Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack User Manual

pengenalan

This manual provides essential information for the safe and effective use of your Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack. Tattu LiPo batteries are designed for high-performance applications, particularly in UAV and UAS markets, offering superior quality and reliability. Please read this manual thoroughly before using the battery.

Image: The Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack, featuring its black and orange label, XT60 connector, and balance lead.

Maklumat Keselamatan

WARNING: Lithium Polymer (LiPo) batteries are powerful and can be dangerous if not handled correctly. Failure to follow these instructions can result in fire, personal injury, and property damage.

• Jangan buang bateri ke dalam api.
• Jangan biarkan pengecasan bateri tanpa pengawasan.
• Always charge LiPo batteries on a fire-resistant surface and away from flammable materials.
• Use only chargers specifically designed for LiPo batteries and ensure correct voltage and cell count settings.
• Do not overcharge or over-discharge the battery. Overcharging can lead to fire, and over-discharging can damage the battery.
• Do not puncture, disassemble, short circuit, or modify the battery.
• Jauhkan bateri daripada kanak-kanak dan haiwan peliharaan.
• If the battery swells, smokes, or gets excessively hot, immediately disconnect it and move it to a safe, non-flammable area.
• Store batteries in a cool, dry place, ideally in a LiPo-safe bag or container.

Apa yang ada dalam Kotak

Your Tattu LiPo Battery Pack package includes:

• 1x Tattu 1800mAh 45C 3S1P LiPo Battery Pack with XT60 Plug
• Manual Pengguna (dokumen ini)

Image: The Tattu LiPo battery alongside its black packaging box and a small instruction leaflet.

Persediaan

Pemeriksaan Awal

Upon receiving your Tattu LiPo battery, carefully inspect it for any signs of damage, such as swelling, punctures, or damaged wires/connectors. If any damage is observed, do not use the battery and contact customer support.

Caj Pertama

Before first use, it is recommended to fully charge the battery. Use a compatible LiPo balance charger. Connect the main XT60 plug to the charger's output and the JST-XH balance plug to the charger's balance port. Set your charger to the correct cell count (3S for this battery) and charging current (typically 1C, which is 1.8A for an 1800mAh battery). Always monitor the charging process.

Imej: Jarak dekat view of the Tattu LiPo battery's XT60 main connector, JST-XH balance connector, and internal cell configuration (3S1P).

Beroperasi

Menyambung ke Peranti

Ensure your device (e.g., drone, RC vehicle) is powered off before connecting the battery. Connect the XT60 plug of the battery to the corresponding XT60 connector on your device. Ensure a secure connection.

Garis Panduan Pelepasan

Avoid over-discharging your LiPo battery. The minimum safe voltage for a 3S LiPo battery is 3.0V per cell, or 9.0V total. It is highly recommended to stop using the battery when any cell reaches 3.5V-3.7V under load to prolong its lifespan. Over-discharging can permanently damage the battery and reduce its capacity.

Image: The Tattu LiPo battery centrally positioned, surrounded by various drone models it is compatible with, such as the Skylark M4-FPV250, Mini Shredder 200, and QAV250.

Penyelenggaraan

Penyimpanan

Untuk penyimpanan jangka panjang, cas atau nyahcas bateri ke volum storannyatage, typically 3.8V-3.85V per cell (11.4V-11.55V for a 3S battery). Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. A LiPo-safe bag or fireproof container is recommended.

Mengimbangi

Regularly balance charge your LiPo battery to ensure all cells maintain similar voltage levels. This is crucial for battery health and longevity.

Suhu

Avoid operating or charging the battery in extreme temperatures. Optimal operating temperature is between 0°C and 40°C (32°F and 104°F). Do not charge a cold battery; allow it to warm up to room temperature first.

Menyelesaikan masalah

• Bateri Tidak Dicas:
  • Ensure all connections (main and balance leads) are secure.
  • Verify charger settings match battery specifications (3S, LiPo mode).
  • Periksa sebarang kerosakan yang boleh dilihat pada bateri atau pengecas.
• Reduced Flight/Run Time:
  • Battery may be aging or has been over-discharged.
  • Ensure battery is fully balance charged before use.
  • Check for high internal resistance (if your charger can measure it), which indicates battery degradation.
• Bengkak Bateri:
  • Immediately stop using and charging the battery.
  • Move the battery to a safe, non-flammable location.
  • Swelling indicates internal damage, often due to overcharging, over-discharging, or physical impact. The battery should be safely disposed of.

Spesifikasi

Detailed specifications for the Tattu 11.1V 1800mAh 3S 45C LiPo Battery Pack:

Image: A graphic displaying the key specifications of the Tattu 1800mAh LiPo battery, including capacity, voltage, discharge rate, cell configuration, connector types, and weight.

Image: A visual representation of the Tattu LiPo battery's dimensions, showing its length (107mm), width (35mm), and height (21mm), with a note about a ±3mm error tolerance.

Waranti dan Sokongan

Tattu products are manufactured to high standards. For specific warranty information or technical support, please refer to the official Tattu webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

Untuk maklumat lanjut, anda boleh melawati Tattu Store on Amazon.