pengenalan
Thank you for choosing the Stetsom Vulcan 9K EQ - 1 Ohm 9000W RMS Full Range High Power Amppengaturcara. Manual ini menyediakan maklumat penting untuk pemasangan, pengendalian dan penyelenggaraan yang betul bagi amplifier. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
Maklumat Keselamatan Penting
- Always disconnect the vehicle's battery before making any electrical connections.
- Pastikan pembumian yang betul untuk mengelakkan bahaya elektrik.
- Pasangkan amppenyangga di kawasan pengudaraan yang baik untuk mengelakkan terlalu panas.
- Use appropriate gauge wiring for power and speaker connections as specified in this manual.
- Elakkan daripada mendedahkan amppenguat kepada kelembapan atau suhu yang melampau.
- Jangan cuba membuka atau membaiki amplifier yourself. Refer all servicing to qualified personnel.
Produk Selesaiview
The Stetsom Vulcan 9K EQ is a high-power, full-range digital amplifier designed for automotive audio systems. It features a robust design and advanced equalization capabilities to deliver powerful and clear sound reproduction.
Ciri-ciri Utama:
- 9000W RMS power output at 1 Ohm (12.6V)
- Full Range frequency response (10Hz to 15KHz)
- Built-in 3-band equalizer (Bass, Mid Bass, Mid High)
- Over Clip +15% Power indicator
- Protection circuits for safe operation
Pengenalan Komponen:
The amplifier features power, protection, and clip indicators on the front panel. The input and output terminals are located on the side for easy access during installation.
Pemasangan dan Persediaan
1. Sambungan Kuasa:
- Power Cable (B+): Connect a heavy-gauge power cable directly from the positive terminal of the vehicle's battery to the B+ terminal on the amplifier. An inline fuse or circuit breaker (not included) must be installed within 18 inches (45 cm) of the battery.
- Ground Cable (GND): Connect a heavy-gauge ground cable from the GND terminal on the amplifier to a clean, unpainted metal surface of the vehicle chassis. Ensure a solid, low-resistance connection.
- Penghidupan Jauh (REM): Sambungkan wayar hidup jauh dari output jauh unit kepala anda ke terminal REM pada amppengikat. Wayar ini memberi isyarat kepada amplampu untuk menghidupkan dan mematikan sistem audio anda.
2. Audio Input Connections:
Connect RCA cables from your head unit's pre-out (RCA output) to the RCA input jacks on the amplifier. Ensure correct left and right channel connections if applicable, though this is a mono amplebih hidup.
3. Speaker Output Connections:
Connect your subwoofer(s) or full-range speakers to the speaker output terminals on the amplifier. Pay close attention to polarity (+ and -) and ensure the total impedance of your speakers matches the amplifier's rated impedance (1 Ohm for this model). Refer to the specifications section for impedance details.
4. Pemasangan:
Lekapkan amplifier securely in a location that provides adequate ventilation and protection from moisture. Avoid mounting it directly on carpet or in enclosed spaces without airflow.
Arahan Operasi
1. Pengaktifan Awal:
After all connections are made, reconnect the vehicle's battery. Turn on your head unit. The "POWER" indicator on the amplifier should illuminate, indicating it is receiving power and is operational.
2. Pelarasan Keuntungan:
Laraskan kawalan keuntungan pada amppenguat untuk memadankan vol keluarantage of your head unit. Start with the gain at its minimum setting. Play a familiar track at about 75% of your head unit's maximum volume. Slowly increase the amplifier's gain until you hear distortion, then back it off slightly. The "CLIP" indicator should only flash briefly on very dynamic peaks, not stay illuminated.
3. Tetapan Crossover:
The Vulcan 9K EQ features adjustable crossovers:
- Penapis Lulus Rendah (LPF): Adjust this control to set the upper frequency limit for your subwoofers. Frequencies above this setting will be attenuated.
- Penapis Lulus Tinggi (HPF): Adjust this control to set the lower frequency limit for your speakers. Frequencies below this setting will be attenuated. This is typically used for full-range speakers or mid-bass drivers.
Refer to your speaker manufacturer's recommendations for optimal crossover points.
4. Equalizer Adjustment (3-Band EQ):
The amplifier includes a 3-band equalizer to fine-tune the audio output:
- Bes: Melaraskan tindak balas frekuensi rendah.
- Bas Pertengahan: Adjusts the mid-low frequency response.
- Pertengahan Tinggi: Adjusts the mid-high frequency response.
Make small adjustments and listen carefully to achieve your desired sound balance. Avoid excessive boosting, which can lead to distortion or speaker damage.
Penyelenggaraan
- Simpan ampPastikan penghawa dingin bersih dan bebas daripada habuk dan serpihan. Gunakan kain lembut dan kering untuk membersihkan.
- Pastikan aliran udara yang mencukupi di sekeliling amplifier at all times to prevent overheating. Regularly check that cooling fins are not obstructed.
- Periksa semua sambungan pendawaian secara berkala untuk memastikan ia ketat dan berkarat. Sambungan yang longgar boleh menyebabkan masalah prestasi atau kerosakan.
Panduan Penyelesaian Masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada Kuasa / Amppenyangga tidak dihidupkan |
|
|
| Tiada Keluaran Bunyi |
|
|
| Amplifier in Protection Mode (PROT light on) |
|
|
| Bunyi Herot |
|
|
Spesifikasi Teknikal
| Ciri | Nilai |
|---|---|
| RMS Power at 1 Ohm (12.6V) | 1 x 9,000W RMS |
| RMS Power at 2 Ohm (12.6V) | 1 x 5,400W RMS |
| RMS Power at 4 Ohm (12.6V) | 1 x 3,200W RMS |
| RMS Power at 1 Ohm (13.8V) | 1 x 10,000W RMS |
| RMS Power at 2 Ohm (13.8V) | 1 x 6,400W RMS |
| RMS Power at 4 Ohm (13.8V) | 1 x 3,900W RMS |
| Bekalan Voltage | 9.5 ~ 15 V |
| Respons Kekerapan | 10Hz ~ 15KHz |
| Crossover Low Pass | 50Hz ~ 15KHz |
| Hantaran Tinggi Crossover | 10Hz ~ 70Hz |
| Nisbah Isyarat kepada Bunyi | > 90 dB |
| Harmonic Distortion (THD) | < 0.9 % |
| Sensitiviti Input | 0.2V |
| Impedans Input | 27K Ohms |
| Impedans Keluaran | 1 Ohm |
| Consumption (Musical Signal) | 6.7A ~ 445A (12.6V) |
| Consumption (Bass Signal) | 6.7A ~ 890A (12.6V) |
| Dimensi (H x W x D) | 75.5 x 308 x 510 mm |
| Berat badan | 7.4 Kg |
Waranti dan Sokongan
Stetsom products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Stetsom website. For technical support or service inquiries, please contact your authorized Stetsom dealer or Stetsom customer service.
Webtapak: www.stetsom.com.br (Cthamppautan le, pautan sebenar mungkin berbeza-beza)
