Cree Lighting Connected LED Smart Bulb User Manual

pengenalan

The Cree Connected LED bulb is designed to provide an easy-to-use and cost-effective solution for customizing lighting in your home. This smart bulb can be controlled from anywhere, offering convenience and flexibility. It integrates with compatible home automation systems, allowing you to manage your lighting settings via an app on your iOS or Android device.

The Cree Connected LED bulb offers convenient control from anywhere, enhancing your home lighting experience.

Maklumat Keselamatan

Sila baca dan fahami semua arahan keselamatan sebelum memasang atau menggunakan produk ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau bahaya lain.

• Penggunaan Dalaman Sahaja: This bulb is designed for indoor use in dry locations. Do not use in wet or damp persekitaran.
• Bukan untuk Lekapan Tertutup: Do not use this bulb in fully enclosed luminaires or fixtures, as this can trap heat and shorten the bulb's lifespan.
• LED boleh malap: This bulb is dimmable, but it is not recommended for use with traditional wall dimmers. Control dimming via a compatible smart hub and app.
• Matikan Sebelum Pemasangan: Always turn off the power to the fixture at the circuit breaker before installing or removing the bulb.
• Voltage Keserasian: Pastikan voltan lekapantage (120 Volts) matches the bulb's requirements.
• Tangani dengan Berhati-hati: Avoid dropping the bulb or subjecting it to excessive force.

Kandungan Pakej

The package for your Cree Connected LED Smart Bulb typically includes:

• 1 x Cree Connected LED Smart Bulb

The product packaging for the Cree Connected LED Smart Bulb.

Persediaan

To set up your Cree Connected LED Smart Bulb, you will need a compatible ZigBee certified hub (e.g., Wink, SmartThings, WeMo, or Alexa devices with built-in ZigBee hub like Echo Plus, Echo Studio, Echo Show 2nd Gen).

1. Pasang Mentol: Screw the Cree Connected LED bulb into a standard E26 light socket. Ensure the power to the fixture is off before installation.
2. Prepare Your Hub: Place your compatible ZigBee hub into device discovery mode. Refer to your hub's specific instructions for this step. It is often recommended to initiate discovery mode on the hub sebelum ini turning on the bulb.
3. Power On the Bulb: Turn on the power to the light fixture. The bulb should light up. Your hub should detect and pair with the bulb automatically. A successful pairing is often indicated by the bulb blinking twice.
4. Download and Launch App: Download the applicable app for your chosen hub (e.g., Wink app, SmartThings app, Alexa app) on your iOS or Android device. Launch the app and follow the on-screen instructions to add and configure your new bulb.
5. Namakan Mentol Anda: Once paired, you can name your bulb within the app for easy identification and control (e.g., "Living Room Lamp," "Lampu Dapur").

Resetting the Bulb to Factory Defaults

If you experience difficulty pairing the bulb or need to reset it, follow this sequence:

• 1. Turn the bulb DIMATIKAN selama 2 saat.
• 2. Turn the bulb ON selama 1 saat.
• 3. Turn the bulb DIMATIKAN selama 2 saat.
• 4. Turn the bulb ON selama 1 saat.
• 5. Turn the bulb DIMATIKAN selama 2 saat.
• 6. Turn the bulb ON selama 1 saat.
• 7. Turn the bulb DIMATIKAN selama 2 saat.
• 8. Turn the bulb ON.

After the fourth ON cycle, the light will blink twice, indicating a successful reset. You can then attempt to pair the bulb again.

Cree Lighting offers a variety of smart lighting solutions.

Arahan Operasi

Once your Cree Connected LED Smart Bulb is successfully paired with your hub, you can control it using the associated mobile application or voice commands through compatible smart assistants.

• Kawalan Hidup/Mati: Use the app to turn the bulb on or off instantly.
• Peredupan: Adjust the brightness of the bulb to your desired level using the dimming controls within the app. The bulb offers a full range of dimming.
• Penjadualan: Set schedules for your lights to turn on or off automatically at specific times, or to simulate occupancy when you are away from home.
• Pengelompokan: Group multiple Cree Connected bulbs together to control them simultaneously as a single unit.
• Kawalan Suara: If connected to a voice assistant (e.g., Alexa), use voice commands to control your lights (e.g., "Alexa, turn on Living Room Light," "Alexa, dim Kitchen to 50%").

Control your smart bulbs easily through the mobile application.

Control your lights remotely for convenience and security.

Penyelenggaraan

The Cree Connected LED Smart Bulb requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Pembersihan: Pastikan mentol sejuk dan kuasa dimatikan sebelum membersihkan. Lap mentol dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau bahan kasar.
• Storan: If storing the bulb for an extended period, keep it in its original packaging or a protective container in a cool, dry place.
• Elakkan Terlalu Panas: Do not install the bulb in enclosed fixtures or areas with poor ventilation, as this can lead to overheating and reduce its lifespan.

Menyelesaikan masalah

If you encounter issues with your Cree Connected LED Smart Bulb, refer to the following common problems and solutions:

Spesifikasi

Dimensions of the Cree Connected LED Smart Bulb.

Waranti dan Sokongan

Waranti: The Cree Connected LED Smart Bulb comes with a 3-year limited warranty. Please refer to the product packaging for complete details regarding warranty coverage and terms.

Sokongan: For additional support, frequently asked questions, or to access the latest user guides and installation manuals, please visit the official Cree Lighting website. You may also find helpful resources in the PDF documents provided by the manufacturer:

• Manual Pemasangan (PDF)
• Panduan Pengguna (PDF)
• Manual Pengguna (PDF)