Phanteks RGB LED 4 Pin Adapter (PH-CB_RGB4P) Instruction Manual

1. Pengenalan

The Phanteks RGB LED 4 Pin Adapter (PH-CB_RGB4P) provides a solution for integrating Phanteks RGB lighting products with compatible motherboard RGB control software. This adapter enables synchronization and control of your Phanteks LED strips and Phanteks cases' RGB lighting directly through your motherboard's software interface, offering unified lighting management.

2. Ciri-ciri

• Motherboard RGB Software Compatibility: Designed to work with motherboards featuring a 4-pin RGB header, such as ASUS Aura Ready systems.
• Unified Lighting Control: Allows synchronization of Phanteks cases (e.g., Luxe, Mini XL, P400 series) and Phanteks LED strips with your motherboard's lighting software.
• Pencahayaan yang boleh disesuaikan: Enables users to customize and colorize LED strips and case LEDs directly through the motherboard's software.
• Pemasangan Mudah: Features a plug-and-play design for straightforward setup.
• Panjang Lanjutan: Provides a 609mm (24-inch) cable length for convenient routing and cable management within a PC chassis.
• Konfigurasi Penyambung: Includes one RGB LED Extension Connector (12V, G, R, B), one Motherboard RGB LED Connector, and one RGB LED Strip Connector. Terminal Gender: Male-Female.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1x Phanteks RGB LED 4 Pin Adapter (PH-CB_RGB4P)
• 1x Risalah Arahan

Image: Package contents including the adapter cable and documentation.

4. Persediaan dan Pemasangan

Follow these steps to install the Phanteks RGB LED 4 Pin Adapter:

1. Sistem Matikan Kuasa: Ensure your computer system is completely powered off and disconnected from the main power supply before beginning installation.
2. Locate Motherboard RGB Header: Identify the 4-pin RGB header on your motherboard. This header is typically labeled as "RGB_HEADER," "LED_HEADER," or similar, and usually provides 12V, G, R, B pins. Consult your motherboard manual for the exact location and pinout.
3. Connect Adapter to Motherboard: Connect the motherboard RGB LED connector end of the PH-CB_RGB4P adapter to the 4-pin RGB header on your motherboard. Ensure the connector is oriented correctly according to the 12V, G, R, B pinout.
4. Connect Adapter to Phanteks RGB Product: Connect the RGB LED Strip Connector end of the PH-CB_RGB4P adapter to your Phanteks LED strip or the RGB input of your Phanteks case's lighting system.
5. Pengkabelan Selamat: Route the adapter cable neatly to avoid interference with other components and to ensure proper airflow. Utilize the 24-inch length for optimal cable management.
6. Sistem Hidupkan Kuasa: Once all connections are secure, reconnect your computer to the power supply and power it on.

Imej: Selesaiview of the Phanteks RGB LED 4 Pin Adapter.

Image: Detail of the 12V input connector on the adapter.

Image: Detail of a 4-pin connector on the adapter.

Important Note for Phanteks P400S Case Owners: If your Phanteks P400S case utilizes a SATA power connector for its integrated RGB controller, be aware that disconnecting this SATA power may also affect the case's fan controller, as they can be on the same board. This adapter bypasses the case's internal RGB controller, allowing direct motherboard control. Consult your case manual for specific details regarding its internal wiring.

5. Operasi

Once the Phanteks RGB LED 4 Pin Adapter is correctly installed, the RGB lighting of your connected Phanteks products will be controlled by your motherboard's dedicated RGB software. Examples include ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, etc. Launch the respective software on your computer to customize colors, effects, and synchronization settings for your lighting.

• Kawalan Perisian: Use your motherboard's RGB software to select desired colors, lighting patterns, and synchronization modes.
• Penyegerakan: The adapter facilitates the transfer of RGB signals from the motherboard to the connected Phanteks lighting, ensuring synchronized effects across your system.

6. Penyelesaian masalah

If you encounter issues with your Phanteks RGB LED 4 Pin Adapter, refer to the following troubleshooting steps:

• No Lighting or Incorrect Colors:
  • Semak Sambungan: Ensure all connectors (motherboard, adapter, Phanteks RGB product) are firmly seated and correctly oriented.
  • Verify Pinout: Confirm that the adapter is connected to a 4-pin 12V, G, R, B RGB header on your motherboard. Some motherboards may have different pin assignments or 5-pin headers (RGBW) which are not compatible with this 4-pin adapter without modification. Refer to your motherboard manual.
  • Perisian Papan Induk: Ensure your motherboard's RGB control software is installed, up-to-date, and properly configured to detect and control the RGB header.
• Pencahayaan Malap:
  • Penghantaran Kuasa: Verify that the motherboard RGB header is supplying adequate power. This is typically handled automatically, but ensure no other high-power RGB devices are overloading the header.
• Interference with Case Controls (P400S specific):
  • If your Phanteks P400S case's fan controller stops working after installing this adapter, it may be due to the case's internal RGB and fan controllers sharing a SATA power connection. This adapter is designed to bypass the case's RGB controller for direct motherboard control. If you require the case's fan controller, you may need to use the case's original RGB control method or consult Phanteks support for alternative solutions.

7. Spesifikasi

8. Waranti dan Sokongan

For detailed warranty information, technical support, or further assistance with your Phanteks RGB LED 4 Pin Adapter, please visit the official Phanteks website or contact Phanteks customer service directly.

Official Phanteks Webtapak: www.phanteks.com