Manual Pengguna Penstabil Buih Lakur Bosal 493-36 Dalam Bentuk R Plus

1. Produk Lebihview

The Bosal In-R-Form Plus Fusible Foam Stabilizer (Model 493-36) is a unique foam stabilizer designed for various crafting and sewing projects, particularly for bag making. It provides stability and shape, allowing finished items to maintain their structure. This product is soft, formable, easy to stitch, and needle-friendly. It features a double-sided fusible adhesive laminated to napped tricot, measuring 36 inches by 58 inches.

2. Persediaan dan Persediaan

Before applying the Bosal In-R-Form Plus Fusible Foam Stabilizer, ensure your fabric is prepared according to its specific care instructions. The stabilizer itself requires no special preparation other than cutting it to the desired size for your project.

Pertimbangan Penting:

• Always follow the instructions for the fabric you are using first, especially regarding heat settings.
• In-R-Form can withstand a cotton setting on most irons.
• If working with delicate or fragile fabrics, use the fabric's recommended iron setting as your guide.

3. Arahan Permohonan

Follow these steps for optimal application of the Bosal In-R-Form Plus Fusible Foam Stabilizer:

1. Sediakan Permukaan: Ensure both your fabric and the stabilizer are clean and free of wrinkles. Cut the stabilizer to the required dimensions for your project.
2. Position Stabilizer: For fusible products, always place the In-R-Form stabilizer bawah the fabric being fused.
3. Sapukan Haba: Never place a hot iron directly onto the fusible side of the In-R-Form. Iron from the fabric side. Use an iron setting appropriate for your fabric, up to a cotton setting. Apply even pressure.
4. Double-Sided Application: If using double-sided In-R-Form, fabric may be placed and fused onto both sides of the fusible foam.
5. Sejukkan Diri: Allow the fused pieces to cool completely before handling extensively to ensure a strong bond.

4. Penjagaan dan Penyelenggaraan

Proper care ensures the longevity of your projects made with Bosal In-R-Form Plus Fusible Foam Stabilizer:

• Mencuci: In-R-Form can be machine washed.
• Pengeringan: It can be tumble dried with NO heat or air dried. Avoid high heat settings during drying to prevent damage to the foam or adhesive.

5. Penyelesaian masalah

If you encounter issues during application, consider the following:

• Stabilizer Not Adhering: Ensure sufficient heat and pressure are applied. Verify that the iron setting is appropriate for your fabric and that you are ironing from the fabric side, not directly onto the fusible surface. Some materials, like certain leathers, may not bond effectively with fusible stabilizers and might require stitching.
• Bubbling or Uneven Surface: This can occur if the stabilizer is not smoothed properly before fusing or if heat is unevenly applied. Ensure the stabilizer is flat and smooth against the fabric before ironing.
• Stiffness Issues: If the finished project is too stiff or not stiff enough, review your fabric choice and the amount of stabilizer used. For softer results, consider using a single layer or a different type of interfacing.

6. Spesifikasi Produk

7. Maklumat Waranti

Specific warranty details for Bosal In-R-Form Plus Fusible Foam Stabilizer are typically provided at the point of purchase or can be found on the official Bosal Foam & Fiber website. For any concerns regarding product quality or defects, please refer to the manufacturer's official warranty policy.

8. Sokongan Pelanggan

For further assistance, questions, or support regarding your Bosal In-R-Form Plus Fusible Foam Stabilizer, please contact Bosal Foam & Fiber directly: