Xilence A402 AMD CPU Air Cooler User Manual

1. Pengenalan

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Xilence A402 AMD CPU Air Cooler. Please read this manual carefully before proceeding with installation to ensure proper function and longevity of your product.

2. Kandungan Kotak

Sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:

• 1 x A402 AMD Cooler (Heatsink)
• 1 x 92 mm PWM Fan (pre-assembled)
• 2 x Fan Brackets (pre-assembled)
• 1 x AMD Click Brackets (pre-assembled)
• 1 x Tube of Thermal Compound
• 4 x Mounting Screws (pre-assembled)

3. Persediaan dan Pemasangan

The Xilence A402 cooler is designed for easy installation on compatible AMD sockets. Follow these general steps for installation:

1. Prepare the CPU and Motherboard: Ensure your CPU is properly seated in the socket. Clean the CPU surface thoroughly to remove any old thermal paste or debris.
2. Apply Thermal Compound: Apply a small amount of the provided thermal compound to the center of the CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient. Do not spread it manually; the pressure from the cooler will distribute it evenly.
3. Letakkan Penyejuk: Align the cooler's base with the CPU. The direct touch heatpipes should make full contact with the CPU surface.
4. Selamatkan Penyejuk: The cooler utilizes AMD Click Brackets. Hook one side of the cooler's mounting clip onto the corresponding tab of the AMD retention module on your motherboard. Apply firm, even pressure to the opposite side of the cooler and hook the second clip onto the other tab of the retention module. Ensure both clips are securely latched. This process may require some force to ensure proper contact pressure.
5. Sambungkan Kipas: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Ensure the connection is secure.

4. Arahan Operasi

The Xilence A402 is designed for efficient and quiet operation, suitable for moderate cooling requirements in office, home, and gaming environments.

• Automatic Fan Control (PWM): The included 92mm fan is PWM (Pulse Width Modulation) regulated. This allows your motherboard to automatically adjust the fan speed based on CPU temperature, ensuring optimal cooling performance while minimizing noise.
• Prestasi Terma: The cooler is rated for a Thermal Design Power (TDP) of up to 130 watts, making it effective for a wide range of AMD multi-core processors.
• Operasi senyap: The fan operates within a low noise range of 14 - 23.8 dB(A), providing a quiet computing experience.

5. Penyelenggaraan

Regular maintenance helps ensure optimal performance and extends the lifespan of your CPU cooler.

• Penyingkiran habuk: Periodically inspect the heatsink fins and fan blades for dust accumulation. Dust can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush to gently remove dust. Ensure the fan is not spinning rapidly when cleaning with compressed air to prevent damage to the bearing.
• Tampal Terma: The thermal compound typically lasts for several years. If you remove the cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler base and apply a fresh layer before reinstallation.

6. Penyelesaian masalah

If you encounter issues with your Xilence A402 CPU cooler, consider the following common problems and solutions:

• Suhu CPU Tinggi:
  • Ensure the cooler is securely mounted and making full contact with the CPU. Re-seat if necessary.
  • Verify that thermal paste was applied correctly and is evenly spread. Reapply if needed.
  • Check for dust buildup on the heatsink fins and fan blades. Clean thoroughly.
  • Confirm the fan is spinning. If not, check the fan cable connection to the motherboard's CPU_FAN header.
• Fan Not Spinning or Spinning Slowly:
  • Check the 4-pin fan cable connection to the motherboard.
  • Ensure the CPU_FAN header is enabled in your motherboard's BIOS/UEFI settings.
  • Verify that the fan is not obstructed by cables or other components.
• Bunyi Kipas Berlebihan:
  • Check for dust buildup on the fan blades.
  • Ensure the fan is securely attached to the heatsink and not vibrating against other components.
  • Adjust fan speed curves in your motherboard's BIOS/UEFI settings if the noise is consistently high at low temperatures.

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information and technical support, please refer to the Xilence official webtapak atau hubungi tempat pembelian anda. Simpan bukti pembelian anda untuk tuntutan jaminan.