Legrand 138074 Manual Call Point Instruction Manual

1. Produk Lebihview

The Legrand 138074 is a manual call point designed for fire alarm systems. It features a white housing, two contacts, and an integrated LED indicator. This device allows for manual activation of a fire alarm in emergency situations, providing a clear visual and tactile indication of activation.

Rajah 1: Depan view of the Legrand 138074 Manual Call Point.

2. Maklumat Keselamatan

Sila baca dan fahami semua arahan keselamatan sebelum memasang atau mengendalikan peranti ini. Kegagalan mematuhi arahan ini boleh mengakibatkan kerosakan harta benda, kecederaan atau kematian.

• Pemasangan Profesional: Installation must be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
• Pemutusan Kuasa: Always disconnect power to the circuit before performing any installation, maintenance, or troubleshooting.
• Voltage Semak: Sahkan bahawa bekalan kuasa voltage sepadan dengan spesifikasi peranti.
• Keadaan Persekitaran: Do not install in areas with excessive moisture, extreme temperatures, or corrosive environments.
• Integriti Komponen: Jangan gunakan peranti jika ada bahagian yang rosak.

3. Kandungan Pakej

Sahkan bahawa semua komponen ada dan tidak rosak semasa membuka bungkusan:

• Legrand 138074 Manual Call Point (1 unit)
• Mounting Screws (quantity as supplied)
• Manual Arahan (dokumen ini)

4. Persediaan dan Pemasangan

The Legrand 138074 Manual Call Point is designed for surface or flush mounting. Ensure the chosen location complies with local fire safety regulations regarding accessibility and visibility.

4.1. Pemasangan

1. Sediakan Permukaan Pemasangan: Ensure the surface is clean, dry, and flat.
2. Tandakan Titik Penggerudian: Use the call point's base as a template to mark the positions for mounting screws.
3. Lubang gerudi: Drill pilot holes appropriate for the mounting screws.
4. Selamatkan Pangkalan: Attach the call point's base securely to the wall using the provided screws.

4.2. Pendawaian

Refer to the wiring diagram below and your fire alarm control panel's documentation for correct connection. This device features 2 contacts and an LED indicator.

• Connect the alarm circuit wires to the designated terminals (typically NO/NC contacts).
• Connect the LED indicator wires to the appropriate power source and signaling circuit as per your system's requirements.
• Pastikan semua sambungan selamat dan terlindung dengan betul.

Gambar 2: Dalaman view and wiring terminals of the Legrand 138074 Manual Call Point.

4.3. Perhimpunan Akhir

1. Carefully place the front cover onto the mounted base, ensuring all wires are tucked away and not pinched.
2. Secure the cover with any retaining screws or clips provided.
3. Restore power to the circuit and test the device according to your fire alarm system's testing procedures.

5. Arahan Operasi

In the event of a fire or other emergency requiring immediate alarm activation:

1. Locate the Call Point: Identify the nearest Legrand 138074 Manual Call Point.
2. Aktifkan Penggera: Firmly press the designated activation area on the call point. This action will typically break a frangible element or activate a switch.
3. Verify Activation: The integrated LED indicator should illuminate, confirming that the call point has been activated and the signal sent to the fire alarm control panel.
4. Pindahkan: Follow your building's emergency evacuation procedures.

Note: Resetting the call point typically requires a special key or tool to return the activation mechanism to its original state after an alarm. Consult your fire alarm system administrator for reset procedures.

6. Penyelenggaraan

Regular maintenance ensures the reliable operation of your manual call point.

• Pemeriksaan Visual: Periodically inspect the call point for any signs of physical damage, tampering, or obstruction. Ensure the LED is functional during system tests.
• Pembersihan: Clean the exterior of the call point with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Ujian Fungsian: Conduct regular functional tests as required by local fire safety regulations and your fire alarm system's maintenance schedule. This should be performed by qualified personnel.
• Penggantian Komponen: If the frangible element is broken or the device is damaged, it must be replaced by a qualified technician.

7. Penyelesaian masalah

If you encounter issues with your Legrand 138074 Manual Call Point, refer to the table below. For problems not listed, contact qualified service personnel.

8. Spesifikasi

9. Maklumat Waranti

Legrand products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please retain your proof of purchase. For detailed warranty information, refer to the official Legrand website or contact Legrand customer support in your region.

10. Sokongan dan Hubungan

For technical assistance, product inquiries, or to report issues, please contact Legrand customer support. You can find contact information, including phone numbers and online support portals, on the official Legrand webtapak:

www.legrand.com

When contacting support, please have your product model number (138074) and any relevant purchase details ready.