Einhell TC-CD 18-2 Li Cordless Drill Instruction Manual

1. Pengenalan dan Selesai Produkview

The Einhell TC-CD 18-2 Li is a versatile cordless drill/screwdriver designed for a wide range of drilling and screwdriving applications in domestic, workshop, and garage environments. This tool offers convenience and efficiency without the need for a power cord.

Ciri-ciri utama termasuk:

• Ergonomic design with a soft grip for comfortable handling.
• 2-speed gearbox for powerful screwdriving and efficient drilling.
• Automatic spindle lock for quick and easy bit changes.
• Integrated bright LED light to illuminate the work area.
• Supplied with two 18V Lithium-Ion batteries, a charger, and a robust carrying case.

Figure 1: Einhell TC-CD 18-2 Li Cordless Drill with battery installed.

2. Arahan Keselamatan

Always observe the following safety precautions when operating the cordless drill/screwdriver to prevent electric shock, injury, and fire.

Amaran Keselamatan Alat Kuasa Am

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan seperti paip, radiator, julat dan peti sejuk. Terdapat peningkatan risiko kejutan elektrik jika badan anda dibumikan atau dibumikan.
• Keselamatan Diri: Sentiasa pakai pelindung mata. Gunakan peralatan keselamatan seperti topeng habuk, kasut keselamatan anti-gelincir, topi keras atau pelindung pendengaran apabila sesuai. Berpakaianlah dengan betul; jangan pakai pakaian atau barang kemas yang longgar. Jauhkan rambut, pakaian dan sarung tangan daripada bahagian yang bergerak.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Jangan gunakan alat kuasa jika suis tidak dapat menghidupkan dan mematikannya. Putuskan sambungan pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alat kuasa.
• Penggunaan dan Penjagaan Alat Bateri: Isi semula hanya dengan pengecas yang ditentukan oleh pengilang. Gunakan alatan kuasa hanya dengan pek bateri yang ditetapkan secara khusus. Apabila pek bateri tidak digunakan, jauhkan ia daripada objek logam lain.
• Perkhidmatan: Minta alat kuasa anda diservis oleh pembaikan bertauliah dengan hanya menggunakan alat ganti yang sama. Ini akan memastikan keselamatan alat kuasa dikekalkan.

3. Komponen Produk

Familiarize yourself with the parts of your Einhell TC-CD 18-2 Li cordless drill/screwdriver.

1. Chuck tanpa kunci
2. Cincin Tetapan Tork
3. Gear Selector Switch (2-speed)
4. Suis Putaran Hadapan/Undur
5. Trigger Switch (with electronic speed control)
6. Pemegang Grip Lembut
7. Lampu Kerja LED
8. Pek Bateri
9. Pengecas Bateri

Figure 2: Two 18V Lithium-Ion batteries and charger.

Figure 3: Ergonomic soft grip handle for comfortable operation.

4. Persediaan

4.1 Mengecas Bateri

Before first use, fully charge the battery pack. Connect the charger to a suitable power outlet. Insert the battery pack into the charger. The charging indicator lights on the charger will show the charging status. Once fully charged, disconnect the battery from the charger.

Figure 4: Typical charging time for a 1.5 Ah battery is 3-5 hours.

4.2 Memasang dan Menanggalkan Pek Bateri

• Pemasangan: Slide the charged battery pack into the base of the drill until it clicks securely into place.
• Pembuangan: Press the release button on the battery pack and slide it out from the drill.

4.3 Installing and Removing Drill/Screwdriver Bits

The drill features a keyless chuck for easy bit changes.

• Pemasangan: Rotate the chuck counter-clockwise until the jaws are open wide enough to insert the bit. Insert the bit fully and then rotate the chuck clockwise to tighten it securely. The automatic spindle lock assists in this process.
• Pembuangan: Putar chuck lawan arah jam untuk melonggarkan rahang dan menanggalkan mata gerudi.

5. Arahan Operasi

5.1 Pilihan Kelajuan

The drill has a 2-speed gearbox. Use the gear selector switch on top of the drill to choose between:

• Gear 1 (Kelajuan Rendah, Tork Tinggi): Ideal for screwdriving and drilling large diameters.
• Gear 2 (Kelajuan Tinggi, Tork Rendah): Suitable for drilling small diameters and faster work.

Figure 5: The drill features a 2-speed gearbox.

5.2 Tetapan Tork

The torque setting ring allows you to adjust the amount of torque applied before the clutch disengages. This prevents overtightening screws or damaging the workpiece.

• Select a lower setting for smaller screws and softer materials.
• Select a higher setting for larger screws and harder materials.
• Untuk penggerudian, tetapkan cincin kepada simbol gerudi untuk tork maksimum.

Figure 6: The drill provides up to 38 Nm of torque.

5.3 Putaran Hadapan/Undur

The forward/reverse switch located above the trigger controls the direction of rotation. Push the switch to the left for forward rotation (screwing in/drilling) and to the right for reverse rotation (unscrewing).

5.4 Trigger Switch and LED Work Light

Press the trigger switch to start the drill. The electronic speed control allows you to vary the speed by applying more or less pressure to the trigger. The integrated LED work light automatically illuminates the work area when the trigger is pressed, improving visibility in dimly lit spaces.

Figure 7: Electronic speed control for precise operation.

6. Penyelenggaraan

6.1 Pembersihan

Keep the ventilation slots of the drill clean to prevent overheating. Wipe the tool housing with a soft, damp cloth. Do not use abrasive cleaners or solvents. Regularly clean the chuck jaws to ensure proper gripping of bits.

6.2 Penjagaan dan Penyimpanan Bateri

• Simpan bateri di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• Do not store fully discharged batteries for extended periods. Charge them periodically.
• If the battery pack is not used for a long time, recharge it every 3-6 months.

6.3 Pemeriksaan Am

Periodically inspect the tool for any signs of damage, loose screws, or worn parts. If any damage is found, have the tool repaired by a qualified service technician before further use.

7. Penyelesaian masalah

8. Spesifikasi

Figure 8: The product includes two 18V Lithium-Ion batteries.

9. Waranti dan Sokongan

For warranty information and customer support, please refer to the official Einhell website or contact your local Einhell service center. Keep your purchase receipt as proof of purchase for any warranty claims.

Sokongan dalam talian: melawat www.einhell.com for product registration, FAQs, and service contact details.