Manual Pengguna Bar Bunyi Bluetooth Edifier B3

pengenalan

Terima kasih kerana membeliasing the Edifier B3 Bluetooth Soundbar. This manual provides detailed instructions for the proper setup, operation, and maintenance of your soundbar. Please read this manual thoroughly before use to ensure optimal performance and safety.

Arahan Keselamatan Penting

• Baca arahan ini.
• Simpan arahan ini.
• Patuhi semua amaran.
• Ikut semua arahan.
• Jangan gunakan alat ini berhampiran air.
• Bersihkan hanya dengan kain kering.
• Jangan sekat sebarang bukaan pengudaraan. Pasang mengikut arahan pengilang.
• Jangan pasang berhampiran mana-mana sumber haba seperti radiator, daftar haba, dapur, atau radas lain (termasuk amppenghidup) yang menghasilkan haba.
• Lindungi kord kuasa daripada berjalan atau tersepit, terutamanya pada palam, bekas kemudahan dan tempat keluar dari radas.
• Hanya gunakan lampiran/aksesori yang ditentukan oleh pengilang.
• Cabut plag radas ini semasa ribut petir atau apabila tidak digunakan untuk jangka masa yang lama.
• Rujuk semua servis kepada kakitangan perkhidmatan yang berkelayakan. Servis diperlukan apabila radas telah rosak dalam apa jua cara, seperti kord bekalan kuasa atau palam rosak, cecair telah tertumpah atau objek jatuh ke dalam radas, radas telah terdedah kepada hujan atau lembapan, tidak beroperasi seperti biasa. , atau telah digugurkan.

Kandungan Pakej

Image: The Edifier B3 Soundbar shown with its included accessories: wall mount bracket, AUX cable, optical cable, and remote control.

Sila semak kandungan pakej anda. Jika ada barang yang hilang atau rosak, hubungi peruncit anda.

• Edifier B3 Soundbar
• Alat Kawalan Jauh
• Pendakap Pelekap Dinding
• Kabel Audio AUX
• Kabel Audio Optik
• Kabel Kuasa
• Manual Pengguna (dokumen ini)

Produk Selesaiview

Familiarize yourself with the various parts and controls of your Edifier B3 Soundbar.

Imej: Sebelah view of the Edifier B3 Soundbar, highlighting the control panel on the right end with volume up (+), power/input selection (circle with line), and Bluetooth pairing (Bluetooth symbol) buttons.

Imej: Depan view of the Edifier B3 Soundbar with the grille removed, revealing the multiple speaker drivers arranged across its length, and the Edifier logo in the center.

Kawalan Panel Depan:

• Kelantangan Naik (+): Increases the volume.
• Power / Input Selection (● / —): Press to power on/off. Short press to cycle through input modes (AUX, Optical, Coaxial, Bluetooth).
• Bluetooth Pairing (␦): Press and hold to enter Bluetooth pairing mode.

Sambungan Panel Belakang:

• Input Optik: For connecting to devices with an optical audio output.
• Input sepaksi: For connecting to devices with a coaxial audio output.
• Input AUX: For connecting to devices with a 3.5mm or RCA audio output.
• Input Kuasa: Connects to the AC power supply.

Fungsi Kawalan Jauh:

• Butang Kuasa: Menghidupkan atau mematikan bar bunyi.
• Butang Redam: Membisukan atau menyahbisukan bunyi.
• Kelantangan Naik/Turun: Melaraskan tahap kelantangan.
• Input Selection Buttons (AUX, Optical, Coaxial, Bluetooth): Directly selects the desired audio input.
• Sound Mode Buttons (News, Movie, 3D): Selects different audio equalization modes for optimized listening experiences.
• Putuskan sambungan Bluetooth: Disconnects the current Bluetooth device.

Persediaan

penempatan:

Place the soundbar on a stable, flat surface in front of your TV, or mount it on the wall using the included wall mount bracket. Ensure there are no obstructions in front of the soundbar for optimal sound dispersion.

Menyambung kepada Kuasa:

1. Connect the power cable to the power input port on the rear of the soundbar.
2. Palamkan hujung kabel kuasa yang lain ke salur keluar dinding.

Sambungan Audio:

Pilih salah satu daripada kaedah sambungan berikut berdasarkan peranti sumber anda:

Sambungan Optik:

1. Connect one end of the optical cable to the optical output port on your TV or audio source.
2. Connect the other end of the optical cable to the "OPTICAL" input port on the rear of the soundbar.

Sambungan Koaksial:

1. Connect one end of the coaxial cable to the coaxial output port on your TV or audio source.
2. Connect the other end of the coaxial cable to the "COAXIAL" input port on the rear of the soundbar.

Sambungan AUX:

1. Connect one end of the 3.5mm to RCA audio cable (or 3.5mm to 3.5mm if applicable) to the audio output port on your device.
2. Connect the other end to the "AUX" input port on the rear of the soundbar.

Arahan Operasi

Hidupkan/Mati Kuasa:

• Press the Power button on the remote control or the Power/Input button on the soundbar to turn it on or off.

Memilih Sumber Input:

• Press the corresponding input button (AUX, Optical, Coaxial, Bluetooth) on the remote control.
• Alternatively, short press the Power/Input button on the soundbar to cycle through the input modes.

Pairing Bluetooth:

1. Select Bluetooth input on the soundbar. The indicator light will flash rapidly.
2. On your Bluetooth device (e.g., smartphone, tablet), search for "EDIFIER B3" in the Bluetooth settings.
3. Select "EDIFIER B3" to pair. Once connected, the indicator light will glow steadily.
4. To disconnect a paired device, press and hold the Bluetooth button on the soundbar or the Bluetooth Disconnect button on the remote.

Note: The soundbar features Bluetooth 4.0 for stable wireless connectivity.

Melaraskan Kelantangan:

• Use the Volume Up (+) or Volume Down (-) buttons on the remote control or the soundbar itself.

Mod Bunyi:

Use the remote control to select different sound modes:

• Mod Berita: Optimizes audio for clear dialogue.
• Mod Filem: Enhances bass and surround effects for cinematic experiences.
• Mod 3D: Creates a wider, more immersive soundstage.

Note: Sound modes can only be changed via the remote control.

The soundbar has a 10-minute inactivity auto-sleep feature to conserve power.

Penyelenggaraan

• Pembersihan: Use a soft, dry cloth to clean the surface of the soundbar. Do not use abrasive cleaners, waxes, or solvents.
• Penyimpanan: If storing the soundbar for an extended period, unplug it from the power outlet and store it in a cool, dry place.
• Pengudaraan: Ensure proper ventilation around the soundbar. Do not block any ventilation openings.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

Edifier products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Edifier webtapak.

For technical support, troubleshooting assistance, or service inquiries, please contact Edifier customer support. Contact details can typically be found on the Edifier webtapak atau pada pembungkusan produk anda.

Manufacturer: Synnex Canada Dropship

Untuk bantuan lanjut, anda boleh melawati Kedai Edifier di Amazon.