Manual Pengguna Stesen Suhu Tanpa Wayar La Crosse Technology WS9162IT-SIL

1. Pengenalan

Thank you for choosing the La Crosse Technology WS9162IT-SIL Wireless Temperature Station. This device provides accurate indoor and outdoor temperature readings, featuring a quartz clock and 24-hour time format. It utilizes 868 MHz IT+ technology for reliable wireless transmission up to 100 meters in open fields. This manual will guide you through the setup, operation, and maintenance of your temperature station.

2. Maklumat Keselamatan

• Baca semua arahan sebelum mengendalikan peranti.
• Jangan dedahkan unit utama kepada suhu yang melampau, cahaya matahari langsung atau lembapan.
• The outdoor sensor is designed for outdoor use but should be protected from direct rain and snow for extended longevity.
• Use only the specified battery type (AA LR6). Do not mix old and new batteries or different battery types.
• Buang bateri terpakai secara bertanggungjawab mengikut peraturan tempatan.
• Jauhkan peranti daripada capaian kanak-kanak.

3. Kandungan Pakej

• La Crosse Technology WS9162IT-SIL Main Temperature Station Unit
• Penderia Suhu Luar Wayarles
• Manual Arahan

4. Produk Lebihview

The La Crosse Technology WS9162IT-SIL consists of a main display unit and a wireless outdoor sensor. The main unit features an LCD screen displaying indoor and outdoor temperatures, as well as the current time. It can be mounted on a wall or placed on a tabletop. The outdoor sensor transmits temperature data wirelessly to the main unit.

Image 1: La Crosse Technology WS9162IT-SIL Wireless Temperature Station. This image shows the main display unit and the accompanying wireless outdoor sensor, both in a silver finish. The main unit has an LCD screen for displaying temperature and time information.

5. Persediaan

5.1 Pemasangan Bateri

1. Untuk Sensor Luar Tanpa Wayar: Open the battery compartment on the back of the outdoor sensor. Insert the required batteries (typically 2 x AA LR6, not included) according to the polarity markings (+/-). Close the compartment securely.
2. For the Main Temperature Station Unit: Open the battery compartment on the back of the main unit. Insert 2 x AA LR6 batteries (not included) according to the polarity markings (+/-). Close the compartment securely.

Penting: Always insert batteries into the outdoor sensor sebelum ini inserting them into the main unit to ensure proper synchronization.

5.2 Penempatan Sensor

• Letakkan sensor luar di kawasan yang teduh, jauh daripada cahaya matahari langsung dan sumber haba, untuk memastikan bacaan suhu yang tepat.
• Pastikan sensor dilindungi daripada hujan dan salji secara langsung.
• Position the sensor within 100 meters (328 feet) of the main unit, ensuring there are minimal obstructions (e.g., thick walls, metal objects) that could interfere with the 868 MHz wireless signal.

5.3 Penyegerakan Awal

After inserting batteries into both units, the main station will automatically search for the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature will appear on the main unit's display. If the outdoor temperature does not appear, refer to the Troubleshooting section.

6. Arahan Operasi

6.1 Paparan Maklumat

Paparan LCD menunjukkan maklumat berikut:

• Masa Semasa: Displayed in 24-hour format.
• Suhu Dalaman: The temperature measured by the main unit.
• Suhu Luaran: The temperature transmitted from the wireless sensor.
• Penunjuk Bateri Rendah: Icons will appear to indicate low battery for either the main unit or the outdoor sensor.

6.2 Pemilihan Unit Suhu (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), locate the °C/°F button (usually on the back or side of the main unit) and press it. The display will update to the selected unit.

6.3 Minimum/Maximum Temperature Display

The station records the minimum (MIN) and maximum (MAX) indoor and outdoor temperatures. Press the 'MIN/MAX' button (or similar, refer to specific button labels on your unit) to cycle through the current, minimum, and maximum temperature readings. To reset the MIN/MAX records, press and hold the 'MIN/MAX' button for a few seconds.

6.4 Penetapan Masa

The time is typically set automatically via a quartz clock. If manual adjustment is needed, refer to the buttons on the back of the unit (e.g., 'SET', 'MODE', '+', '-') to enter time setting mode and adjust the hours and minutes. The time format is 24-hour.

7. Penyelenggaraan

7.1 Penggantian Bateri

When the low battery indicator appears on the display, replace the batteries in the respective unit (main station or outdoor sensor). Always replace all batteries in a unit at the same time with new, fresh batteries of the specified type (AA LR6). Follow the battery installation steps in Section 5.1.

7.2 Pembersihan

Bersihkan paparan dan casing of the main unit and sensor with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ini boleh merosakkan peranti.

8. Penyelesaian masalah

9. Spesifikasi

• model: WS9162IT-SIL
• Masa: Quartz clock, 24-hour format
• Julat Suhu Dalaman: -9.9°C hingga +59.9°C (14.2°F hingga 139.8°F)
• Julat Suhu Luaran: -39.9°C hingga +59.9°C (-39.8°F hingga 139.8°F)
• Resolusi Suhu: 0.1°C (0.2°F)
• Indoor Temperature Reading Interval: Setiap 15 saat
• Kekerapan: 868 MHz
• Julat penghantaran: Up to 100 meters (328 feet) in open field
• Teknologi: IT+
• Jenis Paparan: LCD
• Power Source (Main Station): 2 x AA LR6 batteries (not included)
• Power Source (Outdoor Sensor): Batteries (type not specified, typically 2 x AA LR6, not included)
• Penunjuk Bateri Rendah: ya
• Pilihan Pemasangan: Wall mountable or tabletop placement
• Dimensi Stesen: 80 x 150 x 29.4 mm (3.15 x 5.91 x 1.16 inci)
• Berat produk: 260 g (0.57 paun)

10. Waranti dan Sokongan

La Crosse Technology products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official La Crosse Technology website. For technical support or further assistance, please contact La Crosse Technology customer service through their official channels.