1. Pengenalan
This manual provides essential information for the proper installation, operation, and maintenance of your KICKER CompQ12 Q-Class 12-Inch (30cm) Dual Voice Coil (DVC) 2-Ohm Subwoofer. Please read these instructions thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.
The KICKER CompQ12 subwoofer is engineered for high-caliber bass reproduction, featuring oversized voice coils for significant power handling and robust magnets for high sound pressure levels (SPL). Its design incorporates advanced technology for precise control and durability under demanding conditions.
2. Maklumat Keselamatan
Sentiasa patuhi langkah keselamatan berikut:
- Disconnect the vehicle's battery before installing any audio components to prevent electrical shorts.
- Ensure all wiring is properly insulated and secured to prevent damage and short circuits.
- Avoid installing the subwoofer in locations where it may be exposed to moisture or excessive heat.
- Use appropriate gauge wiring for power and speaker connections to handle the subwoofer's power requirements.
- Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use caution when adjusting volume levels.
3. Apa yang ada di dalam Kotak
Upon unpacking, verify that the following item is included:
- One KICKER CompQ 12-inch Subwoofer (Model: 42CWQ122)
4. Pemasangan
4.1 Pertimbangan Pemasangan
The KICKER CompQ12 subwoofer requires a suitable enclosure for optimal performance. Ensure the mounting location provides adequate space and structural integrity to support the subwoofer's weight and output.
- Kedalaman Pemasangan: 7-1/8 inci (18.1 cm)
- Dimensi Produk (Keseluruhan): Approximately 13.78"D x 13.78"W x 11.81"H (This refers to the overall package/product dimensions, not just the subwoofer itself. For mounting, the diameter and depth are key.)
- Saiz pembesar suara: 12 Inci
- Diameter subwufer: 12.5 Inci
Figure 1: Kicker CompQ12 Subwoofer with key dimensions for installation.
Ensure the enclosure provides sufficient internal volume and is constructed from sturdy materials to prevent resonance and air leaks.
4.2 Wiring the Dual Voice Coil (DVC) Subwoofer
The CompQ12 features a Dual Voice Coil (DVC) design with a 2-Ohm impedance per coil. This allows for flexible wiring configurations to match various amplifier loads. Always verify your amplifier's stable impedance range before wiring.
Common Wiring Configurations for a DVC 2-Ohm Subwoofer:
- Beban 1-Ohm (Pendawaian Selari): Sambungkan terminal positif kedua-dua gegelung suara bersama-sama, dan terminal negatif kedua-dua gegelung suara bersama-sama. Kemudian sambungkan gabungan positif ke ampoutput positif lifer dan gabungan negatif kepada amplifier's negative output. This configuration results in a 1-Ohm load, suitable for amplifiers stable at 1-Ohm.
- Beban 4-Ohm (Pendawaian Siri): Sambungkan terminal positif satu gegelung suara ke terminal negatif gegelung suara yang satu lagi. Kemudian sambungkan baki terminal positif bebas ke ampoutput positif lifer dan baki terminal negatif bebas kepada amplifier's negative output. This configuration results in a 4-Ohm load, suitable for amplifiers stable at 4-Ohm.
Rajah 2: Bersudut view of the Kicker CompQ12 Subwoofer, showing the robust construction.
Rajah 3: Depan view of the Kicker CompQ12 Subwoofer, highlighting the cone and surround.
The subwoofer features high-capacity, dual voice-coil push terminals designed to accommodate up to 8-gauge wire for secure and efficient current flow.
5. Operasi
Once properly installed and wired, the KICKER CompQ12 subwoofer is ready for operation. Ensure your amplifier settings (gain, crossover, bass boost) are correctly configured to prevent damage to the subwoofer and achieve desired sound quality.
- Continuous Power Handling (RMS): 850 Watt
- Respons Kekerapan: 20 – 100 Hz
- Impedans Dinilai: 2 Ohms (per voice coil)
Start with low volume levels and gradually increase, listening for any signs of distortion. Adjust amplifier settings as needed. The subwoofer is designed to handle significant power, but exceeding its RMS rating or driving it into audible distortion can cause damage.
6. Penyelenggaraan
The KICKER CompQ12 subwoofer requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Keep the subwoofer cone and surround free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the subwoofer to direct sunlight or extreme temperatures for extended periods.
- Periksa semua sambungan pendawaian secara berkala untuk memastikan ia kukuh dan bebas daripada kakisan.
- Do not apply any chemicals or solvents to the subwoofer's cone or surround.
7. Penyelesaian masalah
If you experience issues with your KICKER CompQ12 subwoofer, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Tiada bunyi daripada subwufer |
|
|
| Bass herot atau tidak jelas |
|
|
| Subwoofer cuts out intermittently |
|
|
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nama Model | 42CWQ122 |
| Jenis Pembesar Suara | Subwufer |
| Saiz Pembesar Suara | 12 Inci |
| Diameter Subwoofer | 12.5 Inci |
| Kedalaman Pemasangan | 7-1/8 inci (18.1 cm) |
| Pengendalian Kuasa Berterusan (RMS) | 850 Watt |
| Pengendalian Kuasa Puncak | 1700 Watt |
| Impedans Ternilai | 2 Ohms (Dual Voice Coil) |
| Respons Kekerapan | 20 – 100 Hz |
| Berat Barang | 29.7 paun (13.47 kg) |
| Dimensi Produk (Keseluruhan) | 13.78"D x 13.78"W x 11.81"H |
| Peranti Serasi | Car Stereo, MP3 Player, Laptop |
| Teknologi Ketersambungan | berwayar |
| Pengeluar | Penyepak |
| UPC | 713034073574 |
9. Waranti dan Sokongan
The KICKER CompQ12 Subwoofer comes with a Waranti Terhad. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official KICKER webtapak.
For technical support, troubleshooting assistance, or to inquire about service, please contact KICKER customer support or visit the official KICKER store online:
