1. Pengenalan
Thank you for choosing the BarcaLounger Shiatsu Massage Office Chair. This manual provides essential information for the safe and efficient use, assembly, operation, and maintenance of your new office chair. Please read this manual thoroughly before assembly and use, and retain it for future reference.
This chair is designed to provide comfort and support for office use, featuring an integrated Shiatsu massage function to enhance your seating experience.
2. Arahan Keselamatan Penting
- Read all instructions before using this chair.
- Do not use this chair near water or in excessively humid environments.
- Ensure all connections are secure before sitting on the chair.
- Keep children and pets away from the chair during operation and assembly.
- Jangan berdiri di atas kerusi atau gunakannya sebagai bangku tangga.
- Cabut plag kerusi dari salur keluar kuasa apabila tidak digunakan atau sebelum dibersihkan.
- If the power cord or plug is damaged, do not use the chair. Contact customer support for assistance.
- Do not attempt to repair or modify the chair yourself. Refer all servicing to qualified personnel.
- Avoid prolonged exposure to direct sunlight or extreme temperatures, which can damage the upholstery.
3. Kandungan Pakej
Please check the package carefully to ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Backrest
- Kusyen Tempat Duduk
- Tempat letak tangan (2)
- Pangkalan kerusi
- Kastor (5)
- Silinder Angkat Gas
- Plat Mekanisme
- Pek Perkakasan (skru, pencuci, sepana Allen)
- Power Adapter for Massage Function
- Manual Pengguna (dokumen ini)
4. Arahan Perhimpunan
Before beginning assembly, ensure you have enough space and all parts are accounted for. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Pasang Kastor ke Pangkalan: Masukkan lima roda ke dalam lubang di hujung setiap kaki tapak kerusi. Tolak dengan kuat sehingga ia klik pada tempatnya.
- Masukkan Pengangkat Gas: Letakkan silinder pengangkat gas ke dalam lubang tengah tapak kerusi.
- Pasangkan Plat Mekanisme: Pasangkan plat mekanisme pada bahagian bawah kusyen tempat duduk menggunakan skru yang disediakan. Pastikan bahagian hadapan mekanisme menghadap bahagian hadapan tempat duduk.
- Pasang tempat letak tangan: Fasten the armrests to the seat cushion using the designated screws. Do not overtighten.
- Sambung Sandaran: Align the backrest with the seat cushion and armrests, then secure it with the remaining screws.
- Letakkan Tempat Duduk di atas Lif Gas: Letakkan tempat duduk dan penyandar yang telah dipasang dengan berhati-hati pada silinder pengangkat gas, pastikan ia berada di tengah dan stabil.
- Sambungkan Kuasa: Locate the power input for the massage function, typically on the underside of the seat. Connect the power adapter and plug it into a standard electrical outlet.

Image 1: Fully assembled BarcaLounger Shiatsu Massage Office Chair. The chair features a high back, padded armrests, and a five-star base with casters. The brown faux leather upholstery is visible.
5. Arahan Operasi
5.1 Pelarasan Kerusi
- Pelarasan Ketinggian: To raise the chair, lift the lever located under the right side of the seat while standing. To lower the chair, lift the lever while seated.
- Kunci/Buka Kunci Condong: Pull the same lever outwards to unlock the tilt function, allowing the chair to recline. Push the lever inwards to lock the chair in an upright position.
- Ketegangan Condongkan: Rotate the round knob located under the front of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (harder to recline), counter-clockwise to decrease tension (easier to recline).
5.2 Shiatsu Massage Function
The chair features an integrated Shiatsu massage system. Ensure the chair is plugged into a power outlet before use.
- Hidupkan/Mati Kuasa: Locate the control panel or remote, typically attached to the side of the chair. Press the "Power" button to activate the massage function.
- Mod Urut: Select from available massage modes (e.g., Shiatsu, Rolling, Kneading) using the corresponding buttons on the control panel.
- Pelarasan Intensiti: Adjust the massage intensity (if available) using the "+" and "-" buttons.
- Kawasan Sasaran: Some models allow you to select specific massage areas (e.g., upper back, lower back).
- Fungsi Haba: If equipped, press the "Heat" button to activate soothing heat in the lumbar area.
- Matikan automatik: The massage function may have an automatic shut-off timer for safety and energy saving.
Nota: If the massage rollers feel too prominent when the massage function is off, consider placing a thin cushion or blanket over the backrest for added comfort during non-massage use.
6. Penyelenggaraan dan Penjagaan
6.1 Cleaning the Upholstery (Faux Leather)
- Pembersihan tetap: Lap permukaan kulit tiruan dengan lembut, damp cloth to remove dust and light dirt.
- Pembersihan Tempat: For spills, immediately blot with a clean, dry cloth. For stubborn stains, use a mild soap solution (e.g., diluted dish soap) on a soft cloth, then wipe with a clean, damp kain dan keringkan dengan teliti.
- Elakkan Bahan Kimia Keras: Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the faux leather.
- Pengeringan: Allow the chair to air dry completely after cleaning. Do not use heat.
6.2 Penyelenggaraan Am
- Periksa Pengikat: Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
- Penjagaan Kastor: Clean casters regularly to remove hair and debris that can impede movement.
- Kord Kuasa: Inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
- Storan: Jika menyimpan kerusi untuk tempoh yang lama, simpan di tempat yang sejuk dan kering jauh dari cahaya matahari langsung.
7. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Kerusi tidak boleh melaraskan ketinggian. | Gas lift cylinder is faulty or lever is not engaged correctly. | Ensure the lever is fully pulled. If problem persists, the gas lift may need replacement. |
| Kerusi bergoyang atau tidak stabil. | Skru longgar atau pemasangan yang tidak betul. | Check and tighten all assembly screws. Ensure casters are fully inserted into the base. |
| Massage function does not work. | Not plugged in, power adapter faulty, or control panel issue. | Verify the power adapter is securely plugged into both the chair and a working electrical outlet. Check for any visible damage to the cord. Try a different outlet. |
| Massage rollers feel uncomfortable when off. | Design characteristic of the massage mechanism. | Place a thin cushion or blanket over the backrest for additional padding when the massage function is not in use. |
| Upholstery is peeling or cracking. | Wear and tear, or material defect. | Contact customer support if within warranty period. |
If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact customer support for further assistance.
8. Spesifikasi Produk
- Jenama: BarcaLounger
- model: Shiatsu Massage Office Chair
- warna: coklat
- Bahan: Kulit Tiruan
- Ciri Khas: Cushion Availability, Shiatsu Massage Function
- Penggunaan yang Disyorkan: Pejabat
- Jenis Bilik: Pejabat
- Faktor Bentuk: Recliner (Office Chair)
- Bilangan Unit: 1.0 Kiraan
- ASIN: B01868TXLE
- Tarikh Mula-mula Tersedia: 21 Disember 2015
9. Waranti dan Sokongan Pelanggan
BarcaLounger products are manufactured to high-quality standards. For specific warranty information regarding your Shiatsu Massage Office Chair, please refer to the warranty card included with your purchase or visit the official BarcaLounger webtapak.
If you have any questions, require technical assistance, or need to report a missing or damaged part, please contact BarcaLounger customer support. Contact details can typically be found on the manufacturer's webtapak atau pada dokumentasi pembelian anda.
Please have your model number (Shiatsu Massage Office Chair) and ASIN (B01868TXLE) ready when contacting support.





