Connects2 CTSVX002.2 Steering Wheel Control Interface User Manual

1. Pengenalan

This user manual provides detailed instructions for the installation, operation, and maintenance of the Connects2 CTSVX002.2 Steering Wheel Control Interface. This interface is designed to retain the functionality of your vehicle's factory steering wheel controls when upgrading to an aftermarket head unit.

Please read this manual thoroughly before beginning installation to ensure proper setup and to avoid damage to your vehicle or the product.

2. Produk Lebihview

The Connects2 CTSVX002.2 is a specialized interface that allows seamless integration of an aftermarket car stereo with your vehicle's existing steering wheel controls. It translates the vehicle's CAN-Bus signals into commands recognizable by the new head unit, preserving convenience and safety features.

Rajah 1: Connects2 CTSVX002.2 Steering Wheel Control Interface. The image displays the main interface module (right), a multi-colored wiring harness with various connectors (center), and a vehicle-specific connector block (left) designed to integrate with the car's existing wiring.

3. Apa yang ada di dalam Kotak

Selepas membuka pakej, sahkan bahawa semua komponen ada:

• 1 x Connects2 CTSVX002.2 Steering Wheel Control Interface Module
• 1 x Vehicle-Specific Wiring Harness
• 1 x Aftermarket Head Unit Patch Lead (may be integrated or separate, depending on model)
• 1 x Manual Pengguna (dokumen ini)

4. Keserasian Kenderaan

This interface is compatible with the following Vauxhall/Opel vehicle models, provided they have the original factory head unit and steering wheel controls:

• Vauxhall Antara (2006 - 2010)
• Vauxhall Astra (2004 - 2010)
• Vauxhall Corsa (2004 - 2009)
• Vauxhall Meriva (2005 - 2010)
• Vauxhall Signum (2005 - 2008)
• Vauxhall Tigra (2004 - 2009)
• Vauxhall Vectra (2004 - 2008)
• Vauxhall Zafira (2005 - 2014)

Nota: Compatibility may vary based on specific vehicle trim levels and factory options. Always consult with a professional installer if unsure.

5. Panduan Pemasangan

Sebelum anda memulakan: Disconnect the vehicle's negative battery terminal to prevent electrical shorts. Ensure you have all necessary tools, including trim removal tools, screwdrivers, and wire crimpers/strippers if required.

5.1. Persediaan

1. Carefully remove the factory head unit from the dashboard using appropriate trim removal tools.
2. Disconnect all wiring harnesses from the rear of the factory head unit.

5.2. Wiring the Interface

Connect the Connects2 CTSVX002.2 interface as follows:

• Vehicle Harness Connection: Connect the vehicle-specific connector from the CTSVX002.2 harness to the corresponding factory wiring harness in the vehicle's dashboard.
• Aftermarket Head Unit Connection: Connect the patch lead from the CTSVX002.2 interface to the steering wheel control input on your aftermarket head unit. Refer to your aftermarket head unit's manual for the exact location of this input (often labeled SWC, Remote, or Key1/Key2).
• Sambungan Kuasa dan Pembesar Suara: Connect the remaining power (constant 12V, ignition 12V, ground) and speaker wires from the CTSVX002.2 harness to your aftermarket head unit's corresponding inputs. Ensure all connections are secure and properly insulated.

5.3. Testing and Reassembly

1. Sambung semula terminal bateri negatif kenderaan.
2. Turn on the vehicle's ignition and the aftermarket head unit.
3. Test all steering wheel control functions (volume up/down, track skip, mode, phone controls, etc.) to ensure they operate correctly with the new head unit.
4. If all functions are working, carefully reassemble the dashboard and secure the aftermarket head unit in place.

Penting: If steering wheel controls do not function, refer to the Troubleshooting section or consult a professional installer.

6. Operasi

Once installed, the Connects2 CTSVX002.2 interface operates automatically. Your factory steering wheel controls will now send commands to your aftermarket head unit. The specific functions available will depend on your vehicle's original steering wheel controls and the capabilities of your aftermarket head unit.

• Kawalan Kelantangan: Use the volume up/down buttons on your steering wheel to adjust the audio level.
• Track/Station Control: Use the track skip or seek buttons to change tracks (for media playback) or radio stations.
• Mod/Sumber: The mode button typically cycles through audio sources (Radio, USB, Bluetooth, etc.).
• Kawalan Telefon: If your vehicle has phone controls on the steering wheel, these may be mapped to answer/end call functions on compatible head units.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and technical support, please contact Connects2 directly or refer to their official webtapak. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Connects2 Official Webtapak: www.connects2.com