1. Produk Lebihview
The Lux Pro Home Thermostat Model P711-010 is a versatile 7-day programmable thermostat designed for 1 heat and 1 cool stage HVAC systems. It offers flexible temperature control options, including 7-day, 5/2-day programming, or non-programmable settings. Key features include an easy-view backlight, keypad lock for security, and customizable display options for Fahrenheit or Celsius.
This thermostat is dual-powered, operating on 2 AA alkaline batteries (included) or a 24-volt system, ensuring reliable performance. It is designed for easy installation and intuitive operation, making it a convenient solution for managing your home's heating and cooling.
Rajah 1: Depan view of the Lux Pro P711 Thermostat, showing the display, fan and system mode switches, and control buttons.
Figure 2: Labeled diagram of the P711 control panel, indicating the LCD Display Screen, Fan Mode Switch, System Mode Switch, SET, NEXT, HOLD buttons, and UP and DOWN buttons.
2. Maklumat Keselamatan
Before installation or operation, please read all instructions carefully. Failure to follow these instructions could result in property damage or personal injury.
- Sentiasa matikan kuasa kepada sistem pemanasan/penyejukan pada fius utama atau panel pemutus litar sebelum memasang atau menservis termostat.
- Pastikan semua sambungan pendawaian selamat dan mematuhi kod elektrik tempatan.
- Do not short (jumper) across the electrical terminals on the thermostat base.
- Termostat ini direka bentuk untuk voltan rendahtage (24V) systems. Do not use with line voltage (120V/240V) systems.
- Keep batteries out of reach of children. Dispose of used batteries properly.
3. Pemasangan
3.1. Keserasian
The P711 thermostat is compatible with a variety of 24V heating and cooling systems. Refer to the compatibility chart below to ensure your system is supported.
Figure 3: System Compatibility Chart for the P711 Thermostat, detailing compatible and non-compatible HVAC systems.
3.2. Alat dan Bahan Yang Diperlukan
- Pemutar skru kepala Phillips
- Drill with 3/16” (4.8mm) drill bit (if new holes are needed)
- Pelucut wayar (jika perlu)
- Pensel
- Tahap (pilihan)
3.3. Langkah Pemasangan
- Matikan Kuasa: Locate the circuit breaker or fuse box that controls your heating and cooling system and turn off the power. Verify the power is off by attempting to turn on your system.
- Keluarkan Termostat Lama: Carefully remove the cover of your old thermostat. Take a picture of the wiring connections before disconnecting any wires. Label each wire with the terminal designation (e.g., R, G, Y, W, C) using the provided wire labels.
- Keluarkan Plat Pemasangan: Tanggalkan dan keluarkan plat pelekap termostat lama dari dinding.
- Pasang Pangkalan Termostat Baharu: Separate the front cover of the P711 thermostat from its base. Position the new thermostat base on the wall, feeding the wires through the opening. Mark the mounting holes with a pencil. If drilling new holes, use a 3/16” drill bit and insert the wall anchors. Secure the thermostat base to the wall using the provided screws.
- Dawaikan Termostat: Connect the labeled wires to the corresponding terminals on the P711 thermostat base. Refer to the wiring diagrams below for common configurations. Ensure connections are tight.
Figure 4: Wiring diagram for 3/4 wire conventional, non-heat pump, 1-stage cool only systems. Shows connections for C, G, RH, RC, W, Y, O/B terminals.
Figure 5: Wiring diagram for 4/5 wire conventional, non-heat pump, 1-stage haba dan 1-stage cool systems. Shows connections for C, G, RH, RC, W, Y, O/B terminals.
Figure 6: Wiring diagram for 5/6 wire conventional, non-heat pump, 1-heat / 1-cool systems with two transformers. Shows connections for C, G, RH, RC, W, Y, O/B terminals, and the removal of the factory RH-RC jumper wire.
- Masukkan Bateri: If using battery power, insert the 2 AA alkaline batteries into the battery compartment.
- Pasangkan Penutup Termostat: Carefully align the thermostat cover with the base and snap it into place.
- Pulihkan Kuasa: Return to the circuit breaker or fuse box and restore power to your heating and cooling system.
4. Persediaan dan Konfigurasi Awal
4.1. Menetapkan Masa dan Hari
Upon initial power-up or after a battery change, the display will show a flashing time and day. Use the SET button to navigate through the time and day settings, and the UP dan TURUN buttons to adjust the values. Press SETERUSNYA untuk mengesahkan setiap tetapan.
4.2. Mod Pengaturcaraan
The P711 offers three programming options: 7-day, 5/2-day, or non-programmable. You can select your preferred mode during the initial setup or by accessing the system settings. Refer to the detailed programming instructions in the full manual for specific steps on setting schedules for each day or period.
4.3. Display Options (Fahrenheit/Celsius)
You can switch between Fahrenheit (°F) and Celsius (°C) display modes. This setting is typically found within the advanced setup menu. Consult the full manual for instructions on accessing and changing this option.
