pengenalan
Thank you for choosing the Adcraft USSL-2D U-Star 2-Door Salad/Sandwich Refrigerated Prep Table. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new commercial refrigeration unit. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Image: Adcraft USSL-2D U-Star 2-Door Salad/Sandwich Refrigerated Prep Table, showcasing its stainless steel exterior, two doors, and top prep area with an insulated lid.
Arahan Keselamatan
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electrical shock, or injury.
- Keselamatan Elektrik: Ensure the unit is connected to a properly grounded 115V/60Hz/1-ph power supply with a dedicated circuit. Do not use extension cords.
- penempatan: Position the unit on a level, stable surface. Allow adequate clearance around the unit for proper ventilation (minimum 6 inches from walls).
- Pengendalian: The unit is heavy (357 lbs). Use appropriate lifting equipment and personnel when moving or installing.
- Pembersihan: Disconnect power before cleaning. Use mild, non-abrasive cleaners.
- Penyelenggaraan: Hanya kakitangan perkhidmatan yang berkelayakan harus melakukan pembaikan.
- Pengudaraan: Do not block air vents or condenser coils.
- Keselamatan Makanan: Maintain proper temperatures to ensure food safety.
Persediaan
- Membongkar: Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage to the carrier immediately.
- Pemasangan Kastor: The unit comes with (4) 6-inch casters (2 locking and 2 non-locking). Attach the casters to the bottom of the unit, ensuring the locking casters are positioned at the front for stability.
- penempatan: Move the unit to its desired location. Ensure the floor is level and strong enough to support the unit's weight. Maintain at least 6 inches of clearance from walls and other equipment for proper airflow.
- Sambungan Kuasa: Plug the unit into a dedicated 115V/60Hz/1-ph electrical outlet. The unit requires a NEMA 5-15P plug.
- Cutting Board & Food Pans: Place the 3/4-inch thick removable polyethylene cutting board on the top prep area. Insert the (12) 1/6 pans into the designated slots.
- Permulaan Awal: Allow the unit to sit for at least 2 hours after moving before plugging it in to allow refrigerants to settle.
Arahan Operasi
Pengawal Suhu Digital
The unit is equipped with a precise digital temperature controller with an LED display for easy monitoring and adjustment.
- Hidupkan/Mati Kuasa: Press the power button (usually marked with a circle and vertical line) to turn the unit on or off.
- Paparan suhu: The LED display shows the current internal temperature.
- Menetapkan Suhu: Refer to the controller's specific instructions (often a "SET" button) to adjust the desired temperature. Allow several hours for the unit to reach the set temperature after initial startup or adjustment.
- Penyahbekuan Automatik: The unit features automatic defrosting, which periodically clears ice buildup from the evaporator coil. During defrost cycles, the temperature display may temporarily rise.
Food Preparation Area
- Insulated Hinged Lid: Keep the insulated hinged lid closed when not actively preparing food to maintain optimal temperatures in the food pans and conserve energy.
- Food Pans: Utilize the provided 1/6 pans for ingredients. Ensure pans are properly seated to allow for efficient cooling.
- Papan pemotong: The removable polyethylene cutting board provides a convenient and sanitary surface for food preparation.
Penyelenggaraan
Regular maintenance ensures optimal performance and extends the lifespan of your prep table.
- Pembersihan Harian:
- Wipe down all stainless steel surfaces with a soft cloth and mild, non-abrasive cleaner.
- Clean the removable polyethylene cutting board thoroughly after each use.
- Clean the interior of the cabinet and shelves with a mild soap and water solution.
- Penyelenggaraan Gasket Pintu: Regularly inspect door gaskets for tears or damage. Clean gaskets with warm, soapy water to maintain a tight seal. Replace damaged gaskets promptly.
- Condenser Coil Cleaning (Monthly/Quarterly):
The condenser coil, located at the rear, can accumulate dust and debris, reducing efficiency. Disconnect power before cleaning. Use a stiff brush or vacuum cleaner to remove dirt from the coil fins. For stubborn buildup, professional cleaning may be required.
- Loyang Longkang: Periodically check and clean the drain pan to prevent blockages and odors.
Menyelesaikan masalah
Sebelum menghubungi untuk servis, semak isu-isu biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Unit tidak menyejukkan | Power supply issue, thermostat setting, dirty condenser coil, door left open. | Check power connection and circuit breaker. Adjust thermostat. Clean condenser coil. Ensure doors are closed properly. |
| Kebisingan yang berlebihan | Loose components, fan motor issue, unit not level. | Check for loose parts. Ensure unit is level. If noise persists, contact service. |
| Air di atas lantai | Clogged drain line, excessive humidity, door gasket issue. | Clear drain line. Ensure doors are sealed. Reduce humidity if possible. |
Jika langkah penyelesaian masalah tidak menyelesaikan isu, hubungi juruteknik perkhidmatan yang berkelayakan.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | USSL-2D |
| Dimensi (W x D x H) | 47-3/4" wide (approx. 52"D x 47"H overall) |
| Kapasiti | 12.0 cu. kaki |
| Pintu | 2 |
| rak | (2) plastic coated wire shelves |
| Papan Pemotong | 3/4" thick removable polyethylene |
| Food Pans Included | (12) 1/6 pans |
| Bahan penyejuk | Self-contained, rear mounted |
| Elektrik | 115v/60/1-ph, 7.8 amps, 1/3 HP |
| Jenis Palam | NEMA 5-15P |
| Pemutus | (4) 6" casters (2 locking, 2 non-locking) |
| Bahan Luaran | 430 keluli tahan karat |
| Bahan Dalaman | 304 keluli tahan karat |
| Berat badan | 357 paun |
Waranti dan Sokongan
Adcraft products are manufactured to high standards and are designed for commercial use. For specific warranty details, please refer to the warranty card included with your product or visit the official Adcraft webtapak. Simpan resit pembelian anda untuk tuntutan waranti.
For technical assistance, parts, or service inquiries, please contact Adcraft Customer Support. You can often find contact information on the manufacturer's webtapak atau melalui pengedar sah anda.
Note: Unauthorized service or modifications may void the warranty.
