pengenalan
The QualGear QG-TM-020-BLK Ultra Low Profile Articulating TV Wall Mount is designed for most 23 to 42 inch LED and LCD flat-panel televisions, supporting weights up to 66 lbs. This full-motion mount provides a wide range of movement, including panning, tilting, and swiveling, to optimize your viewing experience. It features integrated cable management and decorative covers for a clean installation. Built-in level adjustment ensures a perfectly level display.
Maklumat Keselamatan
Always read and understand all instructions before installation and use. If you have any questions, contact QualGear customer support. Ensure the mounting surface can safely support the combined weight of the mount and your television. Use appropriate tools and follow all drilling and mounting guidelines. Improper installation may result in serious injury or damage.
Kandungan Pakej
Image: Components included in the QualGear QG-TM-020-BLK TV mount package, showing the mount, various screws, spacers, and the instruction manual.
- QG-TM-020-BLK TV mount
- Manual warna
- Wall marking template
- Kotak hadiah
- Pre-sorted hardware pack (for wood studs, concrete, and brick surfaces)
- Tahap gelembung
Spesifikasi
Image: Technical diagram illustrating the dimensions, tilt, and swivel capabilities of the QualGear QG-TM-020-BLK mount.
- Gaya Gunung: Gunung Artikulasi
- Compatible TV Size: 23 hingga 42 inci
- Kapasiti Berat Maksimum: Sehingga 66 paun (30 kg)
- VESA Mounting Hole Patterns (mm): 75x75, 100x100, 200x100, 200x200
- Julat Miring: +5 degrees to -15 degrees
- Julat Pusing: 90 degrees left or right
- Sambungan daripada Dinding: 1.8 inches (45.7 mm) to 19.5 inches (497 mm)
- Pelarasan Tahap: 3 darjah mengikut arah jam dan lawan jam
- Bahan: Keluli Aloi
- Dimensi Produk: 12.88 x 11.22 x 2.48 inci (32.7 x 28.5 x 6.3 cm)
- Berat Barang: 7 paun (3.17 kg)
Semakan Keserasian TV
Image: Visual guide for checking TV compatibility, detailing supported screen sizes, maximum weight, and VESA patterns.
- Size of TV: Supports most 23 to 42-inch TVs.
- Weight of TV: Supports TVs weighing up to 66 lbs.
- Mounting Hole Patterns (VESA) in mm: Supports standard mounting hole patterns from 75x75, 100x100, 200x100, 200x200.
Persediaan dan Pemasangan
For detailed step-by-step instructions, please refer to the complete manual provided in the package or scan the QR code on the 'What You Will Get' image for a digital version: Digital Manual Link
Alat Diperlukan (Tidak Termasuk)
- Dispenser Pita
- Pita Pengukur
- Tahap Semangat
- Drill Bit (Wood: 5/32 in (4 mm), Concrete: 5/16 in (8 mm))
- Pengesan Stud
- latih tubi
- Socket & Wrench
- Pensel
- Pemutar skru
Pemasangan Selesaiview
The installation process involves mounting the wall plate to your desired surface (wood stud, concrete, or brick) and then attaching the TV plate to the back of your television. Finally, the TV is secured onto the wall plate. Ensure all connections are tight and secure before releasing TV.
Video: An Amazon Basics video demonstrating the assembly process for a full motion TV mount. This video provides a visual guide to the installation steps, including attaching the mount to the wall and securing the TV.
Arahan Operasi
Image: The QualGear QG-TM-020-BLK mount fully extended, showcasing its articulating arm and VESA plate.
Image: A television mounted on the QualGear QG-TM-020-BLK, illustrating the range of motion for tilting and swiveling to achieve optimal viewsudut-sudut.
- Sambungan: Tarik TV perlahan-lahan menjauhi dinding untuk memanjangkan lengan artikulasi.
- Penarikan balik: Push the TV gently back towards the wall until it is in the desired position. The super slim design allows the TV to sit just 1.8 inches from the wall when fully retracted.
- Pusing: Carefully pivot the TV left or right to achieve a 90-degree swivel in either direction.
- Condong: Adjust the tilt angle of the TV from +5 degrees (upward) to -15 degrees (downward) to reduce glare and find the best viewsudut ing.
- meratakan: Utilize the post-installation leveling adjustments to ensure the TV is perfectly horizontal after hanging.
Penyelenggaraan
Regularly check all screws and connections to ensure they remain tight and secure. Dust the mount and TV with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners. Periodically inspect the mount for any signs of wear or damage. If any issues are found, discontinue use and contact customer support.
Menyelesaikan masalah
- TV tidak rata: Use the built-in level adjustment feature to correct the angle.
- Difficulty moving the arm: Ensure all adjustment bolts are sufficiently loosened. If the arm is too stiff, apply a small amount of silicone-based lubricant to the pivot points.
- Gunung berasa tidak stabil: Re-check all wall and TV connections. Ensure lag bolts are securely fastened into studs or appropriate anchors are used for masonry. Do not exceed the maximum weight capacity.
Waranti dan Sokongan
The QualGear QG-TM-020-BLK Articulating TV Wall Mount comes with a Waranti Terhad 3 Tahun. For warranty claims, technical assistance, or any product-related inquiries, please contact QualGear customer support through their official webtapak atau maklumat hubungan yang diberikan dalam pembungkusan produk anda.
