Paulmann 400.30 AGL Halogen Lamp 42W B22d Jernih - Manual Arahan

1. Pengenalan

Thank you for choosing the Paulmann 400.30 AGL Halogen Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new halogen bulb. Please read these instructions carefully before use and retain them for future reference.

2. Arahan Keselamatan

• Keselamatan Elektrik: Always disconnect power before installing, removing, or cleaning the lamp. Ensure your hands are dry when handling electrical components.
• Wat yang betultage: Jangan melebihi wat maksimumtage specified for your light fixture. This lamp ialah 42W.
• Lamp Pangkalan: Pastikan lamp base (B22d) matches your fixture's socket type.
• haba: Halogen lamps generate significant heat. Avoid touching the lamp directly when it is on or immediately after it has been switched off. Allow sufficient cooling time.
• Pelupusan: Buang bekas lamps mengikut peraturan tempatan.
• Penggunaan Dalaman: l iniamp is designed for indoor use unless otherwise specified by the fixture.

3. Produk Lebihview

The Paulmann 400.30 is a clear AGL (General Lighting Service) halogen lamp designed for standard B22d bayonet cap fittings. It provides 42 watts of illumination and is compatible with R, L, C universal dimmers.

Rajah 1: Paulmann 400.30 AGL Halogen Lamp with B22d base. This image shows the clear glass bulb and the bayonet cap base with two pins for secure fitting into compatible light fixtures.

Rajah 2: Energy efficiency label for Paulmann 400.30, indicating an energy rating of D and consumption of 42 kWh/1000h.

4. Persediaan dan Pemasangan

1. Matikan: Ensure the power supply to the light fixture is completely switched off at the main circuit breaker before beginning installation.
2. Sejukkan Diri: If replacing an existing bulb, allow the old bulb to cool down completely before touching it.
3. Sisipkan Mentol: Align the two pins on the B22d base of the Paulmann 400.30 lamp with the slots in the light fixture's socket. Push the bulb gently into the socket and twist clockwise until it locks securely into place.
4. Pulihkan Kuasa: Once the bulb is securely installed, restore power to the light fixture.

5. Arahan Operasi

To operate the Paulmann 400.30 halogen lamp, simply switch on the power to the light fixture. This lamp is designed to be compatible with R, L, C universal dimmers, allowing you to adjust the light intensity if your fixture and dimmer switch support this functionality. Refer to your dimmer's instructions for specific operation details.

6. Penyelenggaraan

• Pembersihan: Pastikan lamp is switched off and completely cool before cleaning. Gently wipe the glass bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
• Penggantian: Apabila lamp reaches the end of its lifespan, follow the installation steps in reverse to remove the old bulb, ensuring power is off and the bulb is cool. Install a new Paulmann 400.30 or an equivalent B22d 42W halogen lamp.

7. Penyelesaian masalah

• Lamp Tidak Menyala:
  • Periksa sama ada bekalan kuasa ke lekapan dihidupkan.
  • Pastikan lamp is correctly seated and twisted securely in the socket.
  • Sahkan bahawa lamp is not faulty by testing it in another compatible fixture or trying a new lamp in the current fixture.
  • Periksa pemutus litar untuk lekapan.
• Lamp berkelip-kelip:
  • Pastikan lamp dipasang dengan selamat.
  • If using a dimmer, ensure it is compatible with halogen lamps and functioning correctly.
  • Periksa pendawaian yang longgar pada lekapan atau suis (rujuk juruelektrik yang berkelayakan jika tidak pasti).

8. Spesifikasi

9. Waranti dan Sokongan

Paulmann products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or visit the official Paulmann website. For technical support or inquiries, please contact Paulmann customer service through their official channels.

Webtapak: www.paulmann.com