Manual Pengguna Pengawal Dalaman 8-Stesen Galcon 8118 AC-GQ8

pengenalan

The Galcon 8118 AC-GQ8 is an advanced indoor irrigation and low voltage lighting controller designed for efficient management of your watering and lighting systems. This controller supports up to 8 stations, configurable as 8 irrigation zones or 7 irrigation zones plus 1 low voltage lighting zone. It offers flexible programming options including daily, odd, even, and cyclic schedules, along with a dedicated program for low voltage aplikasi.

Image: The Galcon 8118 AC-GQ8 controller, showing its grey casing, control panel with LCD display, and a protective cover.

Persediaan dan Pemasangan

This section provides instructions for the proper setup and installation of your Galcon 8118 AC-GQ8 controller.

Memasang Pengawal

• Select a suitable indoor location away from direct sunlight, extreme temperatures, and moisture.
• Ensure the location allows for easy access to a standard electrical outlet and irrigation valve wiring.
• Use appropriate screws to securely mount the controller to a wall.

Sambungan Pendawaian

• Sambungan Kuasa: Connect the controller to a standard AC power outlet.
• Pendawaian Injap: Connect each irrigation valve's common wire to the controller's common terminal (C). Connect each individual valve's hot wire to its corresponding station terminal (1-8).
• Master Valve/Pump Start Relay (Optional): If using a master valve or pump start relay, connect its common wire to the common terminal and its hot wire to the designated master valve terminal (M).
• Sensor Input (Optional): The controller supports various sensors (rain, temperature, wind, soil). Connect sensor wires to the dedicated sensor terminals as per the sensor's instructions.
• Vol. Rendahtage Lighting (Optional): Untuk vol rendahtage lighting applications, a separate relay is required (not included). Connect the relay to the designated low voltage output terminal (X) and common.

Pastikan semua sambungan selamat dan terlindung untuk mengelakkan litar pintas.

Arahan Operasi

This section details how to program and operate your Galcon 8118 AC-GQ8 controller for irrigation and low voltage pencahayaan.

Menetapkan Masa dan Tarikh Semasa

• Rotate the dial to the "SET CLOCK" position.
• Use the arrow buttons to adjust the time and date.
• Press "ENTER" or rotate the dial to save settings.

Programming Irrigation Programs (A, B, C)

The controller offers three independent irrigation programs (A, B, C) with flexible scheduling options.

1. Pilih Program: Rotate the dial to "PROGRAM A", "PROGRAM B", or "PROGRAM C".
2. Tetapkan Masa Mula: Each program can have up to 4 start times. Rotate the dial to "START TIME" and use arrow buttons to set.
3. Set Station Run Times: Rotate the dial to "RUN TIME". Select each station (1-8) and set its irrigation duration from 1 minute to 4 hours.
4. Tetapkan Hari Penyiraman: Rotate the dial to "WATERING DAYS". Choose from:
   • Harian: Select specific days of the week.
   • ganjil: Waters on odd-numbered days.
   • Malah: Waters on even-numbered days.
   • Cyclic: Waters every 1 to 31 days. Set the cycle length.

Pelarasan Bermusim

Adjust all program run times simultaneously from 10% to 190% of their set duration.

• Rotate the dial to "SEASONAL ADJUST".
• Use arrow buttons to set the desired percentage.

Fungsi Kelewatan Hujan

Temporarily suspend irrigation for up to 240 days.

• Rotate the dial to "RAIN DELAY".
• Use arrow buttons to set the number of delay days.

Vol. Rendahtage Lighting Program (X)

This program operates independently of irrigation schedules.

• Rotate the dial to "PROGRAM X".
• Set the desired ON/OFF times for the low voltage pencahayaan.

Manual Operation / System Test

To manually run a station or test the system:

• Rotate the dial to "MANUAL".
• Select the desired station and set its run time.
• The controller will activate the selected station immediately.

Penyelenggaraan

Penyelenggaraan yang betul memastikan jangka hayat dan prestasi optimum pengawal anda.

• Pembersihan: Wipe the controller's exterior with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Bekalan Kuasa: Ensure the power supply is stable. In areas prone to power surges, consider using a surge protector.
• Bateri tambahan: The controller may use a 9V battery for program retention during power outages. Check and replace the battery annually or as needed.
• Pemeriksaan Pendawaian: Periodically inspect all wiring connections for corrosion or damage.

Menyelesaikan masalah

This section addresses common issues you might encounter with your Galcon 8118 AC-GQ8 controller.

If issues persist after following these steps, contact Galcon customer support.

Spesifikasi

• Nombor Model: GAEDS2U0258
• Bilangan Stesen: 8 (7 irrigation + 1 low voltage lighting, or 8 irrigation)
• Program: 3 (A, B, C) for irrigation, 1 (X) for low voltage pencahayaan
• Masa Mula setiap Program: Sehingga 4
• Tempoh Pengairan: 1 minit hingga 4 jam
• Cyclic Watering: Every 1 to 31 days
• Pelarasan Bermusim: 10% hingga 190%
• Kelewatan Hujan: Sehingga 240 hari
• Input Sensor: Compatible with rain, temperature, wind, soil sensors
• Sumber Kuasa: AC (details not specified, assuming standard household current)
• Bateri: 1 x 9V battery required (for program retention)
• Dimensi Produk: 6.1 x 19.81 x 25.65 cm
• Berat Barang: 680.39 g (1.5 Paun)
• Jenis Paparan: LCD atau LED
• warna: Kelabu
• Pengeluar: Galcon

Waranti dan Sokongan

For information regarding product warranty, technical support, or service, please refer to the official Galcon webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.

Galcon Contact Information: Sila layari www.galcon.co.il for the most up-to-date support resources and contact details.