Manual Pengguna ECHO ECS300T 26.9cc Gergaji Petrol

1. Pengenalan

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your ECHO ECS300T 26.9cc Gasoline Chainsaw. Please read this manual thoroughly before operating the chainsaw and keep it for future reference. Proper use and maintenance will ensure optimal performance and extend the life of your tool.

2. Maklumat Keselamatan

WARNING: Chainsaws are dangerous tools. Improper use can result in serious injury or death. Always follow safety guidelines.

• Always wear appropriate personal protective equipment (PPE), including a helmet, eye protection, hearing protection, gloves, and safety boots.
• Pastikan kawasan kerja bersih daripada orang ramai, terutamanya kanak-kanak dan haiwan peliharaan.
• Periksa gergaji rantai sebelum setiap penggunaan untuk mengesan bahagian yang longgar, kerosakan atau kebocoran bahan api.
• Never operate the chainsaw when fatigued or under the influence of alcohol or drugs.
• Kekalkan cengkaman yang kukuh dengan kedua-dua tangan pada pemegang gergaji.
• Be aware of kickback and how to prevent it.
• Isi minyak di kawasan pengudaraan yang baik dengan enjin dimatikan dan sejuk.
• Store the chainsaw safely, out of reach of children.

3. Kandungan Pakej

Setelah membuka bungkusan, pastikan semua barang ada dan tidak rosak:

• ECHO ECS300T Chainsaw Unit
• Guide Bar (35 cm)
• Rantai Gergaji
• Penutup Bar Panduan
• Tool Kit (e.g., wrench, screwdriver)
• Manual Pengguna (dokumen ini)

4. Pengenalan Komponen

Rajah 1: Berakhirview of the ECHO ECS300T Chainsaw. This image displays the complete chainsaw unit, featuring the engine housing, front and rear handles, and the 35 cm guide bar with the saw chain installed. The ECHO branding is visible on the guide bar and engine cover.

Familiarize yourself with the main components of your chainsaw:

• Bar Panduan: The metal blade that supports the saw chain.
• Rantai Gergaji: The cutting element that rotates around the guide bar.
• Pemegang hadapan: For stability and control during operation.
• Pemegang Belakang: Mengandungi pencetus pendikit dan kunci keluar keselamatan.
• Pencetus Pendikit: Mengawal kelajuan enjin.
• Brek rantai: A safety device that stops the chain instantly.
• Starter Rope Handle: Digunakan untuk menghidupkan enjin secara manual.
• Tuas Tercekik: Digunakan untuk menghidupkan enjin sejuk.
• Mentol Primer: Pumps fuel into the carburetor for easier starting.
• Penutup Tangki Bahan Api: For filling the fuel tank.
• Chain Oil Tank Cap: For filling the chain oil tank.

5. Persediaan

5.1 Penyediaan Bahan Api dan Minyak Rantai

This chainsaw requires a mixture of gasoline and 2-stroke engine oil. Always use fresh, high-quality unleaded gasoline and a premium 2-stroke engine oil specifically designed for air-cooled engines. Refer to the engine oil manufacturer's instructions for the correct mixing ratio (typically 50:1 or 25:1).

• Campuran Bahan Api: Mix gasoline and 2-stroke oil in a separate, approved fuel container. Shake well before filling the chainsaw's fuel tank.
• Minyak rantai: Fill the chain oil tank with high-quality bar and chain oil. Do not use waste oil or motor oil, as this can damage the pump and chain.

5.2 Pemasangan Bar Panduan dan Rantaian

1. Pastikan brek rantai telah dilepaskan.
2. Remove the chain cover by loosening the two nuts.
3. Fit the chain onto the sprocket and around the guide bar, ensuring the cutting edges face the correct direction.
4. Mount the guide bar onto the studs, aligning the chain tensioner pin with the hole in the guide bar.
5. Replace the chain cover and hand-tighten the nuts.
6. Adjust the chain tension using the tensioning screw. The chain should be snug against the bar but still able to be pulled freely by hand. Lift the tip of the guide bar slightly while tightening the nuts to ensure proper tension.
7. Fully tighten the chain cover nuts.

6. Arahan Operasi

6.1 Menghidupkan Enjin (Permulaan Sejuk)

1. Letakkan gergaji rantai di atas permukaan yang keras dan rata.
2. Pasang brek rantai.
3. Tekan mentol primer beberapa kali sehingga bahan api kelihatan di garisan kembali.
4. Pull the choke lever to the "FULL CHOKE" position.
5. Hold the chainsaw firmly with one hand on the front handle and pull the starter rope handle briskly until the engine "pops" or attempts to start (usually 1-3 pulls).
6. Push the choke lever to the "HALF CHOKE" or "RUN" position (depending on model).
7. Pull the starter rope again until the engine starts and runs.
8. Once the engine is running, blip the throttle to disengage the choke completely.
9. Allow the engine to warm up for a few moments before disengaging the chain brake and beginning work.

6.2 Menghidupkan Enjin (Permulaan Hangat)

If the engine is warm, the choke may not be necessary. Simply pull the starter rope until the engine starts.

6.3 Operasi Memotong

• Always maintain a balanced stance and firm grip.
• Plan your cuts to avoid kickback and ensure the wood is stable.
• Let the chainsaw do the work; do not force it.
• Be aware of falling branches and logs.

6.4 Menghentikan Enjin

Release the throttle trigger and move the engine stop switch to the "OFF" position.

7. Penyelenggaraan

Regular maintenance is crucial for the safe and efficient operation of your chainsaw.

7.1 Penyelenggaraan Harian

• Check chain tension and adjust if necessary.
• Inspect the chain for sharpness and damage. Sharpen or replace as needed.
• Bersihkan penapis udara.
• Check the chain oil level and refill.
• Clean debris from the guide bar groove and sprocket area.

7.2 Penyelenggaraan Berkala

• Palam Pencucuh: Inspect and clean the spark plug every 25 hours of operation. Replace if electrodes are worn or fouled.
• Penapis Bahan Api: Inspect and replace the fuel filter annually or every 100 hours.
• Pelarasan Karburator: If the engine runs poorly, consult a qualified service technician for carburetor adjustments.

8. Penyelesaian masalah

9. Spesifikasi

• Jenama: ECHO
• model: ECS300T
• Anjakan Enjin: 26.9cc
• Panjang Bar Panduan: 35 sm
• Berat produk: 5.1 kg
• Dimensi Produk (L x W x H): 28.7 cm x 23.3 cm x 21 cm
• Sumber Kuasa: Enjin Petrol
• ASIN: B015IXQCHS
• Tarikh Pertama Tersedia: 18 September 2015

10. Waranti dan Sokongan

For warranty information, please refer to the warranty card included with your product or contact your authorized ECHO dealer or the retailer where the product was purchased. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or service, please contact your local authorized ECHO service center. Contact details can typically be found on the manufacturer's official webtapak atau melalui peruncit anda.