Manual Pengguna Set Tang Circlip Sealey AK8453

pengenalan

This manual provides essential instructions for the safe and effective use of your Sealey AK8453 Circlip Pliers Set. Please read this manual thoroughly before operation and retain it for future reference.

Maklumat Keselamatan

Always wear appropriate personal protective equipment, such as safety glasses, when using this tool. Ensure the workpiece is stable and secure. Do not use the pliers for purposes other than those for which they are designed. Keep out of reach of children.

Produk Selesaiview

The Sealey AK8453 is a versatile circlip pliers set designed for both internal and external circlip applications. It features a quick-change mechanism and comes with various tips for different circlip sizes and orientations.

Rajah 1: The Sealey AK8453 Circlip Pliers Set, showing the main tool with red handles and the quick-change mechanism.

Ciri-ciri Utama:

• Quick-change internal/external switch mechanism.
• Constructed from durable Chrome Vanadium steel.
• Supplied with multiple tip sets: one set of double-end straight tips (1.2mm and 1.8mm) and two sets of 90° tips (1.2mm and 1.8mm).
• Tips are secured with grub screws for stability.
• Comfort grip vinyl-dipped handles.
• Integrated storage for spare tips and hex key within the handles.

Persediaan

1. Selecting and Installing Tips:

1. Identify the appropriate tip size and angle (straight or 90°) required for your specific circlip. The set includes 1.2mm and 1.8mm tips.
2. Locate the grub screw on the pliers' head that secures the tips. Use the supplied hex key to loosen this screw.
3. Carefully insert the desired tips into the plier jaws. Ensure they are fully seated.
4. Tighten the grub screw firmly with the hex key to secure the tips in place. Do not overtighten.

Rajah 2: A hand demonstrating the process of inserting a tip into the plier jaw, with other tips laid out nearby.

Rajah 3: jarak dekat view of a hand securing a 90-degree tip into the plier head using the hex key and grub screw.

2. Switching Between Internal and External Modes:

The pliers feature a quick-change switch mechanism to convert between internal (spreading) and external (compressing) circlip applications.

• Locate the small lever or switch near the pivot point of the pliers.
• Move the lever to the "INT" position for internal circlips (pliers open when handles are squeezed).
• Move the lever to the "EXT" position for external circlips (pliers close when handles are squeezed).

Arahan Operasi

1. For Internal Circlips:

1. Ensure the pliers are set to the "INT" mode.
2. Insert the tips into the holes of the internal circlip.
3. Gently squeeze the handles to spread the circlip, allowing it to be removed or installed into its groove.
4. Release the handles slowly once the circlip is in position.

2. For External Circlips:

1. Ensure the pliers are set to the "EXT" mode.
2. Insert the tips into the holes of the external circlip.
3. Gently squeeze the handles to compress the circlip, allowing it to be removed or installed from its shaft.
4. Release the handles slowly once the circlip is in position.

Rajah 4: The circlip pliers in use, compressing an external circlip on a component.

Penyelenggaraan

• Pembersihan: After each use, wipe the pliers clean with a dry cloth to remove any dirt, grease, or debris.
• Pelinciran: Periodically apply a light oil to the pivot points and the quick-change mechanism to ensure smooth operation.
• Pemeriksaan Petua: Regularly inspect the tips for wear, bending, or damage. Replace worn or damaged tips immediately to prevent injury or damage to circlips.
• Storan: Store the pliers in a dry, clean environment. Utilize the integrated handle storage for spare tips and the hex key to keep them organized and prevent loss.

Menyelesaikan masalah

• Pliers not opening/closing smoothly:

  Check for debris in the pivot mechanism. Apply lubricant to the pivot points. Ensure the quick-change switch is fully engaged in either "INT" or "EXT" position.
• Tips slipping from circlip:

  Verify that the correct tip size is being used for the circlip. Ensure tips are securely tightened with the grub screw. Inspect tips for wear or damage and replace if necessary.

• Difficulty changing internal/external mode:

  Ensure the pliers are fully open or closed when attempting to switch modes. Apply a small amount of lubricant to the switch mechanism if it feels stiff.

Spesifikasi

Waranti dan Sokongan

For warranty information and customer support, please refer to the official Sealey website or contact your authorized Sealey dealer. Keep your purchase receipt as proof of purchase.

Sealey Official Webtapak: www.sealey.co.uk