Manual Arahan Casing Komputer Zalman Z1 Neo

1. Pengenalan

Terima kasih kerana membeliasing the Zalman Z1 Neo Midi Tower Computer Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before installation to ensure correct assembly and optimal performance.

The Zalman Z1 Neo is a midi tower computer case designed for optimal airflow and user convenience. It features a transparent acrylic side panel, a black exterior, and supports up to three system fans for efficient cooling. The internal structure provides ample space for components, including high-performance graphics cards and CPU coolers, with tool-free installation for HDDs/ODDs.

Figure 1: Zalman Z1 Neo Computer Case Overview

This image shows the Zalman Z1 Neo computer case from a front-left angle, highlighting its black finish, transparent acrylic side panel, and the blue LED illumination from the front fans.

2. Maklumat Keselamatan

• Sentiasa putuskan sambungan bekalan kuasa daripada soket dinding sebelum memasang atau menanggalkan sebarang komponen.
• Handle components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Keep the case away from water, moisture, and direct sunlight.
• Pastikan pengudaraan yang betul di sekitar bekas untuk mengelakkan terlalu panas.
• Do not attempt to open or repair the case if you are not qualified. Refer to qualified service personnel.

3. Kandungan Pakej

Sila semak kandungan pakej anda. Jika ada barang yang hilang atau rosak, hubungi peruncit anda.

• Zalman Z1 Neo Computer Case
• Accessory Kit (screws, standoffs, cable ties, user manual)

4. Ciri-ciri Produk

• Aliran Udara Dioptimumkan: Designed for efficient cooling with support for multiple system fans.
• Transparent Acrylic Side Panel: Allows visibility of internal components.
• Penapis Habuk: Installed to prevent dust accumulation, particularly at the bottom intake.
• High Performance Graphics Card Support: Accommodates graphics cards up to 375mm in length.
• Antara Muka Mesra Pengguna: Convenient front panel I/O ports including USB 2.0 and USB 3.0.
• Pemasangan Tanpa Alat: Simplifies the installation of HDDs and ODDs.
• CPU Cooler Mounting Hole: Facilitates easy installation and removal of CPU coolers.

Figure 2: Transparent Acrylic Side Panel

This image illustrates the transparent acrylic side panel of the Zalman Z1 Neo, providing a clear view of the installed motherboard, CPU cooler, and graphics card.

Figure 3: Dust Filter Location

The image highlights the removable dust filter located at the bottom of the Zalman Z1 Neo case, designed to prevent dust from entering the system.

Figure 4: Front Panel I/O Ports

This image details the front panel connectivity of the Zalman Z1 Neo, showing the Power button, Mic/Headphone jacks, USB 2.0 ports, USB 3.0 ports, and the Reset button.

5. Persediaan dan Pemasangan

5.1 Senarai Semak Pra-Pemasangan

• Ensure you have all necessary components (motherboard, CPU, RAM, GPU, PSU, storage drives).
• Sediakan ruang kerja yang bersih dan terang.
• Gather essential tools: Phillips head screwdriver, cable ties (some included in accessory kit).
• Review your motherboard and component manuals for specific installation instructions.

5.2 Membuka Kes

1. Letakkan bekas di atas permukaan yang rata dan stabil.
2. Unscrew the thumbscrews on the rear of the left side panel (transparent acrylic panel).
3. Gently slide the side panel backward and lift it off.
4. Repeat for the right side panel if necessary for cable management.

5.3 Pemasangan Motherboard

1. Pasangkan pelindung I/O ke dalam bukaan belakang bekas.
2. Ensure the motherboard standoffs are correctly aligned with your motherboard's screw holes. Install additional standoffs from the accessory kit if needed.
3. Carefully place the motherboard onto the standoffs, aligning it with the I/O shield.
4. Secure the motherboard with screws provided in the accessory kit. Do not overtighten.

5.4 Pemasangan Unit Bekalan Kuasa (PSU)

1. Position the PSU at the bottom rear of the case, ensuring the fan faces downwards (if the case has a bottom vent) or upwards.
2. Pasangkan PSU pada bekas menggunakan skru yang disediakan bersama bekalan kuasa anda.

5.5 Pemasangan Pemacu Storan (HDD/SSD)

The Z1 Neo supports tool-free installation for some drive bays.