4.4. Kunci Pad Kekunci
The keypad lock feature prevents unauthorized access or accidental changes to your thermostat settings. To activate or deactivate the keypad lock, follow the instructions provided in the comprehensive manual.
5. Operasi
5.1. Melaraskan Suhu
Dalam mod operasi biasa, gunakan UP or TURUN buttons to adjust the desired temperature setpoint. The new setpoint will be displayed, and the thermostat will adjust the system to reach it.
5.2. Fan Settings
The fan mode switch allows you to select between two settings:
- AUTO: Kipas hanya berfungsi apabila sistem pemanasan atau penyejukan beroperasi secara aktif. Ini adalah tetapan yang paling cekap tenaga.
- ON: Kipas berfungsi secara berterusan, tidak kira sama ada sistem pemanasan atau penyejukan aktif.
5.3. Mod Sistem
The system mode switch allows you to select the operating mode for your HVAC system:
- HABA: Termostat akan mengawal sistem pemanasan anda untuk mengekalkan suhu yang ditetapkan.
- MATI: Kedua-dua sistem pemanasan dan penyejukan dimatikan.
- KEREN: The thermostat will control your cooling system to maintain the set temperature.
5.4. Fungsi Tahan
The TAHAN button allows you to temporarily or permanently override the programmed schedule. When activated, the thermostat will maintain the current temperature setpoint until the HOLD function is canceled or a new schedule period begins (for temporary hold).
5.5. Penggantian Sementara
Melaraskan suhu menggunakan UP or TURUN buttons during a programmed period will initiate a temporary override. The thermostat will maintain this new temperature until the next scheduled program period begins.
6. Penyelenggaraan
6.1. Penggantian Bateri
The thermostat uses 2 AA alkaline batteries. When the battery indicator appears on the display, replace the batteries promptly to ensure continuous operation. Open the battery compartment, remove old batteries, and insert new ones, observing polarity (+/-). The thermostat has battery-free memory, so programming should not be lost during battery replacement.
6.2. Pembersihan
Bersihkan bahagian luar termostat dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan kemasan atau komponen dalaman.
7. Penyelesaian masalah
If you experience issues with your Lux Pro P711 thermostat, refer to the common troubleshooting steps below. For more complex problems, contact customer support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Paparan kosong atau malap | Low or dead batteries; No 24V power (if wired); Loose connections. | Replace batteries. Check circuit breaker for HVAC system. Verify wiring connections are secure. |
| System (Heat/Cool) does not turn on | System switch in OFF position; Incorrect wiring; Blown fuse in HVAC system; Temperature setpoint not calling for heat/cool. | Ensure system switch is set to HEAT or COOL. Recheck wiring against diagrams. Check HVAC system fuse. Adjust setpoint to be above (for heat) or below (for cool) current room temperature. |
| Kipas tidak beroperasi | Fan switch in AUTO; Incorrect wiring. | Set fan switch to ON to test continuous operation. Verify fan wiring (G terminal). |
| Bacaan suhu tidak tepat | Thermostat exposed to direct sunlight or drafts; Needs calibration. | Relocate thermostat if possible. Access user temperature calibration setting (refer to full manual). |
| Isu pengaturcaraan | Incorrect programming steps; Keypad locked. | Review programming instructions carefully. Unlock keypad if activated. |
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Jenama | LUX |
| Nama Model | P711-010 |
| Jenis Pengawal | Butang Tekan |
| Ciri Khas | Vol. Rendahtage |
| warna | putih |
| Jenis Kawalan Suhu | Manual, Boleh Diprogram |
| Teknologi Ketersambungan | N/A (Note: Product specifications list Wi-Fi, but this model is typically non-Wi-Fi. Refer to specific product packaging for confirmation.) |
| Komponen yang Disertakan | P711-010 Programmable 7 Day Thermostat, 2 AA LR6 batteries, 2 ST screws, 2 wall anchors, wire labels, instruction manual |
| Sumber Kuasa | Battery Powered (2 AA included), 24 Volts (system power) |
| Berat Barang | 1.6 auns |
| Voltage | 24 Volt |
| bahan | plastik |
| bentuk | segi empat tepat |
| Jenis Paparan | LCD dengan Lampu Latar |
| Jenis Kawalan | Kawalan Butang |
| Jenis Pemasangan | Lekap di dinding |
| Gaya | Programmable: 1 heat & 1 cool Stage |
| Lampu latar | ya |
| Pensijilan | UL (Underwriters Laboratories) Low Voltage Certification |
| Dimensi Produk | 1.25 x 3.38 x 5.38 inci |
| UPC | 021079147113 |
9. Waranti dan Sokongan
9.1. Maklumat Waranti
The Lux Pro P711 Thermostat typically comes with a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
9.2. Sokongan Pelanggan
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact LUX customer support. Refer to the contact information provided on the product packaging or the official LUX webtapak (www.luxproducts.com) for the most up-to-date support options.
