1. Pengenalan
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Pedrollo 2CP Twin Impeller Electric Water Pump, model 2CPm25/16C. Designed for high efficiency and adaptability, this pump is ideal for various applications including domestic, civil, and industrial water supply systems, pressure boosting, and fire-fighting sets. It is suitable for use with clean water and liquids that are not chemically aggressive to the pump's materials.
Sila baca manual ini dengan teliti sebelum pemasangan dan pengendalian untuk memastikan penggunaan yang betul dan untuk mengelakkan kerosakan atau kecederaan.
2. Maklumat Keselamatan
AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan renjatan elektrik, kebakaran, kecederaan serius atau kematian.
- Always disconnect the pump from the power supply before performing any installation, maintenance, or repair work.
- Ensure the electrical installation complies with all local and national electrical codes. The pump requires a single-phase 230V 50Hz power supply.
- The pump must be installed in a closed environment or adequately protected from adverse weather conditions (rain, direct sunlight, frost).
- Do not operate the pump with liquids outside the specified temperature range (-10°C to +90°C).
- Ensure the ambient temperature remains within -10°C to +40°C during operation.
- Never run the pump dry. Dry running can cause severe damage to the pump.
- Jauhkan kanak-kanak dan kakitangan yang tidak dibenarkan daripada pam semasa operasi.
- Jangan melebihi tekanan kerja maksimum 10 bar.
3. Produk Lebihview
The Pedrollo 2CPm25/16C is a twin-impeller centrifugal pump designed for efficient water handling. Below is an image illustrating the key components of the pump.
Rajah 1: Pedrollo 2CP Twin Impeller Electric Water Pump. This image shows the robust blue cast iron pump body with its distinctive twin-impeller design on the left, featuring the aspiration port. To the right, the electric motor housing is visible with cooling fins and the electrical connection box on top. The pump is mounted on a stable base.
Komponen Utama:
- Badan Pam: Constructed from durable Cast Iron.
- Pendesak: Made of Brass, designed for efficient water movement.
- Motor: Electric motor providing 1.5 Hp (1.1 kW) power.
- Aspiration Port: 1¼" inlet for water intake.
- Pelabuhan Keluar: 1" outlet for water discharge.
- Electrical Connection Box: For secure power wiring.
4. Persediaan dan Pemasangan
Pemasangan yang betul adalah penting untuk prestasi dan jangka hayat pam.
4.1 Lokasi
- Install the pump in a dry, well-ventilated area.
- The location must be protected from frost, direct sunlight, and excessive humidity.
- Ensure sufficient space around the pump for ventilation and future maintenance.
- Mount the pump on a solid, level surface to minimize vibration.
4.2 Sambungan Paip
- Connect the suction pipe to the 1¼" aspiration port and the discharge pipe to the 1" outlet port.
- Use appropriate fittings and sealants to ensure all connections are airtight and watertight.
- Install a foot valve with a strainer at the end of the suction pipe if drawing water from a well or tank to prevent debris from entering the pump and to maintain prime.
- Pertimbangkan untuk memasang injap pengasingan pada kedua-dua talian sedutan dan pelepasan untuk penyelenggaraan yang lebih mudah.
4.3 Sambungan Elektrik
- The pump requires a single-phase 230V, 50Hz power supply.
- All electrical wiring must be performed by a qualified electrician and comply with local regulations.
- Ensure the power cable is adequately sized for the pump's power requirements (1.1 kW / 1.5 Hp).
- Connect the pump to a dedicated circuit protected by a residual current device (RCD) for safety.
- Sahkan bahawa voltage and frequency of the power supply match the pump's specifications.
4.4 Penyebuan Pam
Before initial startup, the pump must be primed to ensure it is filled with water and can create suction.
- Tutup injap pelepasan.
- Tanggalkan palam priming (biasanya terletak di bahagian atas pam)asing).
- Perlahan-lahan isi pam casing with clean water until it overflows from the priming hole.
- Replace and tighten the priming plug.
- Open the discharge valve before starting the pump.
5. Arahan Operasi
Setelah dipasang dan disepadukan, pam sedia untuk digunakan.
5.1 Permulaan Awal
- Pastikan semua sambungan selamat dan tiada kebocoran.
- Verify the pump is properly primed.
- Turn on the power supply to the pump. The pump should start immediately.
- Monitor the pump for any unusual noises or vibrations during the first few minutes of operation.
- Check for consistent water flow and pressure.
