pengenalan
Terima kasih kerana membeliasing the MVMT Hive Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
Kandungan Pakej
Pastikan semua item ada dalam pakej:
- 1 x MVMT Hive Bluetooth Speaker
- 1 x Kabel Tambahan
- 1 x Kabel Pengecas USB Mikro
- 1 x Manual Pengguna (dokumen ini)
Image: A silver MVMT Hive portable Bluetooth speaker, showcasing its compact, cylindrical design and aluminum body, alongside its included auxiliary and micro USB cables.
Mengecas Speaker
- Locate the Micro USB charging port on the speaker.
- Connect the Micro USB end of the provided charging cable to the speaker's charging port.
- Sambungkan hujung kabel USB standard kepada penyesuai kuasa USB (tidak disertakan) atau port USB komputer.
- Lampu penunjuk pengecasan akan menyala, biasanya merah, untuk menunjukkan bahawa pembesar suara sedang dicas.
- A full charge takes approximately 3-4 hours. The indicator light will change or turn off once charging is complete.
- A fully charged speaker provides up to 6 hours of playtime in Bluetooth wireless mode.
Berpasangan Bluetooth
Follow these steps to connect your MVMT Hive speaker to a Bluetooth-enabled device:
- Pastikan pembesar suara dicas sepenuhnya.
- Hidupkan pembesar suara dengan menekan dan menahan butang kuasa. Pembesar suara akan memasuki mod pasangan Bluetooth, yang ditunjukkan oleh lampu LED yang berkelip.
- Pada peranti mudah alih anda (telefon pintar, tablet, komputer), dayakan Bluetooth dan cari peranti yang tersedia.
- Select "MVMT Hive" from the list of found devices.
- Once paired, the speaker will emit an audible confirmation tone, and the LED indicator will typically stop flashing and remain solid.
- You can now play audio from your device through the MVMT Hive speaker.
Note: The speaker will automatically attempt to reconnect to the last paired device when powered on, if that device's Bluetooth is active and within range.
Operasi Mod AUX
To use the speaker with devices that do not support Bluetooth, use the auxiliary (AUX) input:
- Connect one end of the provided 3.5mm auxiliary cable to the AUX input port on the MVMT Hive speaker.
- Connect the other end of the 3.5mm auxiliary cable to the headphone jack or AUX output of your audio device.
- The speaker should automatically switch to AUX mode. If not, ensure no Bluetooth connection is active.
- Laraskan kelantangan pada kedua-dua peranti audio dan pembesar suara anda untuk bunyi yang optimum.
Menyelesaikan masalah
| Masalah | Penyelesaian |
|---|---|
| Speaker tidak dihidupkan. | Ensure the speaker is fully charged. Connect it to a power source using the Micro USB cable and allow it to charge for 3-4 hours. |
| Tidak boleh berpasangan melalui Bluetooth. |
|
| Tiada bunyi atau kelantangan rendah. |
|
| Penyelewengan bunyi. |
|
Penyelenggaraan dan Penjagaan
- Jauhkan pembesar suara daripada air, kelembapan dan suhu yang melampau.
- Do not expose the speaker to direct sunlight for extended periods.
- Bersihkan pembesar suara dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
- Elakkan daripada menjatuhkan atau menundukkan pembesar suara kepada impak yang kuat.
- When not in use for a long time, charge the speaker at least once every three months to maintain battery health.
Spesifikasi
| Nombor Model | SP2854-SIA |
| Jenama | MVMT |
| Teknologi Ketersambungan | Bluetooth, Tambahan, USB |
| Sumber Kuasa | Dikuasakan Bateri |
| Masa Main Bateri | Up to 6 hours (Bluetooth mode) |
| Masa Mengecas | 3-4 jam |
| Kuasa Keluaran Pembesar Suara | 2 x 2W (jumlah 4W) |
| Dimensi Produk | 16.69 x 3.4 x 5.89 cm |
| Berat badan | 317.51 g |
| bahan | Lightweight Aluminum Body |
| Ciri Khas | Mudah alih |
Waranti dan Sokongan
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.
