BENINCA Bull 424R Sliding Gate Opener User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your BENINCA Bull 424R Sliding Gate Opener. The Bull 424R is a silent, powerful, and reliable 24VDC operator designed for intensive use with sliding gates. It features an LCD display for easy programming, internal limit-switches, and multiple electronic settings for torque and timing adjustments.

Please read this manual thoroughly before beginning installation or operation to ensure safe and correct use of the product.

2. Maklumat Keselamatan

AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan kecederaan serius atau kerosakan harta benda.

• Installation must be performed by qualified personnel in compliance with local safety regulations.
• Ensure the power supply is disconnected before performing any installation, maintenance, or repair work.
• Pastikan tangan, kaki dan pakaian jauh daripada pintu pagar dan mekanisme pembuka semasa operasi.
• Jangan benarkan kanak-kanak bermain atau mengendalikan alat kawalan pembuka pintu pagar.
• Periksa pintu pagar dan pembuka secara berkala untuk tanda-tanda haus, kerosakan atau ketidaksejajaran.
• Ensure all safety devices (e.g., photocells, safety edges) are correctly installed and functioning.

3. Kandungan Pakej

Sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:

• BENINCA Bull 424R Sliding Gate Opener Unit
• Control Panel (integrated)
• Unit Penerima
• Two (2) Remote Controls
• Five (5) sections of 39-inch Rack Gear
• Installation Hardware (bolts, nuts, washers - specific quantities may vary)
• Manual Pengguna (dokumen ini)

Figure 3.1: Complete BENINCA Bull 424R Sliding Gate Opener kit components.

4. Persediaan dan Pemasangan

4.1 Pemasangan Mekanikal

1. Memasang Pembuka: Securely mount the BENINCA Bull 424R motor unit on a stable, level concrete base next to the gate, ensuring proper alignment with the gate's movement path.
2. Installing the Rack Gear: Attach the rack gear sections along the bottom edge of the sliding gate. Ensure the rack meshes correctly with the opener's pinion gear, maintaining a small clearance (approximately 1-2mm) to prevent binding.
3. Had Pelarasan Suis: Adjust the internal limit switches to define the gate's fully open and fully closed positions. Refer to the control panel's specific instructions for precise adjustment.

4.2 Sambungan Elektrik

Semua sambungan elektrik hendaklah dibuat oleh juruelektrik yang bertauliah.

1. Bekalan Kuasa: Connect the 24VDC power supply to the designated terminals on the control board. Ensure correct polarity.
2. Peralatan keselamatan: Connect any external safety devices, such as photocells or safety edges, to their respective terminals on the control board.
3. Unit Penerima: Connect the included receiver unit to the control board. This unit allows the remote controls to operate the gate.

Figure 4.1: BENINCA Receiver and Remote Control Kit.

4.3 Programming the Control Panel and Remotes

The BENINCA Bull 424R features an LCD display for easy programming and digital adjustment of torque and timing.

1. Kuasa Permulaan: After all electrical connections are made, apply power to the unit. The LCD display will illuminate.
2. Mengakses Menu: Use the control panel buttons (usually labeled MENU, UP, DOWN, ENTER) to navigate the programming menu.
3. Learning Remote Controls: Follow the on-screen instructions to program the remote controls. Typically, this involves selecting a "Learn Remote" option and pressing a button on each remote control.
4. Melaraskan Parameter: Utilize the menu to set parameters such as motor torque, gate speed, automatic closing time, and obstacle detection sensitivity.

Figure 4.2: BENINCA Remote Control.

5. Arahan Operasi

Once installed and programmed, operating your BENINCA Bull 424R gate opener is straightforward.

5.1 Menggunakan Alat Kawalan Jauh

• Press the designated button on your remote control once to open the gate.
• Press the button again while the gate is moving to stop it.
• Press the button a third time to reverse the gate's direction (if stopped mid-cycle) or to close it (if fully open).

5.2 Keluaran Manual

In case of power failure or malfunction, the gate can be operated manually. Locate the manual release mechanism on the motor unit (refer to the specific diagram in your product's quick start guide for exact location). Engage the release mechanism to disengage the motor, allowing the gate to be moved by hand.

6. Penyelenggaraan

Regular maintenance ensures the longevity and reliable operation of your gate opener.

• Bulanan: Inspect the gate's movement for any obstructions. Check the rack gear for debris and ensure it is securely fastened.
• Suku tahunan: Lubricate the gate's wheels, hinges, and any moving parts as recommended by the gate manufacturer. Check the condition of the power cable and all electrical connections.
• Setiap tahun: Have a qualified technician inspect the entire system, including the motor, control board, safety devices, and gate structure, for wear or damage.

CAUTION: Always disconnect power to the unit before performing any maintenance.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your BENINCA Bull 424R gate opener.

8. Spesifikasi

Key technical specifications for the BENINCA Bull 424R Sliding Gate Opener:

• model: BENINCA Bull 424R
• Pengeluar: Beninca
• Jenis Motor: 24VDC
• Panel Kawalan: Disepadukan dengan paparan LCD
• Suis Had: Dalaman
• Pengaturcaraan: Digital adjustment for torque and timing
• ASIN: B01FG7NE18
• Tarikh Mula-mula Tersedia: 22 April 2018

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized BENINCA dealer. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official BENINCA webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.