Manual Pengguna Lampu Kanopi LED RAB VANLED20 20W

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB VANLED20 20W LED Canopy Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for commercial lighting applications, offering high efficiency and durability.

Image 1.1: The RAB VANLED20 20W LED Canopy Light Fixture. This image shows the compact, low-profile design of the white LED canopy light, suitable for various commercial installations.

2. Maklumat Keselamatan

AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum pemasangan atau servis.

• Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut semua kod elektrik nasional dan tempatan.
• Pastikan bekalan voltage is correct (120V-277V AC).
• Jangan kendalikan komponen hidup.
• Pakai peralatan pelindung diri (PPE) yang sesuai semasa pemasangan.
• Lekapan ini sesuai untuk lokasi basah.
• Jangan ubah suai lekapan. Sebarang pengubahsuaian boleh membatalkan jaminan dan menimbulkan bahaya keselamatan.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• RAB VANLED20 20W LED Canopy Light Fixture (1)
• Mounting Hardware (Screws, Gaskets, etc.)
• Panduan Pemasangan (Dokumen ini)

4. Persediaan dan Pemasangan

The VANLED20 is designed for ceiling mount installation to a recessed junction box or directly to the ceiling surface. It features side conduit entry points for flexible wiring.

1. Sediakan Tapak Pemasangan:
   • Matikan kuasa pada pemutus litar.
   • Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 10.76 lbs).
2. Pilihan Pemasangan:
   • Recessed Junction Box: Use the provided knockout template to align and secure the fixture to the junction box.
   • Direct Ceiling Surface: Utilize the side conduit entry points for wiring. Secure the fixture directly to the ceiling using appropriate mounting hardware (not always included, check package contents).
3. Pendawaian:
   • Connect the fixture's wires to the building's electrical supply wires according to local electrical codes.
   • Pastikan pembumian yang betul.
   • The fixture supports 120V-277V AC input.
   • Seal all conduit entries and the rear wire plug with weatherproof sealant to maintain the IP66 rating.
4. Secure the Lens:
   • Ensure the vandal-resistant polycarbonate textured opaque drop lens is securely fastened to the die-cast aluminum housing.
5. Pulihkan Kuasa:
   • Setelah pemasangan selesai dan semua sambungan selamat, pulihkan kuasa pada pemutus litar.

5. Arahan Operasi

The RAB VANLED20 is an automatic LED light fixture. Once properly installed and powered, it will illuminate. It does not feature manual on/off switches on the unit itself. Control is typically managed via the building's electrical circuit or an external remote control system, if integrated.

• Hidupkan kuasa: Ensure the circuit breaker supplying power to the fixture is in the "ON" position.
• Kawalan Jauh (Pilihan): If your installation includes a compatible remote control system, refer to the instructions provided with that system for operation. The fixture itself supports remote control functionality.
• Output Cahaya: The 20W LED provides cool 5000K illumination.

6. Penyelenggaraan

The RAB VANLED20 LED Canopy Light Fixture is designed for minimal maintenance, offering a long operational life of up to 100,000 hours.

• Pembersihan: Periodically clean the exterior of the fixture and lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
• Pemeriksaan: Annually inspect the fixture for any signs of damage, loose connections, or wear. Pay attention to the integrity of the housing and lens.
• LED: The integrated LED array is not user-serviceable. If the LEDs fail, the entire fixture typically requires replacement.

7. Penyelesaian masalah

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support or a qualified electrician.

8. Spesifikasi

• model: VANLED20W
• Wattage: 20W
• Sumber Cahaya: LED
• Suhu Warna: 5000K (Putih Sejuk)
• Input Voltage: 120V-277V AC
• Jangka hayat: 100,000 Jam
• Bahan: Die-cast Aluminum Housing, Polycarbonate Lens
• Peringkat Perlindungan Ingress (IP): IP66 (Kedap habuk dan dilindungi daripada pancutan air yang kuat)
• Penyenaraian UL: Sesuai untuk lokasi basah
• Pemasangan: Ceiling mount (recessed junction or direct surface)
• Berat: Kira-kira 10.76 paun (4.88 kg)
• Kaedah Kawalan: Remote (via external system) / Push Button (via external system)
• UPC: 019813266299

9. Maklumat Waranti

RAB Lighting products are backed by a comprehensive warranty. For specific warranty terms and conditions applicable to the VANLED20W fixture, please refer to the official RAB Lighting webtapak atau hubungi sokongan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

Note: The provided product data mentions optional protection plans (e.g., 4-Year Protection Plan). These are typically third-party plans and separate from the manufacturer's standard warranty.

10. Sokongan Pelanggan

For technical assistance, replacement parts, or further information regarding your RAB VANLED20 20W LED Canopy Light Fixture, please contact RAB Lighting directly:

• Webtapak: www.rablighting.com
• telefon: Refer to the RAB Lighting webtapak untuk nombor hubungan semasa.
• e-mel: Refer to the RAB Lighting website for current contact email addresses.

When contacting support, please have your model number (VANLED20W) and purchase date available.