimal performance and longevity.

Figure 1: Datalogic Quickscan QD2430 2D Barcode Scanner

2. Maklumat Keselamatan

Please read and follow all safety instructions before using the Datalogic Quickscan QD2430 scanner to prevent injury or damage to the device.

• Do not look directly into the scanner's illumination window when the device is active.
• Do not attempt to open or modify the scanner. Refer all servicing to qualified personnel.
• Jauhkan peranti daripada air dan cecair lain.
• Use only the power source and cables specified by Datalogic.
• Lupuskan peranti dan komponennya mengikut peraturan alam sekitar tempatan.

3. Kandungan Pakej

Sahkan bahawa semua item ada dan dalam keadaan baik semasa membuka bungkusan:

• Datalogic Quickscan QD2430 2D Barcode Scanner
• USB Cable (for connectivity and power)
• Panduan Mula Pantas (jika disertakan)

Jika terdapat sebarang barang yang hilang atau rosak, hubungi pembekal anda dengan segera.

4. Persediaan

Follow these steps to set up your Datalogic Quickscan QD2430 scanner:

1. Sambungkan Kabel USB: Insert the smaller end of the USB cable into the port at the base of the scanner. Connect the larger USB-A end of the cable to an available USB port on your computer or host device.

Figure 2: Scanner with USB cable attached

2. Hidupkan kuasa: The scanner will typically power on automatically once connected to a powered USB port. A successful connection is usually indicated by an audible beep and/or an LED indicator on the scanner.
3. Pemasangan Pemandu: For most operating systems (Windows, macOS, Linux), the scanner will be recognized as a standard USB HID (Human Interface Device) keyboard and will not require specific driver installation. The operating system will install generic drivers automatically.
4. Konfigurasi Awal (Pilihan): If specific settings are required (e.g., keyboard language, symbology enabling/disabling), refer to the full product reference guide for configuration barcodes. These barcodes are typically scanned to program the scanner's behavior.

5. Arahan Operasi

Operating the Datalogic Quickscan QD2430 is straightforward:

1. Hold the Scanner: Grip the scanner comfortably in your hand. The trigger button is located on the underside of the handle.
2. Aim and Scan: Point the scanning window towards the barcode you wish to read. Press and hold the trigger button. The scanner will project an aiming pattern (typically a cross or dot) and illumination.

Figure 3: Scanning window detail

3. Bacaan yang Berjaya: Upon a successful read, the scanner will emit an audible beep and/or an LED indicator will illuminate (e.g., green light). The decoded data will be transmitted to your host device as if typed from a keyboard.
4. Laraskan Jarak: For optimal scanning, adjust the distance between the scanner and the barcode. The ideal distance varies depending on the barcode size and type.
5. Kod Bar 2D: The QD2430 is designed to read both 1D (linear) and 2D (matrix) barcodes. Ensure the entire 2D barcode is within the aiming pattern for a successful read.

6. Penyelenggaraan

Penyelenggaraan yang betul memastikan jangka hayat dan prestasi pengimbas anda:

• Membersihkan Tetingkap Pengimbasan: Use a soft, clean, lint-free cloth, slightly dampened with water or a mild, non-abrasive cleaner, to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
• Membersihkan Casing: Lap bahagian luar casing dengan lembut, damp kain.
• Storan: Apabila tidak digunakan, simpan pengimbas di persekitaran yang bersih dan kering, jauh daripada suhu ekstrem dan cahaya matahari langsung.
• Pemeriksaan Kabel: Periodically inspect the USB cable for any signs of wear or damage. Replace damaged cables immediately.

7. Penyelesaian masalah

If you encounter issues with your scanner, try the following troubleshooting steps:

• Pengimbas Tidak Membaca Kod Bar:
  • Ensure the scanner is properly connected to the host device.
  • Verify that the barcode is not damaged or poorly printed.
  • Periksa jarak dan sudut antara pengimbas dan kod bar.
  • Clean the scanning window if it is dirty.
  • Confirm that the barcode symbology is enabled in the scanner's configuration (refer to the full product manual for configuration barcodes).
• No Power/No Indication:
  • Pastikan kabel USB disambungkan dengan selamat pada kedua-dua pengimbas dan peranti hos.
  • Try connecting the scanner to a different USB port or a different host device to rule out port issues.
  • Check if the host device's USB ports are powered.
• Incorrect Data Transmission:
  • Verify the keyboard layout settings on your host device match the scanner's configuration.
  • Ensure no other applications are interfering with keyboard input.
• Scanner Not Recognized by Host:
  • Mulakan semula peranti hos.
  • Cuba kabel USB lain.

If these steps do not resolve the issue, contact Datalogic support or your reseller.

8. Spesifikasi

9. Maklumat Waranti

Datalogic products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your Quickscan QD2430 scanner, please refer to the warranty card included with your product or visit the official Datalogic webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

10. Sokongan

For technical assistance, product documentation, or customer service, please visit the official Datalogic support website or contact your local Datalogic representative. You can find contact information and resources at www.datalogic.com.