WORX WG518 12 Amp 2-Speed Electric Leaf Blower/Mulcher/Vacuum Instruction Manual

Produk Selesaiview

The WORX WG518 is a versatile 3-in-1 electric tool designed for efficient yard maintenance, functioning as a leaf blower, mulcher, and vacuum. It features a powerful 12 Amp motor and a durable metal impeller for effective debris management.

Ciri-ciri Utama:

• 250 MPH Air Speed: Provides strong airflow for clearing debris.
• 2992.2 GAL/MIN Air Flow: High volume airflow for quick cleanup.
• AC Supply Handheld: Corded electric operation ensures continuous power without battery limitations.
• 16:1 Mulch Ratio: Efficiently reduces leaves and debris into fine particles, maximizing collection bag capacity.
• Ringan dan Mudah Digunakan: Direka untuk pengendalian yang selesa semasa penggunaan yang berpanjangan.
• 2-Pin Power Plug & Cord Retainer: Compatible with extension cords (sold separately) and features a retainer to prevent accidental disconnection.
• Kelajuan Boleh Laras: Two-speed settings for versatility in various tasks.

Persediaan dan Perhimpunan

The WORX WG518 is designed for easy assembly and conversion between its functions. Follow these steps for initial setup and mode switching.

Converting to Vacuum/Mulcher Mode:

1. Ensure the unit is unplugged from the power source.
2. Attach the vacuum tube to the main unit's intake port. Ensure it clicks securely into place.
3. Connect the leaf collection bag to the exhaust port. The bag typically attaches with a quick-release mechanism. Ensure it is firmly attached to prevent debris leakage.
4. Adjust the mode selector switch to the "Vacuum" position.

Image: The WORX WG518 unit configured for vacuuming, showing the main body, vacuum tube, and attached collection bag.

Converting to Blower Mode:

1. Ensure the unit is unplugged from the power source.
2. Remove the leaf collection bag and the vacuum tube.
3. Attach the blower nozzle to the unit's exhaust port. Ensure it is securely fastened.
4. Place the fan cover over the intake port (where the vacuum tube was attached) to prevent debris from entering the impeller during blowing.
5. Adjust the mode selector switch to the "Blower" position.

Image: The WORX WG518 unit configured for blowing, showing the main body with the blower nozzle attached and the intake port covered.

Arahan Operasi

Before operating, ensure all attachments are securely in place and the unit is properly connected to a suitable extension cord (120V AC supply). Always wear appropriate personal protective equipment, including safety glasses and hearing protection.

Menghidupkan dan Kawalan Kelajuan:

• Connect the 2-pin power plug to a compatible extension cord. Use the cord retainer to prevent accidental disconnection.
• The unit features a 2-speed switch. Slide the switch to position 'I' for low speed or 'II' for high speed.
• To turn off the unit, slide the switch to position '0'.

Using as a Leaf Blower:

• With the blower nozzle attached, direct the airflow towards leaves and debris to clear surfaces like driveways, patios, or lawns.
• Use the lower speed setting for delicate areas or light debris, and the higher speed for heavier or stubborn piles.

Image: An individual operating the WORX WG518 in blower mode, directing airflow to clear leaves from a paved area.

Using as a Mulcher/Vacuum:

• With the vacuum tube and collection bag attached, guide the vacuum tube over leaves and small debris. The unit will suck them up and mulch them into the bag.
• Avoid vacuuming large sticks, rocks, or wet, heavy debris to prevent clogging or damage to the impeller.
• Monitor the collection bag and empty it when full to maintain optimal suction and prevent strain on the motor. The bag typically has a zipper for easy emptying.

Image: The WORX WG518 unit in vacuum mode, showing the attached collection bag and the power cord connected, ready for operation.

Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your WORX WG518. Always unplug the unit before performing any maintenance.

• Membersihkan Pendesak: Periodically check the impeller area for any lodged debris, especially after vacuuming. Remove the vacuum tube and fan cover, and carefully clear any obstructions.
• Collection Bag Care: Empty the collection bag regularly. If the bag becomes dirty, it can be cleaned with mild soap and water, then air-dried completely before reattaching.
• Pembersihan Am: Lap bahagian luar unit dengan iklanamp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan Kord: Regularly inspect the power cord and extension cord for any signs of damage, cuts, or fraying. Replace damaged cords immediately.

Menyelesaikan masalah

If you encounter issues with your WORX WG518, refer to the following common troubleshooting tips:

• Unit Tidak Bermula:
  • Ensure the power cord and extension cord are securely plugged into a working outlet.
  • Periksa sama ada suis kuasa berada dalam kedudukan 'ON'.
  • Verify that the fan cover (in blower mode) or vacuum tube (in vacuum mode) is correctly installed and the safety interlocks are engaged.
• Reduced Suction/Blowing Power:
  • Check the collection bag for fullness and empty if necessary.
  • Inspect the vacuum tube, blower nozzle, and impeller area for clogs. Clear any obstructions carefully after unplugging the unit.
  • Ensure all attachments are securely connected.
• Unit Clogs Frequently:
  • Avoid vacuuming wet, heavy leaves or large debris or sticks and rocks.
  • Rake leaves into smaller, manageable piles before vacuuming.
  • Clean the impeller regularly, especially after processing damp bahan.

Spesifikasi

Waranti dan Sokongan

WORX products are developed with a focus on sustainability, innovation, and customer benefit. The WORX WG518 comes with a Waranti terhad 3 tahun untuk alat ini. For detailed warranty information, product registration, or technical support, please refer to the official WORX webtapak atau hubungi perkhidmatan pelanggan.

Untuk bantuan lanjut, lawati WORX Store.