1. For 3.5" HDDs: Slide the drive into the designated tool-free bay until it clicks into place.
2. For 2.5" SSDs/HDDs: Secure the drive to the appropriate bracket or bay using screws.
3. Connect SATA data and power cables to each drive.

5.6 Expansion Card Installation (Graphics Card)

Sarung ini menyokong kad grafik sehingga 375mm panjang.

Figure 5: Graphics Card Installation Space

Imej ini menyediakan dalaman view of the Zalman Z1 Neo, illustrating the ample space available for installing a high-performance graphics card, with a measurement indicating support for cards up to 360mm (the case supports up to 375mm).

1. Tanggalkan penutup slot PCI-E yang diperlukan dari belakang sarung.
2. Carefully insert the expansion card into the corresponding PCI-E slot on the motherboard.
3. Lindungi kad dengan skru atau klip penahan yang disediakan.
4. Connect any required power cables from the PSU to the graphics card.

5.7 Cooling Fan Installation

The Z1 Neo supports up to three system fans for enhanced cooling.

• Identify fan mounting locations (front, rear, top).
• Secure fans using fan screws.
• Connect fan power cables to the motherboard fan headers or a fan controller.

5.8 Sambungan Panel Hadapan

Connect the front panel cables from the case to the corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

• USB 2.0/3.0: Connect the USB cables to the motherboard's USB headers.
• Audio HD: Connect the audio cable to the motherboard's HD Audio header.
• Power SW / Reset SW / HDD LED / Power LED: Connect these small connectors to the front panel header pins on your motherboard. Pay attention to polarity for LEDs.

5.9 Pengurusan Kabel

Utilize the space behind the motherboard tray and the included cable ties to route and secure cables. Good cable management improves airflow and aesthetics.

6. Arahan Operasi

6.1 Menghidupkan/Mematikan

• After all components are installed and cables connected, close the side panels.
• Sambungkan kabel kuasa ke PSU dan soket dinding.
• Pusingkan suis kuasa pada PSU ke kedudukan 'ON'.
• Press the Power button on the front panel of the case to start your computer.
• To shut down, use the operating system's shutdown function or press and hold the Power button for a few seconds.

7. Penyelenggaraan

7.1 Pembersihan Penapis Habuk

Regular cleaning of dust filters is crucial for maintaining optimal airflow and preventing dust buildup inside the case.

1. Matikan komputer anda dan putuskan sambungannya daripada sumber kuasa.
2. Locate the dust filters (e.g., at the bottom intake).
3. Keluarkan penapis dengan berhati-hati.
4. Bersihkan penapis menggunakan udara termampat, berus lembut atau dengan membilasnya dengan air (pastikan ia benar-benar kering sebelum dipasang semula).
5. Reinstall the dust filters.

7.2 General Case Cleaning

• Gunakan yang lembut, damp cloth to wipe down the exterior surfaces of the case. Avoid harsh chemicals.
• For the transparent acrylic side panel, use a microfiber cloth and a mild cleaner specifically designed for plastics to avoid scratches.
• Periodically use compressed air to clear dust from internal components and fan blades.

8. Penyelesaian masalah

If you encounter issues, refer to the following common troubleshooting steps. For more complex problems, consult your component manuals or a qualified technician.

• Tiada Kuasa:
  • Ensure the PSU is properly connected to the wall outlet and the PSU switch is ON.
  • Sahkan semua kabel kuasa (ATX 24-pin, CPU 8-pin, kuasa GPU) disambungkan dengan selamat ke papan induk dan komponen.
  • Check the front panel Power Switch connection to the motherboard.
• Peminat Tidak Berputar:
  • Confirm fan power cables are correctly connected to motherboard headers or a fan controller.
  • Semak tetapan BIOS/UEFI untuk kawalan kelajuan kipas.
• Panel Depan USB/Audio Tidak Berfungsi:
  • Ensure the USB and HD Audio cables from the front panel are securely connected to the correct headers on the motherboard.
  • Periksa pemacu motherboard.
• Sistem Terlalu Panas:
  • Verify all case fans are operating correctly and oriented for optimal airflow.
  • Bersihkan penapis habuk dan komponen dalaman.
  • Ensure CPU cooler and GPU fans are functioning.

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information and technical support, please refer to the official Zalman webtapak atau hubungi peruncit tempatan anda. Simpan bukti pembelian anda untuk tuntutan waranti.

Zalman Official Webtapak: www.zalman.com