5.2 Operasi Biasa
- The pump is designed for continuous service (S1), meaning it can operate continuously without interruption under normal conditions.
- Avoid running the pump dry, as this can cause severe damage to the mechanical seal and impellers.
- Regularly check the pressure gauges (if installed) to ensure the pump is operating within its specified head and flow rate.
5.3 Mematikan
- To stop the pump, simply turn off the power supply.
- For extended periods of non-use, especially in freezing temperatures, drain the pump completely to prevent damage from ice expansion.
6. Penyelenggaraan
Penyelenggaraan yang kerap memastikan jangka hayat dan prestasi optimum pam anda.
6.1 Pemeriksaan Rutin
- Harian: Check for any visible leaks around connections or the pump body. Listen for unusual noises.
- Mingguan/Bulanan: Inspect the electrical connections for signs of wear or corrosion. Ensure the pump's ventilation fins are clear of debris.
- Setiap tahun: Have a qualified technician inspect the pump's internal components, including impellers and mechanical seals, for wear.
6.2 Pembersihan
- Keep the exterior of the pump clean and free of dust and dirt to ensure proper heat dissipation from the motor.
- If a strainer is used on the suction line, clean it regularly to prevent clogging and maintain flow.
6.3 Winterization (for non-continuous use in cold climates)
- Putuskan sambungan kuasa ke pam.
- Drain all water from the pump casing and piping to prevent freezing damage. This can be done by opening drain plugs (if present) or disconnecting pipes.
- Store the pump in a dry, frost-free environment if it is to be removed from service for the winter.
7. Penyelesaian masalah
Bahagian ini menyediakan penyelesaian kepada isu biasa yang mungkin anda hadapi.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pam tidak bermula | Tiada bekalan kuasa Motor terlebih muatan Seized impeller | Check power connection, circuit breaker/fuse Reset thermal overload protector; check for blockages Hubungi juruteknik bertauliah |
| Pam berjalan tetapi tiada aliran air | Pam tidak diisi Kebocoran udara dalam talian sedutan Clogged suction strainer/pipe Low water level at source | Hidupkan semula pam Check all suction connections for leaks Clean strainer and check pipe for obstructions Memastikan bekalan air mencukupi |
| Aliran atau tekanan rendah | Partial clog Udara dalam sistem Worn impeller/components Incorrect pipe sizing | Check for partial blockages in pipes or pump Bleed air from the system; check for suction leaks Contact qualified technician for inspection Consult plumbing professional |
| Bunyi atau getaran yang berlebihan | Peronggaan (udara dalam pam) Pemasangan longgar memakai galas Serpihan dalam pam | Ensure pump is fully primed and no air leaks Ketatkan bolt pemasangan Hubungi juruteknik bertauliah Disconnect power and inspect pump interior (if safe to do so) |
If you are unable to resolve the issue using this guide, please contact a qualified technician or Pedrollo customer support.
8. Spesifikasi
Detailed technical specifications for the Pedrollo 2CPm25/16C pump.
| Parameter | Nilai |
|---|---|
| Model | 2CPm 25/16C |
| Bekalan Kuasa | Single phase 230V 50Hz |
| Kuasa (kW) | 1.1 kW |
| Power (Hp) | 1.5 Hp |
| Flow Rate (Q L/min) | 20 ÷ 120 L/min |
| Head (H Metres) | 46 ÷ 24 Metres |
| Aspiration Port Size | 1¼" |
| Saiz Port Outlet | 1" |
| Bahan Badan Pam | Besi tuang |
| Bahan Pendesak | Tembaga |
| Julat Suhu Cecair | -10°C hingga +90°C |
| Julat Suhu Ambien | -10°C hingga +40°C |
| Manometric Suction Lift (max) | 7 m |
| Maks. Tekanan Kerja | 10 bar |
| Perkhidmatan Berterusan | S1 |
| Berat Barang | 15 kg |
| Pengeluar | Pedrollo |
| Sumber Kuasa | Elektrik dengan kord |
9. Waranti dan Sokongan
For warranty information, please refer to the documentation provided at the time of purchase or contact your authorized Pedrollo dealer or the manufacturer directly. Pedrollo products are known for their quality and reliability, and specific warranty terms may vary by region and seller.
For technical support, spare parts, or service, please contact your local Pedrollo distributor or the seller from whom you purchased the pump. Ensure you have your pump's model number (2CPm25/16C) and serial number (if applicable) ready when contacting support.
You can find more information and contact details on the official Pedrollo webtapak: www.pedrollo.com
