Produk Selesaiview
The Fatek FBs-24MAT2-AC is a compact and powerful Programmable Logic Controller (PLC) designed for industrial automation applications. It features a robust set of digital inputs and outputs, communication capabilities, and a wide operating voltage range, making it suitable for various control tasks.
Rajah 1: Fatek FBs-24MAT2-AC Programmable Logic Controller. This image displays the Fatek FBs-24MAT2-AC Programmable Logic Controller. It features various input (X) and output (Y) terminals, power input (AC100-240V), and communication ports (RS-232). Status indicator LEDs for Power (POW), Run (RUN), and Error (ERR) are visible on the front panel. The model number FBs-24MA is also clearly marked.
Persediaan dan Pemasangan
Proper installation is crucial for the reliable operation of the PLC. Follow these guidelines for setup:
1. Sambungan Bekalan Kuasa
- Connect the AC power source (100-240VAC) to the IN (L) dan N terminals. Ensure the power supply is stable and within the specified voltagjulat e.
- The unit is UL Certified, ensuring compliance with safety standards.
2. Input and Output Wiring
- Input Digital (X0-X13): The PLC provides 14 points of 24VDC digital input. Up to 4 points support high-speed input (up to 10KHz). Connect your sensors and input devices to these terminals.
- Digital Outputs (Y0-Y9): The PLC features 10 points of Sink (NPN) transistor digital output. 4 points support high-speed output (10KHz). Connect your actuators and output devices to these terminals.
- Refer to the wiring diagram on the unit for specific terminal assignments.
3. Pelabuhan Komunikasi
- The PLC has 1 built-in RS-232 port (labeled PORTO). This port is used for programming and communication with other devices. Additional RS-232 ports can be expanded if needed.
Arahan Operasi
Once the PLC is powered and wired, its operation is controlled by the loaded program. Monitor the status indicators for operational feedback.
Petunjuk Status:
- POW (Power): Illuminates when the PLC is receiving power.
- RUN (Run): Illuminates when the PLC is executing its program.
- ERR (Error): Illuminates when an error or fault condition is detected within the PLC or its program. Refer to the programming software for detailed error codes.
Programming of the PLC is performed using compatible software (not included) via the RS-232 communication port. Consult the software's documentation for programming procedures.
Penyelenggaraan
The Fatek FBs-24MAT2-AC PLC is designed for robust industrial use and requires minimal maintenance. Adhere to the following for optimal performance:
- Pembersihan: Keep the unit free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
- Persekitaran: Ensure the operating environment is within the specified temperature and humidity ranges to prevent damage. Avoid exposure to excessive vibration, moisture, or corrosive gases.
- Sambungan: Periksa semua sambungan pendawaian secara berkala untuk memastikan ia selamat dan bebas daripada kakisan.
Menyelesaikan masalah
This section provides guidance for common issues. For complex problems, consult the manufacturer's technical support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No Power (POW LED Off) | Tiada bekalan kuasa, pendawaian tidak betul, fius putus. | Check power connections (L, N terminals). Verify power source voltage. Inspect internal fuses if accessible (consult manual). |
| ERR LED On | Program error, hardware fault, communication error. | Connect to PLC with programming software to read error codes. Check for wiring faults on I/O. Restart PLC. |
| PLC Not Responding | Program halted, communication issue, hardware malfunction. | Check RUN LED status. Verify communication cable and settings. Power cycle the PLC. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | FBs-24MAT2-AC (FBs-24MAT) |
| Pengeluar | Fatek |
| Mata Input | 14 points 24VDC digital input (up to 10KHz in 4 points) |
| Mata Keluaran | 10 Points Sink (NPN) transistor digital output (4 points 10KHz output) |
| Bekalan Kuasa | 100~240VAC |
| Pelabuhan Komunikasi | 1 built-in RS-232 (expandable up to 3) |
| Pensijilan | Diperakui UL |
| Dimensi Pakej | 4.5 x 4 x 4 inci |
| Berat Barang | 1.06 paun |
| Jenis Paparan | LED Indicators (for POW, RUN, ERR) |
| UPC | 687965401075 |
Waranti dan Sokongan
For information regarding product warranty, please refer to the documentation provided with your purchase or contact the authorized Fatek distributor or seller from whom the product was acquired. Specific warranty terms and conditions may vary by region and seller.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the manufacturer, Fatek, or your product supplier directly. Contact information can typically be found on the manufacturer's official webtapak atau invois pembelian anda.
