1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your ChiliTec Mini Indoor Motion Detector, Model 21565. Please read this manual carefully before installation and use to ensure proper function and safety.
2. Maklumat Keselamatan
- Keselamatan Elektrik: Installation must be performed by a qualified electrician or competent person in accordance with local wiring regulations. Always disconnect power at the main circuit breaker before installation or maintenance.
- Penggunaan Dalaman Sahaja: This device is rated IP20 and is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Voltage: Operate only with 230V AC, 50Hz power supply.
- Kapasiti Muatan: Do not exceed the maximum load capacity of 800W for incandescent bulbs or 200W for LED/ESL lamps.
- Kanak-kanak: Jauhkan daripada kanak-kanak.
3. Produk Lebihview
The ChiliTec Mini Indoor Motion Detector (Model 21565) is a compact, discreet sensor designed for automatic light control in various indoor applications. Its small size allows for nearly invisible flush mounting.
Komponen:
- Unit Kawalan: The main module containing the electronics and adjustment switches. Dimensions: 56 x 34 x 25 mm.
- Ketua Sensor: The small, round detection unit. Dimensions: 24 x Ø 15 mm, with an 18 cm connection cable to the control unit.
- Pendawaian: 3-wire connection for power input and load output.
Imej 1: Selesaiview of the ChiliTec Mini Motion Detector, showing the control unit, sensor head, and connecting wires.
Image 2: Diagram illustrating the dimensions of the control unit and sensor, along with cable lengths for installation. The sensor head requires a Ø 12mm installation hole.
4. Spesifikasi
| Nombor Model | 21565 |
| Vol Operasitage | 230V AC, 50Hz |
| Penggunaan Kuasa Siap Sedia | 0.75W |
| Sudut Pengesanan | 360° |
| Julat Pengesanan | Up to 6 meters (adjustable) |
| Ketinggian Pemasangan | 2 - 3 meter |
| Switching Capacity (Resistive Load) | 10 - 800W |
| Switching Capacity (LED/ESL) | Max 200W |
| Adjustable Switching Duration | 5s, 30s, 1min, 3min, 5min, 8min |
| Adjustable Light Sensitivity | Yes (response time 0.8-1.8 ms) |
| Penarafan IP | IP20 (Penggunaan dalaman sahaja) |
| Control Unit Dimensions (L x W x H) | 56 x 34 x 25 mm |
| Sensor Head Dimensions (H x Ø) | 24 x Ø 15 mm |
| Panjang Kabel Sensor | 18 sm |
| Panjang Kabel Kuasa | 15 cm (3-wire) |
5. Pemasangan
Penting: Ensure power is disconnected at the main circuit breaker before beginning installation.
5.1 Lokasi Pemasangan
- The sensor can be flush-mounted in ceilings, walls, or cabinets.
- Recommended installation height is between 2 and 3 meters for optimal detection.
- Avoid mounting near heat sources (e.g., vents, radiators) or in direct sunlight, as this can cause false triggers.
- Pastikan kawasan pengesanan bebas daripada halangan.
Image 3: The small sensor head discreetly flush-mounted in a white ceiling or wall, demonstrating its inconspicuous design.
5.2 Arahan Pendawaian
The motion detector uses a 3-wire connection system. Refer to the diagram below for correct wiring.
- Drill a hole of approximately Ø 12mm for the sensor head at the desired mounting location.
- Insert the sensor head into the drilled hole.
- Connect the control unit to the main power supply and the load (e.g., light fixture) as follows:
- Brown Wire (L): Connect to Live (Phase) input (230V AC).
- Blue Wire (N): Connect to Neutral input.
- Red Wire (L'): Connect to the Live (Phase) input of your light fixture or other load. The Neutral of the load should connect directly to the main Neutral.
- Pastikan semua sambungan selamat dan terlindung.
- Place the control unit in a suitable flush-mounted box or cavity.
Image 4: The control unit showing the wiring terminals and dip switches for settings adjustment.
6. Operating Instructions and Settings
The motion detector features adjustable settings for light sensitivity and switching duration, controlled via dip switches on the control unit.
6.1 Light Sensitivity Adjustment
The light sensitivity determines at what ambient light level the motion detector will activate. This allows the light to only switch on when it is dark enough.
- Refer to the dip switches labeled with a sun/moon icon or similar.
- Adjust the switches to set the desired lux level. A higher setting means the light will activate even in brighter conditions, while a lower setting means it will only activate in darker conditions.
- The response time for light detection is 0.8-1.8 ms.
6.2 Switching Duration Adjustment
The switching duration (time delay) determines how long the connected light remains on after the last detected motion.
- Refer to the dip switches labeled with time values (e.g., 5s, 30s, 1', 3', 5', 8').
- Select the desired duration: 5 seconds, 30 seconds, 1 minute, 3 minutes, 5 minutes, or 8 minutes.
Image 5: Close-up of the control unit's dip switches, used to adjust the light sensitivity and the duration the connected light stays on after motion detection.
7. Penyelenggaraan
- Pembersihan: Clean the sensor head and control unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Pemeriksaan: Periksa sambungan pendawaian secara berkala untuk kesesakan dan tanda-tanda haus.
- No user-serviceable parts inside. Do not attempt to open the control unit.
8. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | No power; incorrect wiring; light sensitivity set too high (too bright); faulty bulb. | Check power supply; verify wiring connections; adjust light sensitivity setting; test/replace bulb. |
| Lampu kekal menyala secara berterusan. | Constant motion in detection area; faulty sensor; incorrect wiring. | Ensure no continuous motion; check sensor placement; verify wiring. |
| Light turns on/off randomly (false triggers). | Heat sources in detection area; drafts; sensor too sensitive; light changes. | Relocate sensor away from heat/drafts; adjust sensitivity setting; ensure stable ambient light. |
| Detection range is too short/long. | Incorrect installation height; sensitivity setting. | Verify installation height (2-3m); adjust sensitivity if possible (though not explicitly stated as adjustable for range, light sensitivity can affect perceived range). |
If problems persist after attempting these solutions, contact customer support or a qualified electrician.
9. Waranti dan Sokongan
Specific warranty information is typically provided with your purchase documentation. For technical support or warranty claims, please contact your retailer or the manufacturer, ChiliTec GmbH.
Pengeluar: ChiliTec GmbH
model: 21565
ASIN: B012ADAQIU
