OLIGHT OLTS1

Olight S1 Baton LED Flashlight User Manual

Model: OLTS1

pengenalan

The Olight S1 Baton is a compact and powerful LED flashlight designed for everyday carry (EDC). It features a CREE XM-L2 LED, delivering up to 500 lumens of output with a beam distance of 110 meters. Its small size, measuring 2.4 inches in length and weighing approximately 1.06 ounces, makes it highly portable. The S1 Baton is impact-resistant, water-resistant, and includes a built-in timer and a side switch for convenient operation.

Olight S1 Baton LED Flashlight

Image: The Olight S1 Baton LED Flashlight, showcasing its compact design and side switch.

Olight S1 Baton size comparison

Image: The Olight S1 Baton compared to a standard key and a smartphone, illustrating its ultra-compact and lightweight design for easy portability.

Persediaan

Pemasangan Bateri

  1. Tanggalkan penutup ekor lampu suluh dengan memusingkannya lawan arah jam.
  2. Insert one CR123A or RCR123 battery (not included) with the negative (-) end facing towards the LED head of the flashlight. The positive (+) end should face the tail cap.
  3. Screw the tail cap back on clockwise until it is securely tightened. Ensure the tail cap is fully tightened to maintain water resistance and proper electrical contact.

Nota: The S1 Baton requires one CR123A or RCR123 battery. Ensure correct battery polarity during installation to prevent damage to the flashlight.

Olight S1 Baton components diagram

Image: Diagram illustrating key components of the Olight S1 Baton, including the flat tail cap with magnet, lanyard hole, pocket clip, and recessed silicone switch.

Arahan Operasi

Operasi Asas

Fungsi Pemasa

The S1 Baton includes a built-in timer function that allows the light to shut off automatically after a set period (3 or 9 minutes). This is useful for conserving battery life or for specific tasks.

Olight S1 Baton light timer feature

Image: Illustration of the Olight S1 Baton's light timer function, showing its use in a campsenario ini.

Penyelenggaraan

Menyelesaikan masalah

Spesifikasi

ModelOLTS1
Sumber CahayaLED CREE XM-L2
Output Maksimum500 Lumen
Jarak Pancaran110 meters (approx. 120 yards)
Tahap KecerahanMoonlight (0.5 lm), Low (8 lm), Medium (80 lm), High (500 lm), Strobe
Sumber Kuasa1 x CR123A or 1 x RCR123 battery (not included)
Masa Larian (Maks)Up to 25 days (Moonlight mode)
bahanMilspec Type III Hard-anodized Aluminum Body, Silicone Switch
DimensiLength: 61mm (2.4 inches), Diameter: 21mm (0.83 inches)
Berat badanApprox. 1.06 ounces (without battery)
Tahan AirWater Resistant (IPX8 rating, up to 2 meters submersible)
Ciri KhasTIR lens, Built-in timer (3/9 min), Magnetic tail cap, Pocket clip
Olight S1 Baton specifications graphic

Image: Graphic summarizing key specifications of the Olight S1 Baton, including lumens, runtime, throw, battery type, and waterproof rating.

Olight S1 Baton dimensions

Imej: Terperinci view of the Olight S1 Baton showing its compact dimensions: 2.4 inches (61mm) in length and 0.83 inches (21mm) in diameter.

Olight S1 Baton finishing touches and features

Imej: Jarak dekat views highlighting the Olight S1 Baton's TIR lens for a balanced beam, stainless steel bezel and switch ring with Blue PVD coating for durability, and the magnetic flat tailcap for hands-free worklight functionality.

Maklumat Waranti

The Olight S1 Baton is covered by Olight's comprehensive 5-year warranty. This warranty is serviced in the United States. For detailed warranty terms and conditions, please refer to the official Olight webtapak atau hubungi sokongan pelanggan.

Sokongan Pelanggan

For further assistance, technical support, or inquiries regarding your Olight S1 Baton, please visit the official Olight website or contact their customer service department. Keep your product model number (OLTS1) and purchase information readily available when seeking support.

Official Olight Webtapak: www.olightworld.com