fischer 534474

Fischer Repair Mortar 534474 310ml Cement Grey Instruction Manual

Model: 534474

1. Produk Lebihview

The Fischer Repair Mortar is a ready-to-use, sprayable polymer emulsion designed for a variety of repair applications. Its stable consistency ensures ease of use, and it offers excellent resistance to weathering, aging, and UV radiation. This mortar is suitable for both indoor and outdoor use.

Ciri-ciri Utama:

  • Ready-to-use formulation, eliminating the need for premixing.
  • Effective in various weather conditions, adhering even to slightly damp permukaan.
  • Designed for inconspicuous joints.
  • Suitable for both interior and exterior applications.
  • Almost odorless for comfortable use.
Fischer Repair Mortar 310ml cartridge

Figure 1: Fischer Repair Mortar 310ml cartridge, ready for use.

2. Maklumat Keselamatan

Always read the product label and safety data sheet before use. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection. Ensure adequate ventilation when working indoors. Keep out of reach of children and pets. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice if irritation persists.

3. Persediaan dan Persediaan

3.1 Penyediaan Permukaan

  1. Ensure the surface is clean, free from loose particles, dust, grease, and other contaminants.
  2. The mortar can be applied to slightly damp surfaces, but excessively wet areas should be dried.
  3. For optimal adhesion, porous surfaces may benefit from light dampening prior to application.

3.2 Product Preparation

  1. The Fischer Repair Mortar is supplied in a cartridge and is ready for immediate use; no premixing is required.
  2. Cut the tip of the cartridge nozzle to the desired bead size.
  3. Masukkan kartrij ke dalam pistol pengedap standard.
Fischer Repair Mortar cartridge with mortar blob

Figure 2: Fischer Repair Mortar cartridge with a sample of the grey mortar.

4. Arahan Pengendalian (Aplikasi)

The mortar can be applied at temperatures ranging from +5 °C to +40 °C.

4.1 General Repair Work

  1. Apply the mortar evenly into the repair area using the caulking gun.
  2. Smooth the surface immediately after application using a spatula or appropriate tool for an inconspicuous finish.
  3. Allow sufficient time for curing as per product specifications.

4.2 Aplikasi Khusus

  • Masonry Renovations: Fill cracks or gaps in masonry structures. Ensure the mortar penetrates well into the damaged areas.
  • Roof Tile Fixing: Use to secure or repair roof tiles. The mortar's weather resistance makes it suitable for exterior exposure.
  • Sealing Drill Holes: Effectively seal drill holes in various materials.
  • General Repair Work: Suitable for minor repairs on concrete, plaster, and other building materials.
Close-up of brick wall with mortar joints

Gambar 3: Cthample of masonry with mortar joints, illustrating a potential application area.

Bolt secured in a wall with surrounding repair mortar

Rajah 4: Bekasample of a bolt secured in a wall, demonstrating how the mortar can be used for sealing and repair around fixings.

5. Penyelenggaraan dan Penyimpanan

The Fischer Repair Mortar can be reused. To store an opened cartridge, ensure the nozzle is tightly sealed to prevent air exposure and drying. Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. The mortar is temperature resistant from -30 °C to +75 °C and is frost-proof in the cartridge down to -15 °C.

5.1 Pembersihan

Clean tools and excess fresh mortar immediately with water. Cured mortar may require mechanical removal.

6. Penyelesaian masalah

  • Lekatan yang lemah: Ensure the surface was properly cleaned and free of contaminants. For very porous surfaces, light dampening might improve adhesion.
  • Pengawetan Perlahan: Curing time can be affected by temperature and humidity. Lower temperatures and higher humidity may prolong curing. Ensure adequate ventilation.
  • Kemasan Tidak Sekata: Smooth the mortar immediately after application with a suitable tool. Practice on a scrap piece if necessary.
  • Mortar Hardened in Cartridge: Ensure the nozzle was properly sealed after previous use. Store in recommended conditions.

7. Spesifikasi

Nombor Model534474
Jenamafischer
warnaKelabu
Isipadu Cecair310ml (approx. 10.48 fl oz)
Borang PerkaraSpray (from cartridge)
Berat Barang500 Gram (lebih kurang 1.1 paun)
Suhu Operasi+5 °C hingga +40 °C
Rintangan Suhu-30 °C hingga +75 °C
Tahap Ketahanan AirTahan Air
Ciri KhasWeather and UV Resistant
Dimensi Produk7.09 x 5.91 x 7.87 inci
PenggunaanMasonry repair, Roof tile fixing, Hole closing, General repair

8. Waranti dan Sokongan

For warranty information or technical support, please refer to the official fischer website or contact fischer customer service directly. Details can typically be found on the product packaging or the manufacturer's official channels.

Dokumen Berkaitan - 534474

Praview Palam Togol Fischer KDS: Pemasangan Selamat untuk Siling Logam Trapezoid
Temui Palam Togol Fischer KDS, elemen penetapan serba boleh untuk pemasangan paip yang kukuh pada siling kepingan logam trapezoid dalam sistem pemercik. Menampilkan kelulusan VdS dan FM, kapasiti beban tegangan yang tinggi dan pemasangan yang mudah. ​​Sesuai untuk saluran udara, pengudaraan, talian kuasa dan banyak lagi.
Praview Fischer DuoBlade: Palam Plasterboard Penggerudian Sendiri untuk Pemasangan Pantas
Temui Fischer DuoBlade, palam papan eternit penggerudian sendiri yang direka untuk pemasangan yang cepat dan mudah. Ketahui tentang ciri-cirinya, advantages, fungsi, dan aplikasi dalam pelbagai bahan binaan.
Praview Fischer KSU Air Conditioner Fixing Kits - Technical Specifications and Installation Guide
Detailed information on Fischer KSU and KSU S air conditioner fixing kits for secure wall mounting of HVAC units, pumps, and ventilators. Includes applications, advantages, material properties, and comprehensive technical data with load capacities.
Praview Fischer Folding Roof Box User Manual and Safety Instructions
Comprehensive guide for the Fischer folding roof box, including assembly, safety instructions, and technical specifications. Covers usage in multiple languages.
Praview Sistem Mortar dan Penambat Suntikan Fischer FIS V Zero - Data Teknikal dan Panduan Pemasangan
Panduan teknikal yang komprehensif untuk mortar suntikan Fischer FIS V Zero dan pelbagai sistem penambat termasuk FIS A, RG M, FIS E, FIS HK, Rebar dan FRA. Mempunyai spesifikasi terperinci, arahan pemasangan, data suhu/masa dan maklumat produk untuk profesional pembinaan.
Praview Mortar Suntikan Fischer FIS V Plus: Data Teknikal, Spesifikasi dan Panduan Pemasangan
Spesifikasi teknikal yang komprehensif, arahan pemasangan dan butiran produk untuk sistem mortar suntikan kimia Fischer FIS V Plus, termasuk data mengenai aplikasi konkrit dan batu, sambungan rebar dan pelbagai varian produk.