KWANWA KW1028S Battery Operated Alarm Clock User Manual

1. Pengenalan

This manual provides detailed instructions for the setup, operation, and maintenance of your KWANWA KW1028S Battery Operated Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Kandungan Pakej

• KWANWA KW1028S Alarm Clock
• Manual Pengguna

Nota: 4 bateri AA diperlukan dan tidak termasuk dalam pakej.

3. Produk Lebihview

The KWANWA KW1028S is a battery-operated digital alarm clock featuring a large 1.4-inch red LED display for clear visibility. Its compact design makes it suitable for various environments, including bedrooms and offices.

Rajah 3.1: Depan view of the KWANWA KW1028S alarm clock, showcasing its large red LED display.

Figure 3.2: The KWANWA KW1028S alarm clock held in hand, illustrating its portable and compact dimensions.

4. Persediaan

4.1 Pemasangan Bateri

1. Cari petak bateri di bahagian belakang jam loceng.
2. Buka penutup petak bateri.
3. Insert 4 new AA batteries, ensuring correct polarity (+ and -).
4. Tutup penutup petak bateri dengan selamat.

The clock display will illuminate once batteries are correctly installed.

5. Arahan Operasi

The control buttons are located on the back panel of the clock. Refer to Figure 5.1 for button identification.

Rajah 5.1: Belakang view of the KWANWA KW1028S alarm clock with labeled control buttons.

5.1 Fungsi Butang

• TIME SET / DIM-: Press and hold to enter time setting mode. Short press to decrease value or dim display.
• AL SET / DIM+: Press and hold to enter alarm setting mode. Short press to increase value or brighten display.
• HOUR / 12/24: In setting mode, adjusts the hour. Outside setting mode, toggles between 12-hour and 24-hour format.
• MIN / AL ON/OFF: In setting mode, adjusts the minute. Outside setting mode, toggles alarm on/off.
• SNOOZE / AL STOP (Top button): Press to activate snooze during an alarm. Press and hold to stop the alarm.

5.2 Menetapkan Masa

1. Tekan dan tahan butang TIME SET / DIM- button for 2 seconds until the hour digits flash.
2. Tekan ke HOUR / 12/24 butang untuk menyesuaikan jam.
3. Tekan ke MIN / AL ON/OFF butang untuk menyesuaikan minit.
4. Tekan ke TIME SET / DIM- butang sekali lagi untuk mengesahkan dan keluar dari mod tetapan masa.

5.3 Menetapkan Penggera

1. Tekan dan tahan butang AL SET / DIM+ button for 2 seconds until the alarm hour digits flash.
2. Tekan ke HOUR / 12/24 butang untuk menyesuaikan jam penggera.
3. Tekan ke MIN / AL ON/OFF butang untuk menyesuaikan minit penggera.
4. Tekan ke AL SET / DIM+ butang sekali lagi untuk mengesahkan dan keluar dari mod tetapan penggera.

5.4 Menghidupkan/Mematikan Penggera

Tekan pendek MIN / AL ON/OFF button to toggle the alarm function on or off. An alarm icon will appear on the display when the alarm is active.

5.5 Fungsi Tunda

Apabila penggera berbunyi, tekan besar SNOOZE / AL STOP button on top of the clock to activate the snooze function. The alarm will temporarily stop and sound again after approximately 9 minutes.

5.6 Menghentikan Penggera

To stop the alarm completely, press and hold the SNOOZE / AL STOP button on top of the clock, or press any button on the back panel (except for snooze). The alarm will reset for the next day.

5.7 Melaraskan Kecerahan Paparan

Tekan dan tahan butang TIME SET / DIM- butang atau AL SET / DIM+ button for 2 seconds (outside of setting mode) to cycle through brightness levels (dimmer/brighter).

5.8 Format 12/24 Jam

Tekan pendek HOUR / 12/24 button (outside of setting mode) to switch between 12-hour (with AM/PM indicator) and 24-hour time formats.

5.9 Flashing Colon

To start or stop the flashing dots (colon) between the hour and minute digits, press and hold the MIN / AL ON/OFF butang selama 2 saat.

6. Penyelenggaraan

6.1 Pembersihan

Wipe the clock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish or display.

6.2 Penggantian Bateri

When the display becomes dim or the clock functions erratically, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. It is recommended to replace all 4 AA batteries simultaneously with new ones.

7. Penyelesaian masalah

• Paparan malap atau kosong:
  Ensure batteries are correctly installed and are not depleted. Replace with fresh AA batteries if necessary. Adjust brightness settings as per Section 5.7.
• Penggera tidak berbunyi:
  Verify that the alarm is turned on (check for the alarm icon on the display). Ensure the alarm time is set correctly.
• Masa tidak tepat:
  Replace batteries with fresh ones. If the issue persists, reset the time as per Section 5.2.
• Colon (dots) between numbers are not flashing:
  Refer to Section 5.9 to toggle the flashing colon feature.

8. Spesifikasi

9. Waranti dan Sokongan

KWANWA products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official KWANWA webtapak. Sila simpan bukti pembelian anda untuk tuntutan waranti.